Sodiation as a tool for enhancing the diagnostic value of MALDI‐TOF/TOF‐MS spectra of complex astaxanthin ester mixtures from Haematococcus pluvialis

The microalga Haematococcus pluvialis produces the pigment astaxanthin mainly in esterified form with a multitude of fatty acids, which results in a complex mixture of carotenol mono‐ and diesters. For rapid fingerprinting of these esters, matrix‐assisted laser desorption ionization time of flight mass spectrometry (MALDI‐TOF/TOF‐MS) might be an alternative to traditional chromatographic separation combined with MS. Investigation of ionization and fragmentation of astaxanthin mono‐ and diester palmitate standards in MALDI‐TOF/TOF‐MS showed that sodium adduct parent masses [M + Na]⁺ gave much simpler MS² spectra than radical / protonated [M]^+● / [M + H]⁺ parents. [M + Na]⁺ fragments yielded diagnostic polyene‐specific eliminations and fatty acid neutral losses, whereas [M]^+● / [M + H]⁺ fragmentation resulted in a multitude of non‐diagnostic daughters. For diesters, a benzonium fragment, formed by polyene elimination, was required for identification of the second fatty acid attached to the astaxanthin backbone. Parents were forced into [M + Na]⁺ ionization by addition of sodium acetate, and best signal‐to‐noise ratios were obtained in the 0.1 to 1.0 mM range. This method was applied to fingerprinting astaxanthin esters in a crude H. pluvialis extract. Prior to MALDI‐TOF/TOF‐MS, the extract was fractionated by normal phase Flash chromatography to obtain fractions enriched in mono‐ and diesters and to remove pheophytin a, which compromised monoester signals. All 12 types of all‐trans esterified esters found in LC were identified with MALDI‐TOF/TOF‐MS, with the exception of two minor monoesters. Copyright © 2013 John Wiley & Sons, Ltd.     

The obtaining of NiCr2O4 nanoparticles by unconventional synthesis methods

This paper presents a study regarding the obtaining of NiCr₂O₄ by two new unconventional synthesis methods: (i) the first method is based on the formation of Cr(III) and Ni(II) carboxylate-type precursors in the redox reaction between the nitrate ion and 1,3-propanediol. The thermal decomposition of these complex combinations, at ~300 °C, leads to an oxide mixture of Cr₂O_3+x and NiO, with advanced homogeneity, small particles and high reactivity. On heating this mixture at 500 °C, Cr₂O₃ reacts with NiO to form NiCr₂O₄, which was evidenced by FT-IR and X-ray diffractometry (XRD) analysis; (ii) the second method starts from a mechanical mixture of (NH₄)₂Cr₂O₇ and Ni(NO₃)₂·6H₂O. On heating this mixture, a violent decomposition at 240 °C with formation of an oxides mixture (Cr₂O₃ + CrO₃) and NiO takes place. On thermal treatment up to 500 °C, an intermediary phase NiCrO₄ is formed, which by decomposition at ~700 °C leads to NiCr₂O₄, evidenced by FT-IR and XRD analysis. NiCr₂O₄ is formed, in both cases, starting with a temperature higher than 400 °C, when the non-stoichiometric chromium oxide (Cr₂O_3+x ) loses the oxygen excess and turns to stoichiometric chromium oxide (Cr₂O₃), which further reacts with NiO.     

CoFe2O4/SiO2 nanocomposites by thermal decomposition of some complex combinations embedded in hybrid silica gels

The study reports the preparation of CoFe₂O₄/SiO₂ nanocomposites by a new modified sol–gel method starting from cobalt nitrate, iron nitrate, and diols: 1,2-ethanediol (EG), 1,3-propanediol (1,3PG), and tetraethylorthosilicate (TEOS), for final compositions of 30 %CoFe₂O₄/70 %SiO₂ and 50 %CoFe₂O₄/50 %SiO₂. The method is based on the formation of a Co(II), Fe(III)—carboxylate precursors mixture, during the redox reaction between the NO ₃ ^? ion and the diol (~140 °C) within the silica gels. The thermal decomposition of these complex combinations takes place at ~300 °C leading to the corresponding amorphous metal oxides within the pores of the hybrid gels. Depending on the subsequent thermal treatment, CoFe₂O₄ can be obtained as single phase or in a mixture with Co₂SiO₄. The CoFe₂O₄ crystallites sizes are in the nanometer range (3–10 nm). The obtained nanocomposites have a hard magnet behavior, as a result of the high anisotropy of CoFe₂O₄ having large hysteresis cycles.     

Self‐Assembled PAA‐Based Nanoparticles as Potential Gene and Protein Delivery Systems

A series of nanoparticles is prepared via layer‐by‐layer assembly of oppositely charged, synthetic biocompatible polyamidoamine polymers as potential carriers. Particle size, surface charge and internal chain mobility are quantified as a function of the polymer type and number of layers. The effect of addition of surfactant is examined to simulate the effects of nanoparticle dissolution. The cyctotoxicity of these particles (in epithelia and murine cell lines) are orders of magnitude lower than polyethyleneimine controls. Stable nanoparticles may be prepared from mixtures of strongly, oppositely charged polymers, but less successfully from weakly charged polymers, and, given their acceptable toxicity characteristics, such modularly designed constructs show promise for drug and gene delivery.

