Photocatalytic removal of tetracycline by a Z-scheme heterojunction of bismuth oxyiodide/exfoliated g-C3N4: performance,mechanism, and degradation pathway

Antibiotics, once being released into the environment, become recalcitrant organic pollutants, which pose a potential risk to ecological balance and human health. In this study, a Z-scheme heterojunction of bismuth oxyiodide (BiOI)/exfoliated g-C₃N₄ (BiOI/ECN hereafter) was synthesized by the combination of thermal exfoliation of g-C₃N₄ and chemical precipitation of BiOI for efficient photocatalytic degradation of tetracycline in aqueous solutions under visible light irradiation. The optimized BiOI/ECN delivered an outstanding degradation rate at circa 0.0705 min^?1, which was 10 times higher than that of the bulk g-C₃N₄. The photocatalytic degradation efficiency of tetracycline remained almost unchanged in a pH range of 3–11, and the BiOI/ECN displayed an excellent photostability upon recycled usage. The photocatalytic mechanism of tetracycline was ascribed to the main reactive oxidation species of photogenerated holes and superoxide radicals. In addition, the possible degradation pathways of tetracycline were investigated by HPLC-MS to identify intermediates. The toxicity of photocatalytic-generated intermediates of tetracycline was found significantly alleviated according to the calculation of quantitative structure–activity relationship prediction. This work not only provides an attractive photocatalyst for the removal of tetracycline but also opens a new avenue for rational design of Z-scheme heterojunction composites for tetracycline degradation.     

Simultaneous photocatalytic oxidation and adsorption for efficient As(III) removal by magnetic BiOI/γ-Fe2O3 core–shell nanoparticles

Addressing arsenite pollution in groundwater has drawn great attention. It is attractive to pre-oxidize highly mobile As(III) to relatively low-toxic As(V) with a subsequent adsorption separation process. Herein, BiOI anchoring on γ-Fe₂O₃ is performed to synthesize BiOI/γ-Fe₂O₃ core–shell nanoparticles for efficient removal of As(III) via a simultaneous photocatalytic oxidization–adsorption process. The physical and chemical structures of BiOI/γ-Fe₂O₃ are investigated by transmission electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction measurements. The photoluminescence and electron spin resonance (ESR) characterization were employed to ascertain the possible reaction mechanism of visible-light-driven photocatalytic oxidation of As(III). Such BiOI/γ-Fe₂O₃ delivers a superior As(III) removal capability under visible light irradiation with an arsenic removal efficiency of 99.8% within 180 min, higher than those of BiOCl/γ-Fe₂O₃ (81.7%) and BiOBr/γ-Fe₂O₃ (98.9%). The optimal BiOI/γ-Fe₂O₃ (molar ratio of 2:1) is obtained by rationally adjusting the molar ratio of BiOI to γ-Fe₂O₃. The as-synthesized BiOI/γ-Fe₂O₃ performs well in a wide pH range of 2–8. Only coexisting PO₄^3? anions have a significant effect on the As(III) removal. The free radical trapping experiment and ESR results demonstrate that the ?O₂^? and h⁺ are the main active substances for the photocatalytic oxidation of As(III) on BiOI/γ-Fe₂O₃. This work not only gives a novel magnetic core–shell nanoparticle photocatalyst for efficient photocatalytic oxidation and adsorption of As(III) but also offers a new strategy to rationally design BiOX for its related practical applications.     

Control of pore environment in highly porous carbon materials for C2H6/C2H4 separation with exceptional ethane uptake

Adsorptive separation of C₂H₆ from C₂H₄ by adsorbents is an energy-efficient and promising method to boost the polymer grades C₂H₄ production. However, that C₂H₆ and C₂H₄ display very similar physical properties, making their separation extremely challenging. In this work, by regulating the pore environment in a family of chitosan-based carbon materials (C-CTS-1, C-CTS-2, C-CTS-4, and C-CTS-6)- we target ultrahigh C₂H₆ uptake and C₂H₆/C₂H₄ separation, which exceeds most benchmark carbon materials. Explicitly, the C₂H₆ uptake of C-CTS-2 (166 cm³/g at 100 kPa and 298 K) has the second-highest adsorption capacity among all the porous materials. In addition, C-CTS-2 gives C₂H₆/C₂H₄ selectivity of 1.75 toward a 1:15 mixture of C₂H₆/C₂H₄. Notably, the adsorption enthalpies for C₂H₆ in C-CTS-2 are low (21.3 kJ/mol), which will facilitate regeneration in mild conditions. Furthermore, C₂H₆/C₂H₄ separation performance was confirmed by binary breakthrough experiments. Under different ethane/ethylene ratios, C-CTS-X extracts a low ethane concentration from an ethane/ethylene mixture and produces high-purity C₂H₄ in one step. Spectroscopic measurement and diffraction analysis provide critical insight into the adsorption/separation mechanism. The nitrogen functional groups on the surface play a vital role in improving C₂H₆/C₂H₄ selectivity, and the adsorption capacities depend on the pore size and micropore volume. Moreover, these robust porous materials exhibit outstanding stability (up to 800 °C) and can be easily prepared on a large scale (kg) at a low cost (～$26 per kg), which is very significant for potential industrial applications.     

