Characterization of pure phase Zn(II) oxide nanoparticles via thermal decomposition of two zinc(II) complexes of the 6,6′-dimethyl-2,2′-bipyridine ligand

Two zinc(II) complexes [Zn(6,6′-dimethyl-2,2′-bipy)Cl₂] _n (1) and [Zn(6,6′-dimethyl-2,2′-bipy)I₂] _n (2) are synthesized from the reaction of the 6,6′-dimethyl-2,2′-bipy ligand with ZnCl₂ and ZnI₂. Zinc(II) oxide nanoparticles are synthesized by the thermolysis of [Zn(6,6′-dimethyl-2,2′-bipy)Cl₂] _n (1) and [Zn(6,6′-dimethyl-2,2′-bipy)I₂] _n (2) at two different temperatures. The ZnO nanoparticles are characterized by X-ray diffraction and scanning electron microscopy (SEM). SEM images show the average size of the ZnO nanoparticles produced of 50 nm and 60 nm in compounds 1 and 2 respectively.     

Highly sensitive FRET-based fluorescence immunoassay for aflatoxin B1 using cadmium telluride quantum dots

We report on a competitive immunoassay for the determination of aflatoxin B1 using fluorescence resonance energy transfer (FRET) from anti-aflatoxin B1 antibody (immobilized on the shell of CdTe quantum dots) to Rhodamine 123 (Rho 123-labeled aflatoxin B1 bound to albumin). The highly specific immunoreaction between the antibody against aflatoxin B1 on the QDs and the labeled-aflatoxin B1 brings the Rho 123 fluorophore (acting as the acceptor) and the QDs (acting as the donor) in close spatial proximity and causes FRET to occur upon photoexcitation of the QDs. In the absence of unlabeled aflatoxin B1, the antigen-antibody complex is stable, and strong emission resulting from the FRET from QDs to labeled aflatoxin B1 is observed. In the presence of aflatoxin B1, it will compete with the labeled aflatoxin B1-albumin complex for binding to the antibody-QDs conjugate so that FRET will be increasingly suppressed. The reduction in the fluorescence intensity of the acceptor correlates well with the concentration of aflatoxin B1. The feasibility of the method was established by the detection of aflatoxin B1 in spiked human serum. There is a linear relationship between the increased fluorescence intensity of Rho 123 with increasing concentration of aflatoxin B1 in spike human serum, over the range of 0.1–0.6 μmol·mL^?1. The limit of detection is 2?×?10^?11 M. This homogeneous competitive detection scheme is simple, rapid and efficient, and does not require excessive washing and separation steps.

Efficient Method for Oxidation of Ketones to Esters with 4-Aminoperoxybenzoic Acid Supported On Silica Gel

4-Aminoperoxybenzoic acid supported on silica gel was found to be a versatile and efficient oxidant for the oxidation of ketones to esters.     

Pd-Cu–Mediated Synthesis of 2-Substituted Imidazo[1,2-α]pyridines in Water

The reaction of 2-amino-1-(2-propynyl)pyridinium bromide with various iodobenzenes, catalyzed by Pd-Cu, in the presence of sodium lauryl sulfate as the surfactant and cesium carbonate as the base, in water, leads to the formation of 2-substituted imidazo[1,2-α]pyridines.     

The potentials of additive manufacturing for mass production of electrochemical energy systems

Additive manufacturing has established itself as a popular and powerful tool in electrochemistry research and development. In this short review, we focus on the latest results in both 3D printing and electrochemistry communities that could potentially benefit manufacturing in the electrochemical industry. We provide insights from recent and relevant research works and conclude that the likely scenario in the industry is the deployment of a combination of subtractive and additive technologies in order to manufacture high quality and cost-effective electrochemical reactors within reasonable timeframes.     

The effect of 3D printing on the morphological and mechanical properties of polycaprolactone filament and scaffold

Three‐dimensional (3D) printing becomes an attractive technique to fabricate tissue engineering scaffolds through its high control on fabrication and repeatability using the printing parameters. This technique can be combined by the finite element method (FEM), and tissue‐specific scaffolds with desirable morphological and mechanical properties can be designed and manufactured. In this study, the influential 3D printing parameters on the morphological and mechanical properties of polycaprolactone (PCL) filament and scaffold were studied experimentally and numerically. First, the effects of printing parameters and process on the properties of extruded PCL filament were investigated. Then, using FEM, the effects of filament specifications on the overall characteristics of the scaffold were evaluated. Results showed that both the printing process in terms of resting time and remaining time and the printing parameters like pressure, printing speed, and printing path length have influenced the filament properties. In addition, both the filament diameter and elastic modulus had significant effects on the properties of scaffold especially, a 20% increase in the filament diameter caused the scaffold compressive elastic modulus to rise by around 72%. It is concluded that the printing parameters and process must be tuned very well in fabricating scaffolds with the desired morphology and mechanical property.     

