基于任意形状颗粒集合二值图像的体积估算模型

基于任意形状颗粒集合的二值图像,提出了估计其体积(或质量)的方法.首先利用发光背景台面获取的颗粒灰度图像变换为相应的二值图像,得到颗粒的边界轮廓.然后再基于其边界信息,定义与颗粒形状特征相关的描述量,并将其无量纲化.将由此定义的无量纲参变量作为回归变量建立一个多元线性回归(multiple linear regression)模型用以估计颗粒集合的扁平度,进而估算颗粒体积.回归变量的系数由随机采样的501个样本颗粒(尺寸范围为4.75～25 mm)用误差最小平方和求得.将模型应用于由具有相似统计分布特征的其他颗粒集合,并将得到的体积估计值与其体积真实值相比较,实验结果显示模型的相对误差在±2%以内.     

随机删失场合半参数回归模型参数估计的重对数律‘

本文探讨了随机删失场合半参数回归模型的参数估计问题.考虑半参数回归模型Y =X}}3 + g(T)十。，其中(X,T)’为取值于Kp X [0,1〕上的随机向量，月为1'维未知参数向量，8为定义于【0.1]上的未知函数，。为随机误差，Ee = 0 . Eez = az }。未知，且(X ,T)与。独立，).被一个与之独立的随机变量V所截.此时仅能观察到:Z=min(Y,V),o=1(Y簇V)，参数I3,az的估计量禽及公 z可综合非参数的权函数估计法与参数的最小二乘估计方法得到.本文对核函数的情形得到了念及ar z的精确收敛速度即重对数律.     

用交流示波极谱测定难溶盐的溶度积

应用交流示波极谱测定了三种难溶银盐的溶度积,结果与用离子选择性电极测得的文献值相似,显示了交流示波极谱用作溶液中微观粒子的探测工具的可能性。     

纯锆上离子注入钇和镧后的表面分析

用金属蒸汽真空弧源，以40kV加速电压对纯锆样品分别进行了10¹⁶—10¹⁷/cm²的钇、镧离子注入，注入温度约为130℃.然后对注入样品进行表面分析.x射线光电子能谱分析表明，注入的钇以Y₂O₃形式存在，镧以La₂O₃形式存在.俄歇电子能谱表明，纯锆基体表面的氧化膜厚度随着离子注入剂量的增加而增加，当离子注入剂量达到10¹⁷/cm²时，氧化膜的厚度达到了最大值.卢瑟福背散射显示镧层的厚度约为30nm，同时直接观察到当离子注入剂量为(La+Y)10¹⁷/cm²时，纯锆样品表面发生了严重的溅射. 关键词： 纯锆 钇和镧离子共注入 卢瑟福背散射 x射线光电子能谱     

Cluster and periodic DFT calculations of adsorption and activation of CO2 on the Cu(hkl) surfaces

The adsorption behavior and thermal activation of carbon dioxide on the Cu(1 1 1), Cu(1 0 0), and Cu(1 1 0) surfaces have been investigated by means of density functional theory calculations and cluster models and periodic slabs. According to the cluster models, the optimized results indicate that the basis set of C and O atoms has a distinct effect on the adsorption energy, but an indistinct one on the equilibrium geometry. For the CO₂/Cu(hkl) adsorption systems studied here, the final structure of adsorbed CO₂ is near linear and the preferred modes for the adsorption of CO₂ onto the Cu(1 1 1), Cu(1 0 0), and Cu(1 1 0) surfaces are the side-on adsorption at the cross bridge site with an adsorption energy of 13.06 kJ/mol, the side-on adsorption at the short bridge site (13.54 kJ/mol), and the end-on adsorption on the on-top site with C–O bonds located along the short bridge site (26.01 kJ/mol), respectively. However, the calculated adsorption energies from periodic slabs are lower as compared to the experimental data as well as the cluster model data, indicating that the periodic slab approach of generalized gradient approximation in the density function theory may be not suitable to obtain quantitative information on the interaction of CO₂ with Cu(hkl) surfaces.     

二氯和邻菲罗啉二酮的镍(Ⅱ)、铜(Ⅱ)、锌(Ⅱ)配合物的合成与表征

以ＭＣｌ２和配体Ｌ（Ｌ＝１，１０－菲罗啉－５，６－二酮）为原料，合成了标题配合物ＭＬＣｌ２，Ｍ＝ＮｉⅡ，ＣｕⅡ，ＺｎⅡ，并经元素分析、热谱、ＩＲ和摩尔电导表征．三者均为四配位的电中性配合物，热稳定性高于５００Ｋ，易溶于ＤＭＦ、ＤＭＳＯ和吡啶，可溶于乙腈和水．它们在ＤＭＦ中于３５０ｎｍ和３１５ｎｍ附近显示出强的Ｍ－Ｌ荷移跃迁     

Magnetic properties of nickel-zinc ferrites synthesized from liquid solutions produced in chemical and electrochemical processing of metals

Nickel-zinc ferrite was prepared by coprecipitation from liquid waste formed in chemical and electrochemical processing of metals.     

Rational Homotopy Theory and Nonnegative Curvature

in this note, we answer positively a question by Belegradek and Kapovitch about the relation between rational homotopy theory and a problem in Riemannian geometry which asks that total spaces of which vector bundles over compact non-negative curved manifolds admit （complete） metrics with non-negative curvature.     

关于非球面制造技术的看法

列举了现代诸高科技领域对非球面光学系统的需求实例，如短波光学，空间光学，红外光学，微电子技术等。然后比较讨论了刀口阴影法与数字干涉检验的优缺点。在非球面修磨方法方面，首先肯定了计算机辅助加工是发展的方向，指出其主要优点在于“失误”造成的反复率大大降低。最后对非球面技术提出了总的看法，并对检测方法和修磨方法提出了几个研究课题。     

无机螺旋体超分子配合物的组装、应用和结构转化研究进展

简述了近年来报道的具有新颖结构和性能的无机螺旋体超分子配合物的组装、应用和结构转化方面的最新进展,并展望了无机螺旋体的发展前景及其开发应用潜力。