1-Azathioxanthone Appended Lanthanide(III) DO3A Complexes That Luminesce Following Excitation at 405 nm**

Since the pioneering report by Selvin, we have been fascinated by the potential of using lanthanide luminescence in bioimaging. The uniquely narrow emission lines and long luminescence lifetimes both provide the potential for background free images together with full certainty of probe localization. General use of lanthanide based bioimaging was first challenged by low brightness, and later by the need of UV (<405 nm) excitation sources not present in commercial microscopes. Here, we designed three lanthanide-based imaging probes based on a known motif to investigate the limitations of 405 nm excitation. These were synthesized, characterized, investigated on dedicated as well as commercial microscopes, and the photophysics was explored in detail. It was proven without doubt that the lanthanide complexes enter the cells and luminesce internally. Even so, no lanthanide luminescence were recovered on the commercial microscopes. Thus, we returned to the photophysical properties that afforded the conclusion that – despite the advances in light sources and photodetectors – we need new designs that can give us brighter lanthanide complexes before bioimaging with lanthanide luminescence becomes something that is readily done.     

The Neovessel Occlusion Efficacy of 151-Hydroxypurpurin-7-Lactone Dimethyl Ester Induced with Photodynamic Therapy

In this study, the photodynamic therapy (PDT) induced efficacy of a semi-synthesized analogue 15¹-hydroxypurpurin-7-lactone dimethyl ester or G2, in terms of chick chorioallantoic membrane blood vessel occlusion was evaluated in reference to verteporfin. Early formulation studies showed that G2 prepared in a system of cremophor EL 2.5% and ethanol 2.5% in saline was biocompatible up to 20 μL volume of injection. Following injection, G2 accumulation peaked within the first minute and its extravasation from intra- to extra-vascular occurred somewhat slower as compared with verteporfin. In the PDT study, closure of capillaries and small neovessels was observed with 4 μg per embryo of G2 and a light dose of 20 J cm⁻² at a fluence rate of 40 mW cm⁻² filtered at 400–440 nm—a result that may be considered optimum for the treatment of age-related macular degeneration (AMD). Also, partial occlusion of the large vessels was observed using the same dose of G2 and light—an effect which is desirable for cancer treatment. From this study, we conclude that G2 has the potential to be developed as a therapeutic agent for photodynamic treatment for AMD and cancer.     

Electrochemical behaviour of denatured haemoglobin at the liquid|liquid interface

We report here the influence of chemical denaturation of haemoglobin on its electrochemical behaviour at the polarised liquid|liquid interface. Denaturation with urea resulted in a modification of the haemoglobin electrochemical behaviour, with the disappearance of the forward transfer peak and a decrease of the reverse peak current. Although the reverse peak current increased linearly with the concentration of denatured haemoglobin in the aqueous phase, the slope of the current-concentration plot was three-times lower than that for native haemoglobin over the 0.1–1 μM concentration range. These results indicate the sensitivity of electrochemistry at liquid|liquid interfaces to protein tertiary structure.     

Tyrosine nitration affects thymidylate synthase properties

Highly purified preparations of thymidylate synthase, isolated from calf thymus, and L1210 parental and FdUrd-resistant cells, were found to be nitrated, as indicated by a specific reaction with anti-nitro-tyrosine antibodies, suggesting this modification to appear endogenously in normal and tumor tissues. Each human, mouse and Ceanorhabditis elegans recombinant TS preparation, incubated in vitro in the presence of NaHCO(3), NaNO(2) and H(2)O(2) at pH 7.5, underwent tyrosine nitration, leading to a V(max)(app) 2-fold lower following nitration of 1 (with human or C. elegans TS) or 2 (with mouse TS) tyrosine residues per monomer. Enzyme interactions with dUMP, meTHF or 5-fluoro-dUMP were not distinctly influenced. Nitration under the same conditions of model tripeptides of a general formula H(2)N-Gly-X-Gly-COOH (X = Phe, Tyr, Trp, Lys, Arg, His, Ser, Thr, Cys, Gly), monitored by NMR spectroscopy, showed formation of nitro-species only for H-Gly-Tyr-Gly-OH and H-Gly-Phe-Gly-OH peptides, the chemical shifts for nitrated H-Gly-Tyr-Gly-OH peptide being in a very good agreement with the strongest peak found in (15)N-(1)H HMBC spectrum of nitrated protein. MS analysis of nitrated human and C. elegans proteins revealed several thymidylate synthase-derived peptides containing nitro-tyrosine (at positions 33, 65, 135, 213, 230, 258 and 301 in the human enzyme) and oxidized cysteine (human protein Cys(210), with catalytically critical Cys(195) remaining apparently unmodified) residues.     

Structural investigation of Langmuir and Langmuir-Blodgett monolayers of semifluorinated alkanes

The behavior of a semi-fluorinated alkane (C(10)F(21)C(19)H(39)) has been studied at the air-water interface by using surface pressure and surface potential-area isotherms as well as infrared spectroscopy for the Langmuir-Blodgett films. In addition, based on the quantum chemical PM3 semiempirical approach, the dimer structure was investigated, and the double helix was found to be the most stable conformation of the dimer. The obtained results allow us to imply that the phase transition observed in the course of the surface pressure/area isotherm is due to a conformational change originating from the double helix to a vertical, single helix configuration.     