     

Widespread occurrence of polyhalogenated compounds in fat from kitchen hoods

Food and contaminated indoor environments are the most relevant sources of human exposure to polyhalogenated chemicals. This study analyzed for the first time fat residues in kitchen hoods for contaminations with polyhalogenated compounds. A wide range of contaminants was detected in all kitchen hoods (n?=?15) and most of them could be quantified. Between 0.2 and 18 μg polyhalogenated chemicals/g fat were detected, with chlorinated paraffins being the most relevant contaminant group. Aside from the chlorinated paraffins, each kitchen hood fat sample showed a distinct fingerprint. A wide range of old and current-use brominated flame retardants were also detected in the samples. In addition to these contaminants originating from their use in indoor equipment, residues of organochlorine pesticides and semi-volatile halogenated natural products verified that cooking of food, accompanied with the release of contaminants from the heated food, was another relevant source of contamination. Re-analyses of two samples after 3 months only resulted in small variations in contaminant pattern and concentrations. Therefore, fat from kitchen hoods is proposed as an easily accessible matrix to assess contamination of these hazardous polyhalogenated chemicals.

Mediated glucose enzyme electrodes by cross-linking films of osmium redox complexes and glucose oxidase on electrodes

Here, we report on a novel, versatile approach for the preparation of mediated enzyme electrodes, demonstrated using cross-linked films of glucose oxidase and a range of functionalised osmium complexes on graphite electrodes. Response of enzyme electrodes are optimised by evaluation of glucose response as a function of variation in ratios of [Os(2,2′-bipyridine)₂(4-aminomethyl pyridine)Cl]⁺ redox mediator, polyallylamine support and glucose oxidase enzyme cross-linked using a di-epoxide reagent in films on graphite. Lowering of the redox potential required to mediate glucose oxidation is achieved by synthesis of complexes using (4,4′-dimethyl-2,2′-bipyridine) or (4,4′-dimethoxy-2,2′-bipyridine) as a ligand instead of (2,2′-bipyridine). Enzyme electrodes prepared using the complexes based on dimethoxy- or dimethyl-substituted bipyridines provide glucose oxidation current densities of 30 and 70 μA?cm^?2 at 0.2 and 0.35 V applied potential compared to 120 μA?cm^?2 at 0.45 V for the initial enzyme electrode, under pseudo-physiological conditions in 5 mM glucose, with stability of signals proving inadequate for long-term operation. Current output and stability may be improved by selection of alternate anchoring and cross-linking methodology, to provide enzyme electrodes capable for application to long-term glucose biosensors and anodes in enzymatic fuel cells.

Microengineered PEG Hydrogels: 3D Scaffolds for Guided Cell Growth

Designing three‐dimensional (3D) scaffolds for selective manipulation of cell growth is of high relevance for applications in regenerative medicine. Especially, scaffolds with oriented morphologies bear high potential to guide the restoration of specific tissues. The fabrication of hydrogel scaffolds that support long‐term survival, proliferation, and unidirectional growth of embedded cells is presented here. Parallel channel structures are introduced into the bulk hydrogels by uniaxial freezing, providing stable, and uniform porosity suitable for cell invasion (pore diameters of 5–15 µm). In vitro assessment of the scaffolds with murine fibroblasts (NIH L929) shows a remarkable unidirectional movement along the channels, with the cells traveling several millimeters through the hydrogel.

     

Electrochemical Characteristics of Discrete,Uniform, and Monodispersed Hollow Mesoporous Carbon Spheres in Double‐Layered Supercapacitors

Core–shell‐structured mesoporous silica spheres were prepared by using n‐octadecyltrimethoxysilane (C18TMS) as the surfactant. Hollow mesoporous carbon spheres with controllable diameters were fabricated from core–shell‐structured mesoporous silica sphere templates by chemical vapor deposition (CVD). By controlling the thickness of the silica shell, hollow carbon spheres (HCSs) with different diameters can be obtained. The use of ethylene as the carbon precursor in the CVD process produces the materials in a single step without the need to remove the surfactant. The mechanism of formation and the role played by the surfactant, C18TMS, are investigated. The materials have large potential in double‐layer supercapacitors, and their electrochemical properties were determined. HCSs with thicker mesoporous shells possess a larger surface area, which in turn increases their electrochemical capacitance. The samples prepared at a lower temperature also exhibit increased capacitance as a result of the Brunauer–Emmett–Teller (BET) area and larger pore size.     

Copper(II) Complexes of 3,4,5‐Trisubstituted Pyrazolates: In Situ Formation of Pyrazole Rings from Different Carbon Centers

The synthesis and characterization of two pyrazolate‐bridged dicopper(II) complexes, [Cu₂(L¹)₂(H₂O)₂](ClO₄)₂ ( 1 , HL¹=3,5‐dipyridyl‐4‐(2‐keto‐pyridyl)pyrazole) and [Cu₂(L²)₂(H₂O)₂](ClO₄)₂ ( 2 , HL²=3,5‐dipyridyl‐4‐benzoylpyrazole), are discussed. These copper(II) complexes are formed from the reactions between pyridine‐2‐aldehyde, 2‐acetylpyridine (for compound 1 ) or acetophenone (for compound 2 ), and hydrazine hydrate with copper(II) perchlorate hydrate under ambient conditions. The single‐crystal X‐ray structure of compound 1? 2 H₂O establishes the formation of a pyrazole ring from three different carbon centers through C? C bond‐forming reactions, mediated by copper(II) ions. The free pyrazoles (HL¹ and HL²) are isolated from their corresponding copper(II) complexes and are characterized by using various analytical and spectroscopic techniques. A mechanism for the pyrazole‐ring synthesis that proceeds through C? C bond‐forming reactions is proposed and supported by theoretical calculations.