Addition reaction and characterization of chlorotris(triphenylphosphine)iridium(I) on silicon(1 1 1) surfaces

Studies were performed to determine the chemical addition of a metal complex molecule, chlorotris(triphenylphosphine)iridium(I), on hydrogen passivated Si(1 1 1) surfaces to form a self-assembled monolayer (SAM). The iridium complex was synthesized prior to chemical addition, for which modified reaction conditions were chosen. Following addition, the silicon surfaces were characterized with X-ray photoelectron spectroscopy (XPS) and cyclic voltammetry (CV). The XPS results revealed that the surfaces consisted of the expected elemental percentages and that the iridium has a slightly higher success rate at attaching to oxide-free surfaces. XPS data also strongly indicate that the iridium complex remained intact upon chemisorption and did not decompose during the addition reaction. CV data show a difference between iridium treated surfaces and control samples. Hydrogen passivated wafers with iridium complex were much more conductive than those which were terminated with just an oxide or with an oxide and iridium complex. Furthermore, no free iridium reagent was detected as an additional feature in the current profile, indicating there was no physisorbed layer.     

Far‐ and Mid‐Infrared Spectroscopic Analysis of the Substrate‐Induced Structural Dynamics of Respiratory Complex I

The catalytic activity of the respiratory NADH:ubiquinone oxidoreductase (complex I) is based on conformational reorganizations. Herein we probe the effect of substrates on the conformational flexibility of complex I by means of ¹H/²H exchange kinetics at the level of the amide proton in the mid‐infrared spectral range (1700–1500 cm^?1). Slow, medium, and fast exchanging domains are distinguished that reveal different accessibilities to the solvent. Whereas amide hydrogens undergo rapid exchange with the solvent in an open structure, hydrogens experience much slower exchange when they are involved in H‐bonded structures or when they are sterically inaccessible for the solvent. The results indicate a structure that is more open in the presence of both NADH and quinon. Complementary information on the overall internal hydrogen bonding of the protein was probed in the far infrared (300–30 cm^?1), a spectral range that includes a continuum mode of the hydrogen bonding signature.     

Microengineered PEG Hydrogels: 3D Scaffolds for Guided Cell Growth

Designing three‐dimensional (3D) scaffolds for selective manipulation of cell growth is of high relevance for applications in regenerative medicine. Especially, scaffolds with oriented morphologies bear high potential to guide the restoration of specific tissues. The fabrication of hydrogel scaffolds that support long‐term survival, proliferation, and unidirectional growth of embedded cells is presented here. Parallel channel structures are introduced into the bulk hydrogels by uniaxial freezing, providing stable, and uniform porosity suitable for cell invasion (pore diameters of 5–15 µm). In vitro assessment of the scaffolds with murine fibroblasts (NIH L929) shows a remarkable unidirectional movement along the channels, with the cells traveling several millimeters through the hydrogel.

     

Self-assembly of 5,11,17,23-tetranitro-25,26,27,28-tetramethoxythiacalix[4]arene with neutral molecules and its use for anion recognition

Methylation of 5,11,17,23-tetranitrothiacalix[4]arene with diazomethane leads to the tetramethoxy derivative, which was studied using single-crystal X-ray crystallography. It revealed that this compound, albeit in the 1,3-alternate conformation, can form the inclusion complexes with various solvent molecules possessing acidic methyl groups (ethyl acetate, nitromethane, acetone, acetonitrile) and creates interesting infinite channels filled with solvent molecules. The subsequent transformation of nitro groups into the ureido moieties gave receptors capable of anion recognition even in a highly HB-competitive solvent like DMSO.     

Recrystallization of 223Ra with barium sulfate

In this work, the kinetics of barium sulfate recrystallization has been studied in acidic 0.01 mol dm^?3 sodium sulfate solution using ²²³Ra and ¹³³Ba tracers at very low total radium concentration, i.e. less than 10^?13 mol dm^?3. It was found that the system follows the homogeneous recrystallization model and that recrystallization rates, inferred by the decrease of ²²³Ra and ¹³³Ba in the aqueous solution, are fast. Therefore, even at very low concentrations, below the solubility limit, radium will be retained by barium sulfate—a mineral present in the deep underground repository.     