Exciplex Emission from a Boron Dipyrromethene (Bodipy) Dye Equipped with a Dicyanovinyl Appendage

The photophysical properties of a prototypic donor–acceptor dyad, featuring a conventional boron dipyrromethene (Bodipy) dye linked to a dicyanovinyl unit through a meso‐phenylene ring, have been recorded in weakly polar solvents. The absorption spectrum remains unperturbed relative to that of the parent Bodipy dye but the fluorescence is extensively quenched. At room temperature, the emission spectrum comprises roughly equal contributions from the regular π, π* excited‐singlet state and from an exciplex formed by partial charge transfer from Bodipy to the dicyanovinyl residue. This mixture moves progressively in favor of the locally excited π, π* state on cooling and the exciplex is no longer seen in frozen media; the overall emission quantum yield changes dramatically near the freezing point of the solvent. The exciplex, which has a lifetime of approximately 1 ns at room temperature, can also be seen by transient absorption spectroscopy, in which it decays to form the locally excited triplet state. Under applied pressure (P<170 MPa), formation of the exciplex is somewhat hindered by restricted rotation around the semirigid linkage and again the emission profile shifts in favor of the π, π* excited state. At higher pressure (170<P<550 MPa), the molecule undergoes reversible distortion that has a small effect on the yield of π, π* emission but severely quenches exciplex fluorescence. In the limiting case, this high‐pressure effect decreases the molar volume of the solute by approximately 25 cm³ and opens a new channel for nonradiative deactivation of the excited‐state manifold.     

Electrorheology of aniline oligomers

Aniline oligomers were prepared by the oxidation of aniline with p-benzoquinone in aqueous solutions of methanesulfonic acid (MSA) of various concentrations. Their molecular structures were assessed by Fourier transform infrared spectroscopy. The electrorheological (ER) behavior of their silicone oil suspensions under applied electric field has been investigated. Shear stress at a low shear rate, τ _0.9, was used as a criterion of the rigidity of internal structures created by the application of an electric field. It was established from the fitting of the dielectric spectra of the suspensions with the Havriliak–Negami model that dielectric relaxation strength, as a degree of polarization induced by an external field contributing to the enhanced ER effect, increases and relaxation time, i.e., the response of the particle to the application of the field, decreases when a higher molar concentration of MSA is used. The best values were observed for suspensions of the sample prepared in the presence of 0.5 M of MSA. This suspension creates stiff internal structures under an applied electric field strength of 2 kV mm^?1 with τ _0.9 of nearly 50 Pa, which is even slightly of higher value than that obtained for standard polyaniline base ER suspension measured at the same conditions. The concentration of the MSA used in the preparation of oligomers seems to be a crucial factor influencing the conductivity, dielectric properties and, consequently, rheological behavior, and finally ER activity of their suspensions.     

Performance of selective and partially selective sensors in the recognition of beverages

A sensor array composed of selective and partially selective electrodes is applied to the recognition of beverages: milk, orange juice, and beer. The role of selective and partially selective sensors in classification results is discussed. For this reason two experiments are realized: distinguishing among various types of foodstuffs and the recognition of their origin (manufacturer). In both cases, the measurements were performed in stationary and flow mode. Classical ion-selective electrodes and miniaturized solid-state electrodes were considered.The best results are obtained when the two types of sensor are incorporated in the array, which leads to the highest correctness of the system response. It is however worth to notice, that in the case of some samples (for example, milk) satisfactory results were obtained when only selective or when only partially selective electrodes were applied.     

The preparation of conducting polyaniline�Csilver and poly(p-phenylenediamine)�Csilver nanocomposites in liquid and frozen reaction mixtures

The oxidation of aniline with silver nitrate in 1?mol?L^?1 acetic acid at 20?°C yielded a composite of two conducting components, polyaniline and silver; the acceleration with 1?mol% of p-phenylenediamine is needed for efficient synthesis. The yield and molecular weight increased when aniline was copolymerized with 10?mol% p-phenylenediamine. Such product displayed metallic conductivity below 180?K and semiconductor type above this temperature. As the result, the conductivity was the same at 100 and 300?K. The oxidation of p-phenylenediamine alone with silver nitrate also produced a conducting composite having the conductivity of 1,750?S cm^?1 despite the assumed nonconductivity of poly(p-phenylenediamine). The present study demonstrates that all oxidations proceeded also in frozen reaction mixtures at ?24?°C, i.e., in the solid state. In most cases, molecular weights of polymer component increased, the conductivity of composites with silver improved, to 2,990?S?cm^?1 for poly(p-phenylenediamine)?Csilver, and remained high after deprotonation with 1?mol?L^?1 ammonium hydroxide.     

Highly effective synthesis of vinylfunctionalised cubic silsesquioxanes

A series of functionalised cubic monovinylheptaisobutylsilsesquioxanes and octavinylsilsesquioxanes were obtained via efficient and highly stereoselective cross-metathesis and silylative coupling with substituted styrenes.