激光相位成像雷达的研究

利用无合作目标漫反射激光相位测距的原理,对关键单元技术进行分析和设计,研制成一种用于自主式车辆视觉导引的激光相位成像雷达的原理样机.     

Selective saturation and inversion of multiple resonances in high-resolution solid-state 13C experiments using slow spinning CP/MAS and tailored DANTE pulse sequences.

Taking advantage of the long 13C T1 values generally encountered in solids, selective saturation and inversion of more than one resonance in 13C CP/MAS experiments can be achieved by sequentially applying several DANTE pulse sequences centered at different transmitter frequency offsets. A new selective saturation pulse sequence is introduced composed of a series of 90 degrees DANTE sequences separated by interrupted decoupling periods during which the selected resonance is destroyed. Applications of this method, including the simplification of the measurement of the principal values of the 13C chemical shift tensor under slow MAS conditions, are described. The determination of the aromaticity of coal using a relatively slow MAS rate is also described.     

Paper-like Microfibrous Nickel Catalyst for Hydrogen Production via NH3 Decomposition in Fuel Cell Applications

Recently, miniature H2 generator to power fuel cells for portable/micro electronic devices and passenger propulsion has been the focus of intense research activities1-3. One of the strategies is to find simple CO-free H2 production with novel microreactor…     

MORPHOLOGY OF BLACK CARBON AEROSOLS AND UBIQUITY OF 50-NANOMETER BLACK CARBON AEROSOLS IN THE ATMOSPHERE

Different-sized aerosols were collected by an Andersen air sampler to observe the detailed morphology of the black carbon （BC） aerosols which were separated chemically from the other accompanying aerosols, using a Scanning Electron Microscope equipped with an Energy Dispersive X-ray Spectrometer （SEM-EDX）. The results indicate that most BC aerosols are spherical particles of about 50 nm in diameter and with a homogeneous surface. Results also show that these particles aggregate with other aerosols or with themselves to form larger agglomerates in the micrometer range. The shape of these 50-nm BC spherical particles was found to be very similar to that of BC particles released from petroleum-powered vehicular internal combustion engines. These spherical BC particles were shown to be different from the previously reported fullerenes found using Matrix-Assisted Laser Desorption/Ionization Time-Of-Flight Mass Spectrometry （MALDI-TOF-MS）.     

通过平均场处理的严格重正化群变换方法对Potts模型的应用

本文运用作者所发展的严格docimation- 平均场近似方法对Potts 模型的临界指数作了计算.所得结果与严格解符合得很好, 而与计算工作量相当的重正化群方法相比, 精确度大为提高。 关键词：     

Synthesis and Raman analysis of 1D-ZnO nanostructure via vapor phase growth

1D-nanostructural zinc oxide (ZnO) with different shapes have been synthesized on p-type Si(1 0 0) and glass substrates via vapor phase growth by heating pure zinc powder at temperatures between 480 and 570 °C. The different ZnO nanostructures depend on the substrates and the growth temperatures. Scanning electron microscopy and X-ray diffraction revealed that a well-aligned nanowires array, which are vertical to the substrate of Si(1 0 0) with 18 sides on their heads, but six sides on their stems, has been formed at 480 °C. Raman study on the ZnO nanostructures shows that the coupling strength between electron and phonon determined by the ratio of the second- to the first-order Raman scattering cross-sections declines with decreasing diameter of the nanowires. However, a little changes of the coupling strength in terms of the width of the nanobelts have been observed.     

微球板电子倍增器基体制备技术研究

新型微球板电子倍增器和微通道板相比具有高增益、无离子反馈、制备简单、造价低廉等优点。介绍了微球板电子倍增器的工作原理、特点和广阔的应用前景。由于微球板基体的形成技术是微球板制备的关键技术，论文从理论上研究了微球板基体烧结过程中的烧结速率。并采用自行设计组分的高铅玻璃，用立式炉成珠设备进行了玻璃微珠的制备。探索了微球板制备过程中玻璃微珠的分级技术、微球板电子倍增器基体成型工艺和技术。制备出基本满足要求的微球板电子倍增器基体。给出了制造的样品和文献上样品结构的SEM对比照片，最后对实验过程中的一些现象进行了分析，并给出了实验的结论。     

Tunable narrow-band infrared emitters from hexagonal lattices

In this work, we present both the theoretical basis as well as supporting experimental measurements for development of a novel mid-infrared thermally stimulated narrow band emitter with a spectral bandwidth of less than 10%. To achieve this, we utilize a metallized-surface 2D photonic crystal of air voids in a silicon background with hexagonal structure symmetry. Our results are based on the generation of discrete surface plasmon (SP) modes in the thin metallized layer residing on the top surface. This yields a series of adequately spaced discrete peaks in the reflection spectrum, dominated by a single sharp feature corresponding to the lowest plasmon order, in an otherwise uniform highly reflective spectrum (>90%) over most of the IR spectrum. This, in turn, gives rise to a sharp absorption feature with a correspondingly narrow thermal emission peak in the emission spectrum. Transfer matrix calculations simulate well both the position and strengths of the absorption peaks. By altering the period of the surface photonic lattice, the SP peak and emissive band can be tuned to the desired wavelength. These devices promise a new class of tunable infrared emitters with high power in a narrow spectral bandwidth. Such narrow band sources are critical to achieving high efficiency gas sensors.     

Piezooptical optical bistability

A glass fiber piezooptical optical bistability device is reported.Basing on pho-toelastic and strain effects of single-mode fiber,we have realized piezooptical modulation andperformed experiments of optical bistability.     

Crystal and molecular structures of 1-[3-(3,4-dimethoxyphenyl)-2-propenoyl]pyrrolidine.

The crystal structure of 1-[3-(3,4-dimethoxyphenyl)-2-propenoyl]pyrrolidine (C15H19NO3) (I) has been determined by X-ray analysis. It crystallizes orthorhombic space group Pbca with a = 24.295(3), b = 15.086(3), c = 7.552(3)A, V = 2768(1)A3, Z = 8, Dcalc = 1.254 g/cm3, mu = (Mo K(alpha)) = 0.87 cm(-1). The title compound has analgesic activity of cycloaliphatic amine part. The molecule is deviated from planar configuration.