Nanosecond and picosecond laser flash photolysis studies of 2,2′-dinitrodiphenylmethanes

The transient absorption spectra of the 2,2′-dinitrodiphenylmethanes 1a–1c in solution were examined in the picosecond and nanosecond time ranges. The absorption bands, observed at 420–450 nm on 355 nm (18 ps) excitation of these compounds, were attributed to the nitronic acids 2a–2c, formed through the singlet-state- mediated intramolecular hydrogen abstraction and the triplet states of 1a–1c. Biradical intermediates, formed through the intramolecular abstraction of the benzylic hydrogen by the triplet excited state, were detected for 1a and 1b. Transient species produced following 355 nm (approximately 6 ns) pulse excitation of 1a–1c result in the formation of the corresponding nitronic acids 2a–2c, with absorption maxima around 415–430 nm. These nitronic acids are the precursors of the various products formed in the steady state irradiation of 1a–1c     

Retention and enantioselective properties of ovomucoid-bonded silica columns Influence of physical properties of base materials and spacer length

The influence of the physical properties of base silica materials and spacer length on chiral separation of enantiomers on ovomucoid (OVM)-bonded materials was investigated. With regard to the pore size of the base silica materials, the 300-Å materials gave higher enantioselectivity, than the 120-Å materials, despite the smaller amounts of bonded OVM proteins. However, higher resolution was obtained with the latter materials. With regard to the spacer length, aminopropyl (AP)-, aminobutyl-, N-(4-aminobutyl)-3-aminopropyl- and N-(6-aminohexyl)-3-aminopropyl-silica gels were activated by N,N′-di-succinimidyl carbonate (DSC) and the proteins were bound. The first two materials showed excellent chiral resolution properties for the solutes tested, and the AP materials gave higher enantioselectivity and resolution. On the other hand, only oxprenolol enantiomers were slightly resolved on the last two materials. Also, AP-silica gels activated by DSC were compared with glycerylpropyl (GP)-silica gels activated by 1,1′-carbonyldiimidazole. The former materials gave higher resolution for acidic and basic solutes despite the lower enantioselectivity, whereas for the unchanged hexobarbital the latter materials gave higher enantioselectivity and almost equal resolution. The above results reveal that the 120-Å base silica gels are more suitable than the 300- Å base silica gels for obtaining larger amounts of bonded OVM proteins and that a less hydrophobic spacer such as an AP group and a hydrophilic spacer such as a GP group are suitable.     

Molecular potential functions from joint analysis of gas electron diffraction and spectroscopic data

A joint analysis of electron diffraction and spectroscopic data is carried out for BF₃, PBr₃, AsBr₃, SbCl₃, SeO₂ and ClO₂ in terms of the harmonic force fields. The scheme of analysis was extended to include the following spectroscopic observables: vibrational frequencies, rotational, Coriolis coupling and centrifugal distortion constants and, whenever available, those for the isotopic species. For ClO₂ a simplified anharmonic analysis was also performed, the anharmonic spectroscopic observables being involved in this case.

Compelling evidence has been presented that the conventional harmonic approximation for the force field in terms of rectilinear internal coordinates yields the simplest satisfactory representation of diffraction and spectroscopic observations. However, a consistently better fit to experimental data was found when natural curvilinear internal coordinates were used. It is shown here that for the systems considered the joint analysis of data from various sources ensures that reliable and accurate values for equilibrium distances and force field parameters are obtained. The optimized values of spectroscopic constants, structural and force field parameters obtained are presented and compared with those available from the literature.     

1,1,2,2-tetrabromodisilane: gas-phase molecular structure and conformational composition as determined by electron diffraction

The molecular structure of 1,1,2,2-tetrabromodisilane has been investigated using gas-phase electron diffraction data obtained at 110°C. At this temperature the molecules exist as a mixture of about equal parts (X = 0.5 ±0.2) of the two conformers with the H---Si---Si---H torsion angle equal to 180° (anti) or 60° (gauche). Assuming that the two conformers differ in their geometries only in the torsion angle φ, some of the important distance (r_a) and angle () parameters are: r(Si---Si) = 2.349(19) Å, r(Si---Br) = 2.205(5) Å, r(Si---H) = 1.485 Å (assumed), Br---Si---Br = 110.1(1.6)°, Si---Si---Br = 107.1(1.2)° Si---Si---H = 108.6° (assumed). The error limits are 2σ. The observed conformational composition (X_anti = 0.5(0.2)) corresponds to an energy difference between the conformers of ΔE = E(gauche) — E(anti) = 0.5 ± 0.6 kcal mol⁻¹, assuming ΔS = Rln2.     

Massenspektrometrische untersuchungen zur elementaranalyse organischer verbindungen—III: Verbrennungsvorgänge im leeren rohr

A measuring system is described which permits study of all stages of combustion processes as functions of carrier gas, temperature, residence time and tube filling. The organic sample is fed at constant speed into a stream of carrier gas. The mixture reaches the combustion chamber within a few milliseconds via a transfer capillary. With the help of a viscous inlet system, a sample of the resulting reaction products is taken and fed into a mass spectrometer. Reaction time and temperature can be adjusted within wide ranges or varied continuously. A plot of the extent of reaction of the various combustion products against temperature at a chosen reaction time yields an oxidation-thermogram which gives a clear picture of the combustion process. It is evident from thermograms of selected compounds that the samples decompose in the presence of oxygen at appreciably lower temperatures than in inert gas. The primary step of the decomposition is “oxidative pyrolysis” which often leads to other products than “inert pyrolysis”. The intermediate products found are partly structurally specific and, especially with nitrogen-containing samples, are numerous and long-lived (for example, carbon monoxide, nitric oxide, cyanogen, hydrocyanic acid, cyanic acid and methyl cyanate). The notorious “difficult combustibility” is largely due to the fact that carbon monoxide, cyanic and hydrocyanic acids undergo complete combustion only at very high temperature. The combustion properties of the “empty tube” can be improved noticeably by a filling of quartz wool and markedly by partly filling with platinum wool.     

