Phase transitions in gallium nanodroplets detected by dielectric spectroscopy

Both theoretical and experimental works give evidence that gallium exhibits solid phases labelled , , , besides the stable phase strongly dependent both on the size and the confinement conditions. An experimental technique was used based on capacitance and conductance measurements vs. temperature in the audiofrequency range. This technique is particularly sensitive to the conditions of the investigated particle surface that plays a fundamental role in the melting and more generally in the phase transition processes. In particular the strict relation between the derivative of the capacitance with respect to the temperature, dC/dT, and the entropy of the system is considered. In gallium nanoparticles 20 nm in radius, only the phase is shown to occur. Further the transition to liquid phase was detected. The melting process was found to start about 65 K below the full melting temperature value. In the case of particles 10 nm in radius, where different metastable phases may occur, the capacitance vs. temperature curve was found to display abrupt changes of the slope. The singularities are associated to a well defined transition temperature.     

Complex Convexity and Vector-Valued Littlewood-Paley Inequalities

Let 2 p > , and let X be a complex Banach space. It is shownthat X is p-uniformly PL-convex if and only if there exists > 0 such that , for all f H^p(X). Applications to embeddings between vector-valued BMOAspaces defined via Poisson integral or Carleson measures areprovided. 2000 Mathematics Subject Classification 46B20, 46L52.     

Accurate, high-order representation of complex three-dimensional surfaces via Fourier continuation analysis

We present a new method for construction of high-order parametrizations of surfaces: starting from point clouds, the method we propose can be used to produce full surface parametrizations (by sets of local charts, each one representing a large surface patch – which, typically, contains thousands of the points in the original point-cloud) for complex surfaces of scientific and engineering relevance. The proposed approach accurately renders both smooth and non-smooth portions of a surface: it yields super-algebraically convergent Fourier series approximations to a given surface up to and including all points of geometric singularity, such as corners, edges, conical points, etc. In view of their C^∞ smoothness (except at true geometric singularities) and their properties of high-order approximation, the surfaces produced by this method are suitable for use in conjunction with high-order numerical methods for boundary value problems in domains with complex boundaries, including PDE solvers, integral equation solvers, etc. Our approach is based on a very simple concept: use of Fourier analysis to continue smooth portions of a piecewise smooth function into new functions which, defined on larger domains, are both smooth and periodic. The “continuation functions” arising from a function f converge super-algebraically to f in its domain of definition as discretizations are refined. We demonstrate the capabilities of the proposed approach for a number of surfaces of engineering relevance.     

Cavitation in elastomeric solids: I—A defect-growth theory

It is by now well established that loading conditions with sufficiently large triaxialities can induce the sudden appearance of internal cavities within elastomeric (and other soft) solids. The occurrence of such instabilities, commonly referred to as cavitation, can be attributed to the growth of pre-existing defects into finite sizes. This paper introduces a new theory to study the phenomenon of cavitation in soft solids that: (i) allows to consider general 3D loading conditions with arbitrary triaxiality, (ii) applies to large (including compressible and anisotropic) classes of nonlinear elastic solids, and (iii) incorporates direct information on the initial shape, spatial distribution, and mechanical properties of the underlying defects at which cavitation can initiate. The basic idea is to first cast cavitation in elastomeric solids as a homogenization problem of nonlinear elastic materials containing random distributions of zero-volume cavities, or defects. This problem is then addressed by means of a novel iterated homogenization procedure, which allows to construct solutions for a specific, yet fairly general, class of defects. These include solutions for the change in size of the defects as a function of the applied loading conditions, from which the onset of cavitation — corresponding to the event when the initially infinitesimal defects suddenly grown into finite sizes — can be readily determined. In spite of the generality of the proposed approach, the relevant calculations amount to solving tractable Hamilton-Jacobi equations, in which the initial size of the defects plays the role of “time” and the applied load plays the role of “space”. When specialized to the case of hydrostatic loading conditions, isotropic solids, and defects that are vacuous and isotropically distributed, the proposed theory recovers the classical result of Ball (1982) for radially symmetric cavitation. The nature and implications of this remarkable connection are discussed in detail.     

Stereoregular poly‐O‐methyl [m,n]‐polyurethanes derived from D‐mannitol

Novel linear carbohydrate‐derived [m,n]‐polyurethanes are successfully prepared using D ‐mannitol as renewable and low cost starting material. The key comonomer, 1,6‐di‐O‐phenylcarbonyl‐2,3,4,5‐tetra‐O‐methyl‐D ‐mannitol is polymerized with a diamine synthesized from D ‐mannitol or with alkylenediamines. These polymerization reactions afford, respectively, a [6,6]‐polyurethane entirely based on a carbohydrate derivative or [m,n]‐polyurethanes constituted by a poly‐O‐methyl substituted unit alternating with a polymethylene chain. All these polymers are stereoregular, as result of the C₂ axis of symmetry of mannitol. The optically active polyurethanes are characterized by standard methods (FTIR, RMN, GPC, TGA, and DSC). Thus, GPC analysis reveals weight‐average molecular weights between 18,000 and 25,000 Da. Thermal studies (DSC) indicate that the polymers obtained are amorphous materials with T_g values dependent on the structure and chain length of the diamine constituent. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Structural assessment under uncertain parameters via interval analysis

An efficient health monitoring system for damage detection in civil engineering structures using on-line monitoring data is being developed to identify any possible damage in short time. The present work is based on the treatment of uncertainties, which is one of the basic common difficulties faced when modelling structures. A methodology, based on interval analysis (IA) theory [R.E. Moore, Interval Analysis, Prentice-Hall, Englewood Cliffs, NJ, 1966] applied to a numerical constraint satisfaction problem (CSP) [J.R. Casas, J.C. Matos, J.A. Figueiras, J. Vehí, O. García, P. Herrero, Bridge monitoring and assessment under uncertainty via interval analysis, in: Ninth International Conference On Structural Safety And Reliability—ICOSSAR2005, 2005. pp. 487–494], is implemented in the damage detection [J.R. Casas, J.C. Matos, J.A. Figueiras, J. Vehí, O. García, P. Herrero, Bridge monitoring and assessment under uncertainty via interval analysis, in: Ninth International Conference On Structural Safety And Reliability—ICOSSAR2005, 2005. pp. 487–494] and modelling system of a long-term monitoring project in order to achieve such an objective. An algorithm is being developed for using such methodology with the obtained data.     

Precision measurements in nuclear beta decay

Precision measurements in nuclear beta decay provide sensitive means to determine the fundamental coupling of charged fermions to weak bosons and to test discrete symmetries in the weak interaction. The main motivation of such measurements is to find deviations from Standard Model predictions as possible indications of new physics. I focus here on two topics related to precision measurements in beta decay, namely: (i) the determination of the V _ud element of the Cabibbo-Kobayashi-Maskawa quark mixing matrix from nuclear mirror transitions and (ii) selected measurements of time reversal violating correlations in nuclear and neutron decays. These topics complement those presented in other contributions to this conference.     

Closed graph and open mapping theorems for normed cones

A quasi-normed cone is a pair (X, p) such that X is a (not necessarily cancellative) cone and q is a quasi-norm on X. The aim of this paper is to prove a closed graph and an open mapping type theorem for quasi-normed cones. This is done with the help of appropriate notions of completeness, continuity and openness that arise in a natural way from the setting of bitopological spaces.     

Zur quantitativen Bestimmung der Zellulose in Nahrungsmitteln und F?zes

Ohne Zusammenfassung