Effect of intramolecular pi-pi and CH-pi interactions between ligands on structure, electrochemical and spectroscopic properties of fac-[Re(bpy)(CO)3(PR3)]+(bpy = 2,2'-bipyridine; PR3= trialkyl or triarylphosphines)

Intramolecular pi-pi and CH-pi interactions between the bpy and PR3 ligands of fac-[Re(bpy)(CO)3(PR3)]+ affect their structure, and electrochemical and spectroscopic properties. Intramolecular CH-pi interaction was observed between the alkyl groups on the phosphine ligand (R =nBu, Et) and the bpy ligand, and intramolecular pi-pi and CH-pi interactions were both observed between the aryl group(s) on the phosphorus ligand (R =p-MeOPh, p-MePh, Ph, p-FPh, OPh) and the bpy ligand, while no such interactions were found in the trialkylphosphite complexes (R = OiPr, OEt, OMe). The intramolecular interactions distort the pyridine rings of the bpy ligand as long as 3.7 x 10(-2)A in crystals. Molecular orbital calculations of the bpy ligand suggest that this distortion decreases the energy gap between its pi and pi* orbitals. An absorption band attributed to the pi-pi*(bpy) transition of the distorted rhenium complexes, measured in a KBr pellet, was red-shifted by 1-5 nm compared to the complexes without the distorted bpy ligand. Even in solution, similar red shifts of the pi-pi*(bpy) absorption were observed. The redox potential E1/2(bpy/bpy*-) of the complexes with the trialkylphosphine and triarylphosphine ligand are shifted positively by 110-120 mV and 60-80 mV respectively, compared with those derived from the electron-attracting property of the phosphorus ligand. In contrast with these properties, three nu(CO) IR bands, which are sensitive to the electron density on the central rhenium because of pi-back bonding, were shifted to higher energy, and a Re(I/II)-based oxidation wave was observed at a more positive potential according to the electron-attracting property of the phosphorus ligand.     

Reaction potential map analysis of chemical reactivity—III

Reaction potential maps (RPM) have been introduced as a new tool for the study of molecular reactivity. The equipotential energy maps, which are created on given planes around a molecule, define reaction contours towards specific counter-reagent models and are evaluated by perturbation theory. Since the calculated interaction energy involves electrostatic, polarization, exchange, and charge transfer energies, the RPM's can be used to predict site selectivity in a variety of chemical reactions. We found that the calculated RPM's of the SCN^– anion explained well the experimental observations that it reacts at the S atom with soft electrophiles and at the N atom with hard electrophiles. The difference in reactivity between SCN^– and OCN^– was clearly shown by the RPM's of these anions. The ambident nucleophilic nature of the NO ₂ ^– and the CH₂CHO^– anions was also well represented by their RPM's.     

Microwave spectroscopic study on the molecular structure and the quadrupole coupling constants of thionyl chloride

Microwave spectra of thionyl chloride, SO³⁵Cl₂ and SO³⁵Cl³⁷Cl, in the frequency range 8–25 GHz have been analyzed. The rotational constants have been obtained from the low J transition frequencies. The r_S coordinates of Cl atoms and the r_o structure have been evaluated with some assumptions: r(S-O) = 1.435 ± 0.011± Å, r(S—Cl) = 2.072 0.005 Å, ∠ OSCl = 108.00 ± 0.06°, ∠ ClSCl = 97.15 ± 0.30°. Nuclear quadrupole coupling constants have been obtained for the SO³⁵Cl₂, species: x_aa = ?25.02 ± 0.04 MHz, x(_bb = ?0.25 ± 0.04 MHz, X_cc = 25.27 ± 0.08 MHz, and X_zz = ?96.75 MHz. The values obtained are compared with those of other workers.     