Development of a new file search system for nuclear magnetic resonance spectra: Production of an Enlarged Data Base and Search Test

A practical search system for proton n.m.r. spectra is reported. The coding rules and search algorithms are described in detail. Data for 8000 spectra have been converted into a computer-readable file from printed charts. Several search tests are used to evaluate the usefulness of the search system, and various effects of experimental conditions such as different instruments, frequencies and solvents on recall efficiency are described. The results presented indicate that the system should be applicable to routine analytical work.     

XVI. (2,5-C4Bu2RHN)MCl3 (M = Ti, Zr, Hf; R = H, SiMe3)—Azacyclopentadienyl-Komplexe der Gruppe 4-Metalle

The azacyclopentadienyl compounds (2,5-C₄^tBu₂RHN)MCl₃ (M = Ti, Zr, Hf; R = H, SiMe₃) have been prepared as stable solids from the lithiated pyrroles and MCl₄. The π-coordination of the azacyclopentadienyl ligands, as suggested from ¹³ C NMR data, has been confirmed for (2,5-C₄^tBu₂H₂N)TiCl₃ by an X-ray diffraction study.     

Molecular structure of meso-tetraphenylporphyrinatothallium(III) cyanide: Tl(tpp) (CN)

meso-Tetraphenylporphyrinatothallium(III) cyanide, Tl(tpp)(CN), was previously assumed to be monomeric and has been confirmed by X-ray analysis to exist as two independent molecules in one asymmetric unit. This unit displays two square-pyramidal coordination geometries for the thallium atoms with the cyano ligand coordinated to both Tl atoms. It crystallizes in the triclinic space group P , with a 10.003(3), b 16.231(7), c 21.277(8) Å, 89.98(3), β 90.57(3), γ 90.31(3)°' and z = 4. The structure was solved by direct methods. A total of 7995 unique reflections having I > 3σ(I) was measured with an automated diffractometer and used to refine the crystal structure to a conventional R factor of 6.05 %. The thallium-cyanide distances are 2.140(14) Å (for thallium(I)) and 2.277(14) Å (for thallium(2)) respectively, with thallium(1) situated 0.908 Å above the porphyrin ring and thallium(2) located 1.027 Å below the ring. IR and NMR spectroscopy p rovide complementary methods for investigation of the CN ligand. The characteristic band observed at 2160 cm⁻¹ in the FTIR spectrum is assigned to the CN stretching in the Tl(tpp)(CN) complex. The ¹³C resonance of axial cyano ligand is observed with a pulse delay of 3.5 s at 24°C at 139.2 ppm (with ¹J(²⁰⁵Tl-¹³C) 5394 and ¹J(²⁰³Tl-¹³C) 5344 Hz). This observation disagrees with the conclusion, drawn from previous work, in that an exchange process involving the apical ligand explains the invisibility due to line broadening at 35°C of the ¹³C signal.     

Das Reaktionsverhalten von Cp2NbCl2 gegenüber WF6—Struktur von [Cp2NbCl2]4[WF6]2[WCl6]

The oxidation of Cp₂NbCl₂ with pure WF₆ in SO₂ solution yielded the cationic metallocene species [Cp₂NbCl₂]⁺[WF₆]⁻ essentially in quantitative yield. The same reaction carried out in the presence of either equimolar amounts or a two-fold excess of HCN led to the preparation of the new niobocenium salt [Cp₂NbCl₂]₄⁺[WF₆]²⁻ which was studied by single crystal X-ray diffraction. This compound represents the first example of a structurally characterized metallocene-WF₆⁻ complex, and crystallizes in the tetragonal system: space group, P4₁2₁2(No. 92), a = 11.083(8) Å, c = 48.285 (9) Å; Z = 8; R = 0.0759, R_W = 0.0841. ab]Die Oxidation von Cp₂NbCl₂ mit reinem WF₆ führt in SO₂-Lösung zur Synthese von [Cp₂NbCl₂ ]⁺[WF₆]⁻ in nahezu quantitativer Ausbeute. Die analoge Reaktion führt unter Anwesenheit der äquimolaren Menge oder eines zweifachen Überschusses an HCN zur Ausbildung des Niobocenium-Komplexsalzes [Cp₂NbCl₂]₄⁺ [WF₆]₂⁻[WCl₆]²⁻, von dem eine Röntgenstrukturanalyse angefertigt wurde. Diese Verbindung repräsentiert den ersten structurell charakterisierten Vertreter eines Metallocen-WF₆⁻-Komplexes und kristallisiert im tetragonalen System: Raumgruppe P4₁2₁2 (Nr. 92), a = 11.083(8) Å, c = 48.285(9) Å; Z = 8; R = 0.0759, R_W = 0.0841. kw]Niobium; X-ray diffraction; Oxidation; Metallocenes