Surface Functionalization of PEO Nanofibers Using a TiO2 Suspension as Sheath Fluid in a Modified Coaxial Electrospinning Process

Convenient and integration fabrication process is a key issue for the application of functional nanofibers. A surface functionalization method was developed based on coaxial electrospinning to produce ultraviolet(UV) protection nanofibers. The titanium dioxide(TiO₂) nanoparticles suspension was delivered through the shell channel of the coaxial spinneret, by which the aggregation of TiO₂ nanoparticles was overcome and the distribution uniformity on the surface of polyethylene oxide(PEO) nanofiber was obtained. With the content of TiO₂ increasing from 0 to 3%(mass fraction), the average diameter of nanofibers increased from (380±30) nm to (480±100) nm. The surface functionalization can be realized during the electrospinning process to gain PEO/TiO₂ composite nanofibers directly. The uniform distribution of TiO₂ nanoparticles on the surface of nanofibers enhanced the UV absorption and resistance performance. The maximum UV protection factor(UPF) value of composite nanofibers reaches 2751. This work presented a novel surface-functionalized way for the preparation of composite nanofiber, which has great application potential in the field of micro/nano system integration fabrication.     

基于光导微探针的近场/远场可扫描太赫兹光谱技术

太赫兹技术已经成为涉及公共安全、军事国防和国民经济等国家核心利益的前沿研究领域.以往太赫兹测量技术中通常以远场测量为主,如常用的太赫兹时域光谱仪.近年来太赫兹近场技术得到了迅猛的发展,特别是基于光导天线的探针技术的发展,为可扫描的太赫兹近场测量提供了可能.本文详细报道了我们近期在可扫描太赫兹近场光谱仪研究中的进展.采用光纤耦合的光导微探针实现了方便灵活的太赫兹近场/远场三维扫描,并同时获得振幅和相位信息.该系统将有可能广泛应用于人工微结构、石墨烯、表面等离子激元、波导传输、近场成像、生物样品检测、芯片检测等研究领域.     

Quantitative analysis of asymmetrical cortical activity in motor areas during sequential finger movement

Brain asymmetry is a phenomenon well known for handedness and has been studied in motor cortices. However, few quantitative studies on asymmetrical cortical activity in motor areas have been conducted. In this study, we systematically investigated asymmetrical cortical activity in motor areas during sequential finger movement by quantitatively analyzing functional magnetic resonance imaging (fMRI) blood oxygenation level-dependent (BOLD) responses. The norm of BOLD signal percentage of change was introduced to quantitatively measure the BOLD signal intensity change difference between the left and right motor areas. The results of the data collected from six subjects show that the norm of BOLD signal percentage of change in the right motor area is higher than that in the left motor area for two-hand movement (P=.0059) and single-hand movement (P=.0279) with right-handedness. These results from fMRI show the asymmetry of motor areas and may suggest that the left hemisphere motor area comes into being as an adaptation system that needs few neuron cells only to finish any movement task for right-handedness. The activation intensity in the left motor area is reduced with normal right finger movement. The activation intensity in the right motor area is obviously higher than that in the left motor area.     

Comparative study of Co3O4-ZSM-5 catalysts synthesized by different hydrothermal methods for the catalytic oxidation of dichloromethane

In this work, various Co₃O₄-ZSM-5 catalysts were prepared by the microwave hydrothermal method (MH-Co₃O₄@ZSM-5), dynamic hydrothermal method (DH-Co₃O₄@ZSM-5), and conventional hydrothermal method (CH-Co₃O₄/ZSM-5). Their catalytic oxidation of dichloromethane (DCM) was analyzed. Detailed characterizations such as X-ray diffractometer (XRD), scanning microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET), H₂ temperature-programmed reduction (H₂-TPR), temperature-programmed desorption of O₂ (O₂-TPD), temperature-programmed desorption of NH₃ (NH₃-TPD), diffuse reflectance infrared Fourier-transform spectra with NH₃ molecules (NH₃-DRIFT), and temperature-programmed surface reaction (TPSR) were performed. Results showed that with the assistance of microwave, MH-Co₃O₄@ZSM-5 formed a uniform core-shell structure, while the other two samples did not. MH-Co₃O₄@ZSM-5 possessed rich surface adsorbed oxygen species, higher ratio of Co³⁺/Co²⁺, strong acidity, high reducibility, and oxygen mobility among the three Co₃O₄-ZSM-5 catalysts, which was beneficial for the improvement of DCM oxidation. In the oxidation of dichloromethane, MH-Co₃O₄@ZSM-5 presented the best activity and mineralization, which was consistent with the characterizations results. Meanwhile, according to the TPSR test, HCl or Cl₂ removal from the catalyst surface was also promoted in MH-Co₃O₄@ZSM-5 by their abundant Brønsted acid sites and the promotion of Deacon reaction by Co₃O₄ or the synergistic effect of Co₃O₄ and ZSM-5. According to the results of in situ DRIFT studies, a possible reaction pathway of DCM oxidation was proposed over the MH-Co₃O₄@ZSM-5 catalysts.     