Numerical Solution Based on Hat Functions for Solving Nonlinear Stochastic Itô Volterra Integral Equations Driven by Fractional Brownian Motion

This paper presents a numerical method for solving nonlinear stochastic Itô Volterra integral equations driven by fractional Brownian motion with Hurst parameter \( H \in (0,1)\) via of hat functions. Using properties of the generalized hat basis functions and fractional Brownian motion, new stochastic operational matrix of integration is achieved and the nonlinear stochastic equation is transformed into nonlinear system of algebraic equations which by solving it, an approximation solution with high accuracy is obtained. In addition, error analysis of the method is investigated, and by some examples, efficiency and accuracy of the suggested method are shown.     

Monte Carlo simulation of a confined hard ellipse fluid

The structural and thermodynamic properties of a confined hard ellipse fluid are studied using Monte Carlo simulation. The angular, average number densities and order parameters of hard ellipses confined between hard parallel walls are obtained for various bulk densities, aspect ratios and wall separations. The results show that the effect of the existence of the wall on the molecular fluid structure, either on their directions or their locations, with respect to the bulk, especially close to the walls, is significant. For this system the pressure is also obtained and it is shown that the average density at the wall is proportional to the pressure, βP=〈ρ_w〉. Our simulation results show that the order parameters depend on the number of the particles in the box unless it exceeds thousand.     

Evaluation of aortic stenosis severity using 4D flow jet shear layer detection for the measurement of valve effective orifice area

Aims

The objective of this study was to evaluate the potential of 4D flow MRI to assess valve effective orifice area (EOA) in patients with aortic stenosis as determined by the jet shear layer detection (JSLD) method.

Methods and Results

An in-vitro stenosis phantom was used for validation and in-vivo imaging was performed in 10 healthy controls and 40 patients with aortic stenosis. EOA was calculated by the JSLD method using standard 2D phase contrast MRI (PC-MRI) and 4D flow MRI measurements (EOA_JSLD-2D and EOA_JSLD-4D, respectively). As a reference standard, the continuity equation was used to calculate EOA (EOA_CE) with the 2D PC-MRI velocity field and compared to the EOA_JSLD measurements. The in-vitro results exhibited excellent agreement between flow theory (EOA = 0.78 cm²) and experimental measurement (EOA_JSLD-4D = 0.78 ± 0.01 cm²) for peak velocities ranging from 0.9 to 3.7 m/s. In-vivo results showed good correlation and agreement between EOA_JSLD-2D and EOA_CE (r = 0.91, p < 0.001; bias: − 0.01 ± 0.38 cm²; agreement limits: 0.75 to − 0.77 cm²), and between EOA_JSLD-4D and EOA_CE (r = 0.95, p < 0.001; bias: − 0.09 ± 0.26 cm²; limits: 0.43 to − 0.62 cm²).

Conclusion

This study demonstrates the feasibility of measuring EOA_JSLD using 4D flow MRI. The technique allows for optimization of the EOA measurement position by visualizing the 3D vena contracta, and avoids potential sources of EOA_CE measurement variability.     

Variational transition state theory with multidimensional tunnelling and kinetic isotope effects in the reactions of C2H6, C2H5D and C2D6 with .CCl3 to produce CHCl3 and CDCl3

ABSTRACT

Rate constants for the reactions of C₂H₆, C₂H₅D and C₂D₆ with .CCl₃. for the production of CHCl₃ and CDCl₃ (k₁, k₂, k₃ and k₄) were computed using variational transition state theory coupled with hybrid-meta density functional theory (MPWB1K) over the temperature range of 200–2900 K. The ground-state vibrational adiabatic potential was plotted for all channels. Small- and large-curvature tunnelling were determined to include quantum effects in the calculation of rate constants. Harmonic vibrational frequencies along the reaction path were calculated in curvilinear coordinates with scaled frequencies. Anharmonicity was included in the lowest-frequency torsion. The position of formation and dissociation of bonds was specified using the variation in harmonic vibrational frequencies along the reaction path. Representative tunnelling energy and the thermally averaged transmission probability at 298 K (P(E)exp?( ? ΔE/RT)) were determined for the reactions in which tunnelling is important. The kinetic isotope effect was used to calculate the considerable contributions of tunnelling and vibration. The expressions for rate constants were determined using nonlinear least-square fitting over the temperature range of 200–2900 K.