Improvements of physical and mechanical properties of electron beam irradiation—crosslinked EVA foams

In this work, ethylene–vinyl acetate (EVA) copolymer foams were prepared and crosslinked by using high‐energy electron beam (e‐beam) radiation (10 MeV). The effect of parameters such as irradiation dose, the contents of foaming agent, radiation activator, and radiation sensitizer on improvement of physical and mechanical properties of the EVA foamed samples were investigated. The foams were obtained through a four‐step process of melt mixing, forming, crosslinking, and foaming. During the melt mixing process EVA was compounded with different amounts of azodicarbonamide (ADCA) as a blowing agent, zinc oxide (ZnO) as a radiation activator, and trimethylol propane‐trimethacrylate (TMPTMA) as a radiation sensitizer. The samples were compression molded into flat sheets at low temperature (110°C) and were then radiation‐crosslinked by 20–80 kGy e‐beam. Finally, the crosslinked samples were converted to foams by a high temperature (210°C) compression molding process. The foamed samples were analyzed in terms of gel content, density, compression molding set, tensile properties, and micro‐structural features. It was found that an increase in absorbed radiation dosage increases crosslink density, elasticity, percentage recovery, tensile strength, and compression properties of the EVA foams. Due to the increased recovery the percentage of compression set was reduced. Similarly increasing the TMPTMA content in the formulation increased the crosslink density and the resulting mechanical properties. Contrary to these findings, addition of ADCA led to the formation of extra gases which in turn reduced the crosslink density, and resulted in the deterioration of the mechanical properties and hence an increase in the compression set. However, addition of ZnO and TMPTMA led to the formation of smaller and more uniform cell size with improved mechanical properties. Copyright © 2008 John Wiley & Sons, Ltd.     

Electrocatalytic Reduction of Dioxygen on the Surface of Glassy Carbon Electrodes Modified with Cobalt Porphyrin Complexes

The preparation and electrocatalytic behavior of glassy carbon electrodes modified with three different cobalt porphyrin complexes were investigated. The electrocatalytic ability of the modified electrodes for the reduction of dioxygen to hydrogen peroxide and water in air‐saturated aqueous solutions was examined by cyclic voltammetry and chronoamperometry techniques. The porphyrin‐adsorbed glassy carbon electrodes possess excellent electrocatalytic abilities for dioxygen reduction with overpotential about 0.5 V lower than that at a plain glassy carbon electrode. The experimental parameters were optimized and the mechanism of the catalytic process was discussed. The possible effects of the electron‐donating properties of groups in the meso‐position of the porphyrin ring were investigated.     

The Structures of ZnCl2-Ethanol Mixtures,a Spectroscopic and Quantum Chemical Calculation Study

We report in this article the structural properties, spectral behavior and heterogeneity of ZnCl₂-ethanol (EtOH) mixtures in a wide-composition range (1:3 to 1:14 in molar ratios), using ATR-FTIR spectroscopy and quantum chemical calculations. To improve the resolution of the initial IR spectra, excess spectroscopy and two-dimensional correlation spectroscopy were employed. The transformation process was suggested to be from EtOH trimer and EtOH tetramer to EtOH monomer, EtOH dimer and ZnCl₂-3EtOH complex upon mixing. The theoretical findings showed that increasing the content of EtOH was accompanied with the flow of negative charge to ZnCl₂. This led to reinforcement of the Zn←O coordination bonds, increase of the ionic character of Zn‒Cl bond and weakening and even dissociation of the Zn‒Cl bond. It was found that in some of the ZnCl₂-EtOH complexes optimized at the gas phase or under the solvent effect, there existed hydroxyls with a very special interactive array in the form of Cl‒Zn⁺←O‒H^…Cl⁻, which incredibly red-shifted to wavenumbers <3000 cm⁻¹. This in-depth study shows the physical insights of the respective electrolyte alcoholic solutions, particularly the solvation process of the salt, help to rationalize the reported experimental results, and may shed light on understanding the properties of the deep eutectic solvents formed from ZnCl₂ and an alcohol.     

Hydrothermal-assisted sol–gel synthesis of Cd-doped TiO2 nanophotocatalyst for removal of acid orange from wastewater

Journal of Sol-Gel Science and Technology - This research is based on synthesis of titania (TiO2) nanophotocatalyst followed by cadmium (Cd) doping to activate the photocatalyst in visible part of...     

The effects of cerium doping concentration on the properties and photocatalytic activity of bimetallic Mo/Ce catalyst

In this study, the characterization and photocatalytic activity of MoO₃ nanoparticles doped with various doping concentrations of cerium have been investigated. The Fourier transform infrared (FT-IR) spectra of the prepared catalysts confirmed that MoO₃ particles have been successfully doped by cerium. Field emission scanning electron microscopy (FESEM) was performed to visualize the surface morphology of the obtained catalysts. The XRD patterns suggested that the crystallinity of the sample with the lowest doping concentration of 15 mol % was higher in comparison with samples of higher doping concentrations. The volume-averaged crystal sizes of the obtained catalysts were calculated to be 25, 28, and 32 nm for 15, 35, and 60 mol % samples, respectively. The photocatalytic activity along with the reaction kinetics of Ce-doped MoO₃ nanoparticles have also been investigated through the dye degradation of methyl orange. The synthesized Ce-doped MoO₃ particles with the lowest dopant concentration of 15 mol % exhibited the highest photocatalytic activity for methyl orange dye degradation. It was observed that photo-degradation activity decreased with an increase in the doping concentration of cerium. The predicted rate constants for samples with 15, 35, and 60 mol % doping concentrations were found to be 0.0432, 0.035, and 0.029 min^–1, respectively.     