Promotion Effect of Bismuth on Nickel Electrodeposition and Its Electrocatalysis to Glucose Oxidation

Metallic Bi and Ni were co‐deposited onto the surface of glass carbon electrode (GCE) from the electrolyte solution containing their respective nitrate to fabricate a Bi/Ni alloy modified GCE (Bi/Ni‐GCE). The purpose is to study the influence of Bi³⁺ on the deposition of Ni and that of deposited Bi on the electrocatalytic performance of Ni to glucose in alkali solution. The results show that both redox signal of Ni(OH)₂/NiOOH and Ni(OH)₂/NiOOH mediated electrocatalysis to glucose is remarkably increased in the presence of Bi. It seems that there is a synergistic effect between Bi and Ni on each other’s redox electrochemistry. It’s possible that the firstly deposited Bi on GCE surface helps to the following nucleation and growth of Ni, leading to the deposition of more metallic Ni on GCE surface. An extremely attractive feature of Bi/Ni‐GCE is reflected by the fast response time to the electrocatalytic oxidation of glucose. The electrode nearly responses immediately after glucose is added and it reaches a steady‐state level within only 2 seconds, demonstrating a good electrocatalytic property of Bi/Ni‐GCE. The calibration plot is linear over the wide concentration range of 0–5.8 mM with a sensitivity of 33.96 µA/mM and a correlation coefficient of 0.9985. The detection limit of the glucose was found to be 0.59 µM at a signal‐to‐noise ratio of 3. The fabricated Bi/Ni‐GCE was successfully employed to analyze the glucose level in blood samples, exhibiting high accuracy, strong resistance against inference and good reliability in the practical applications.     

Structural elucidation of new urinary tamoxifen metabolites by liquid chromatography quadrupole time‐of‐flight mass spectrometry

In this study, tamoxifen metabolic profiles were investigated carefully. Tamoxifen was administered to two healthy male volunteers and one female patient suffering from breast cancer. Urinary extracts were analyzed by liquid chromatography quadruple time‐of‐flight mass spectrometry using full scan and targeted MS/MS techniques with accurate mass measurement. Chromatographic peaks for potential metabolites were selected by using the theoretical [M + H]⁺ as precursor ion in full‐scan experiment and m/z 72, 58 or 44 as characteristic product ions for N,N‐dimethyl, N‐desmethyl and N,N‐didesmethyl metabolites in targeted MS/MS experiment, respectively. Tamoxifen and 37 metabolites were detected in extraction study samples. Chemical structures of seven unreported metabolites were elucidated particularly on the basis of fragmentation patterns observed for these metabolites. Several metabolic pathways containing mono‐ and di‐hydroxylation, methoxylation, N‐desmethylation, N,N‐didesmethylation, oxidation and combinations were suggested. All the metabolites were detected in the urine samples up to 1 week. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis of CuI Trifluoromethylselenates for Trifluoromethylselenolation of Aryl and Alkyl Halides

The development of new strategies for synthesis of trifluoromethylthiolate compounds is of considerable importance in pharmaceuticals, agrochemicals, and advanced materials. Accordingly, currently much attention is being devoted to the development of effective methods and reagents for their synthesis. In contrast, considerably less effort has been afforded to the development of preparing C?SeCF₃ bonds. Herein we report a concise route to synthesize a family of copper(I) trifluoromethylselenolate reagents by the reaction of CuI with the Ruppert’s reagent (Me₃SiCF₃), KF, and elemental selenium in the presence of dinitrogen ligands in CH₃CN at room temperature. The reagent [Cu(bpy)(SeCF₃)]₂ was proven to be air‐stable and highly efficient for nucleophilic trifluoromethylthselenolation of a broad range of (hetero)aryl halides and alkyl halides. This method represents a powerful protocol for the construction trifluoromethylselenolate compounds.