Method development and inter-laboratory comparison about the determination of titanium from titanium dioxide nanoparticles in tissues by inductively coupled plasma mass spectrometry

Nanosized titanium dioxide (TiO₂) is one of the most interesting and valuable nanomaterials for the construction industry but also in health care applications, food, and consumer goods, e.g., cosmetics. Therefore, the properties associated with this material are described in detail. Despite its widespread use, the analytical determination and characterization of nanosized metal oxides is not as straightforward as the comparatively easy-to-detect metallic nanoparticles (e.g., silver or gold). This study presents the method development and the results of the determination of tissue titanium (Ti) levels after treatment of rats with the nanosized TiO₂. Total Ti levels were chosen to evaluate the presence and distribution of TiO₂ nanoparticles. A procedure consisting of incubation with a mixture of nitric acid (HNO₃) and hydrofluoric acid (HF), and heating was developed to digest tissues and TiO₂ nanomaterials in order to determine the total Ti content by inductively coupled plasma mass spectrometry (ICPMS). For the inter-laboratory comparison, altogether four laboratories analyzed the same samples upon digestion using the available ICPMS equipment. A major premise for any toxicokinetic study is the possibility to detect the chemical under investigation in biological samples (tissues). So, the study has to be performed with a dose high enough to allow for subsequent tissue level measurement of the chemical under investigation. On the other hand, dose of the chemical applied should not induce over toxicity in the animal as this may affect its absorption, distribution, metabolism, and excretion. To determine a non-toxic TiO₂ dosage, an acute toxicity study in rats was performed, and the organs obtained were evaluated for the presence of Ti by ICPMS. Despite the differences in methodology and independent of the sample preparation and the ICPMS equipment used, the results obtained for samples with Ti concentrations >4 μg Ti/g tissue agreed well.

Combined QCM-D/GE as a tool to characterize stimuli-responsive swelling of and protein adsorption on polymer brushes grafted onto 3D-nanostructures

A combined setup of quartz crystal microbalance and generalized ellipsometry can be used to comprehensively investigate complex functional coatings comprising stimuli-responsive polymer brushes and 3D nanostructures in a dynamic, noninvasive in situ measurement. While the quartz crystal microbalance detects the overall change in areal mass, for instance, during a swelling or adsorption process, the generalized ellipsometry data can be evaluated in terms of a layered model to distinguish between processes occurring within the intercolumnar space or on top of the anisotropic nanocolumns. Silicon films with anisotropic nanocolumnar morphology were prepared by the glancing angle deposition technique and further functionalized by grafting of poly-(acrylic acid) or poly-(N- isopropylacrylamide) chains. Investigations of the thermoresponsive swelling of the poly-(N-isopropylacrylamide) brush on the Si nanocolumns proved the successful preparation of a stimuli-responsive coating. Furthermore, the potential of these novel coatings in the field of biotechnology was explored by investigation of the adsorption of the model protein bovine serum albumin. Adsorption, retention, and desorption triggered by a change in the pH value is observed using poly-(acrylic acid) functionalized nanostructures, although generalized ellipsometry data revealed that this process occurs only on top of the nanostructures. Poly-(N-isopropylacrylamide) is found to render the nanostructures non-fouling properties.     

Phenylene-Bridged Perylene Monoimides as Acceptors for Organic Solar Cells: A Study on the Structure–Property Relationship

A series of non-fullerene acceptors based on perylene monoimides coupled in the peri position through phenylene linkers were synthesized via Suzuki-coupling reactions. Various substitution patterns were investigated using density functional theory (DFT) calculations in combination with experimental data to elucidate the geometry and their optical and electrochemical properties. Further investigations of the bulk properties with grazing incidence wide angle X-ray scattering (GIWAXS) gave insight into the stacking behavior of the acceptor thin films. Electrochemical and morphological properties correlate with the photovoltaic performance of devices with the polymeric donor PBDB-T and a maximum efficiency of 3.17 % was reached. The study gives detailed information about structure–property relationships of perylene-linker-perylene compounds.     

Enantioselective high-performance liquid chromatography of aryl-substituted oxazolines as an efficient tool for determination of chiral purity of serine medicinal components

A new approach for the evaluation of chiral purity of serine esterification products bearing long-chain alkyl substituents was developed. The compounds were simply converted to aryl-substituted oxazolines which: (i) facilitates effective chromatographic enantioseparation and (ii) enables direct detection using ultraviolet absorption. The method employs a polysaccharide-based chiral stationary phase and allows enantioseparation of highly stable oxazoline products in less than 6 min using a simple binary mobile phase. As opposed to the previously used normal phase method the developed method was performed in the reversed-phase mode. Aside from the benefits of switching to less hazardous solvents with regard to the principles of Green Chemistry, this has also led to a reduction in the analysis time. In comparison with known serine chromophores, the best enantioseparation of aryloxazoline rigid structure may be achieved only based on non-polar interactions with the chiral stationary phase. In contrast, the substitution of the chromophore moiety with hydroxyl substituent affected intra and intermolecular interactions that caused enantioseparation differences. Concurrently, we found high chirality retention of (R)- and (S)-configuration oxazoline standards (≥99% enantiomeric excess) during the introduction of the ultraviolet label. The method is suitable for rapid injection of the mixture containing the ultraviolet absorption marker without prior purification.