Synthesis and characterization of poly(methacrylic acid)‐based molecularly imprinted polymer nanoparticles for controlled release of trinitroglycerin

In this study, a novel molecularly imprinted polymer (MIP) based on methacrylic acid (MAA) monomer was synthesized to control release of trinitroglycerin (TNG) as a vasodilator drug for adjusting the cardiac conditions. For this purpose, TNG nanospheres based on poly(methacrylic acid) (PMAA) were prepared by using the precipitation polymerization process. The synthesized TNG nanospheres‐based MIP samples were characterized by means of Fourier transform infrared spectroscopy and field‐emission scanning electron microscopy in order to investigate their provided active functional groups within the cavities as well as morphology, respectively. The results showed that the appropriate non‐covalent bindings between the TNG (template) and PMAA provided within the MIP samples with imprinting factor of 1.98 were achieved by optimizing the amounts of trimethylolpropane trimethacrylate (TRIM) as a cross‐linker and MAA as a functional monomer. On the basis of these obtained conditions, the polymeric nanospheres containing TNG were formed in shape of spherical particles with an average diameter sizing about 40 nm. These remarkable results were obtained by the use of 1:10 molar ratio of TRIM/TNG and 1:6 molar ratio of MAA/TNG. Moreover, in‐vitro release of the TNG from the MIP samples to phosphate buffer solution (pH = 7.4) indicated that the MIP samples had a moderate and gradual release compared with the non‐imprinted polymer samples. These outcomes conducted us to consider the samples as carriers for adjusting potentially cardiac conditions. Copyright © 2016 John Wiley & Sons, Ltd.     

居中热库蛙跳算法的大尺度模拟测试

分子动力学模拟一个必不可少的要素是对运动方程的准确高效积分. 尽管在动力学传播框架内的现代计算工具中大量使用了传统的蛙跳算法,研究表明蛙跳算法仍然可以进一步改进以获得更好的性能. 居中控温方案中蛙跳的改进版本(蛙跳-middle)实现了更高的精度和效率,即使积分时间步长扩大了几倍,也能保持稳定的动力学传播. 本文使用常规和增强采样模拟中对两个积分算法(蛙跳和蛙跳-middle)进行大尺度模拟测试,旨在标定由时间步长引起的全局性质(例如,详细的势能项)的变化行为以及复杂系统的实际模拟中的局部可观察量(例如,自由能变化或键长). 测试集由六个化学和生物相关系统组成,包括$N$-甲基乙酰胺和A₇-T₇DNA中二面角翻转的构象变化、丙二醛内的分子内质子转移、苯和苯酚针对T4溶菌酶L99A的结合自由能计算、乙胺醇低共熔溶剂中的羟基键长变化以及蓝光受体蛋白的势能计算. 所有结果显示蛙跳-middle积分算法中时间步长引起的误差较小. 蛙跳-middle相对传统蛙跳积分算法的性能提高对于全局属性比局部可观测量更大. 总体而言,目前的工作结果表明,在实际化学和生物系统的模拟中,应优先应用蛙跳-middle算法以获得准确的热力学行为和性质.     

Synthesis of poly(2‐hydroxyethyl methacrylate)‐based molecularly imprinted polymer nanoparticles containing timolol maleate: morphological,thermal, and drug release along with cell biocompatibility studies

This work was aimed to synthesize and characterize poly(2‐hydroxyethyl methacrylate) [poly (HEMA)]‐based molecularly imprinted polymer nanoparticles (MIP NPs) containing timolol maleate (TM) via precipitation polymerization. The molecular structures of the MIP and non‐imprinted polymer (NIP) NPs were compared by means of Fourier transform infrared spectroscopy. The morphological observations by using scanning electron microscopy and transmission electron microscopy confirmed the formation of MIP NPs as small as 128 nm in average diameter with appropriate synthesis conditions. Thermal behaviors of the samples were also studied by the use of thermogravimetric analysis and differential scanning calorimetry. By considering a series of key factors such as monomer : template ratio, cross‐linker type, pH, and temperature, the sample with promising characteristics was found to be that of HEMA : TM ratio of 10:1, 40 mmol of ethylene glycol dimethacrylate as cross‐linker, and polymerization temperature of 60°C in acetonitrile as porogenic solvent. Furthermore, the ultraviolet‐visible (UV‐vis) spectrophotometry results proved a controlled release of TM from the MIP NP samples compared with NIP ones at extended periods. Moreover, the cytotoxicity of the MIP and NIP NPs samples was evaluated on mesenchymal stem cells, and the obtained observations showed that they had no adverse side effect on the living cells; especially the surface of the MIP NPs sample depicted highly cell's biocompatibility. Finally, the outcomes from designed different experiments conducted us that the HEMA‐based MIP NPs have great potential as an ocular nanocarrier for TM delivery. Copyright © 2016 John Wiley & Sons, Ltd.