One-step furan ring formation: Synthesis of furo[3,2-h]quinolones

The one-pot reaction of ethyl 1-cyclopropyl-6,7,8-trifluoro-1,4-dihydro-4-oxoquinoline-3-carboxylate ( 6 ) with tert-butyl acetoacetate gave 3-tert-butyl 7-ethyl 9-cyclopropyl-4-fluoro-6,9-dihydro-2-methyl-6-oxofuro[3,2-h]quinoline-3,7-dicarboxylate ( 5 ). This regioselective cyclization was rationalized by the Hard and Soft Acids and Bases principle. By use of a similar furan-forming reaction, we prepared 2-(amino-methyl)furo[3,2-h]quinoline-7-carboxylic acid 4 . Compound 4 showed weak antibacterial activity.     

Completely stereocontrolled synthesis of the right fragment of salinomycin,a polyether antibiotic,by means of the chelation-controlled grignard reaction

In the course of our synthetic study of salinomycin ($\text{1}$), an ionophorous polyether antibiotic, the γ-lactone ($\text{2}$) corresponding to the C-21～C-30 fragment (the right fragment) of $\text{1}$ was synthesized from D-mannitol and ethyl L-lactate as chiral starting materials. The complete stereocontrol for the construction of new chiral centers has been achieved by means of the chelation-controlled Grignard reaction and the tetrahydropyran synthesis via the acid catalyzed epoxide ring opening.     

Physicochemical characterization of degradable thermosensitive polymeric micelles

Amphiphilic AB block copolymers consisting of thermosensitive poly(N-(2-hydroxypropyl) methacrylamide lactate) and poly(ethylene glycol), pHPMAmDL-b-PEG, were synthesized via a macroinitiator route. Dynamic light scattering measurements showed that these block copolymers form polymeric micelles in water with a size of around 50 nm by heating of an aqueous polymer solution from below to above the critical micelle temperature (cmt). The critical micelle concentration as well as the cmt decreased with increasing pHPMAmDL block lengths, which can be attributed to the greater hydrophobicity of the thermosensitive block with increasing molecular weight. Cryogenic transmission electron microscopy analysis revealed that the micelles have a spherical shape with a narrow size distribution. 1H NMR measurements in D2O showed that the intensity of the peaks of the protons from the pHPMAmDL block significantly decreased above the cmt, indicating that the thermosensitive blocks indeed form the solidlike core of the micelles. Static light scattering measurements demonstrated that pHPMAmDL-b-PEG micelles with relatively large pHPMAmDL blocks possess a highly packed core that is stabilized by a dense layer of swollen PEG chains. FT-IR analysis indicated that dehydration of amide bonds in the pHPMAmDL block occurs when the polymer dissolved in water is heated from below to above its cmt. The micelles were stable when an aqueous solution of micelles was incubated at 37 degrees C and at pH 5.0, where the hydrolysis rate of lactate side groups is minimized. On the other hand, at pH 9.0, where hydrolysis of the lactic acid side groups occurs, the micelles started to swell after 1.5 h of incubation and complete dissolution of micelles was observed after 4 h as a result of hydrophilization of the thermosensitive block. Fluorescence spectroscopy measurements with pyrene loaded in the hydrophobic core of the micelles showed that when these micelles were incubated at pH 8.6 and at 37 degrees C the microenvironment of pyrene became increasingly hydrated in time during this swelling phase. The results demonstrate the potential applicability of pHPMAmDL-b-PEG block copolymer micelles for the controlled delivery of hydrophobic drugs.     

Dinitrogen formation by oxidative intramolecular N---N coupling in cis,cis-[(bpy)2(NH3)RuORu(NH3)(bpy)2]4+

The (15)N-labeled diammine(mu-oxo)ruthenium complex cis,cis-[(bpy)(2)(H(3)(15)N)Ru(III)ORu(III)((15)NH(3))(bpy)(2)](4+) ((2-(15)N)(4+)) was synthesized from cis,cis-[(bpy)(2)(H(2)O)Ru(III)ORu(III)(H(2)O)(bpy)(2)](4+) by using ((15)NH(4))(2)SO(4) and isolated as its perchlorate salt in 17% yield. A 1:1 mixture of (2-(15)N)(4+) and nonlabeled cis,cis-[(bpy)(2)(H(3)(14)N)Ru(III)ORu(III)((14)NH(3))(bpy)(2)](4+) were electrochemically oxidized in aqueous solution. The gaseous products (14)N(2) and (15)N(2) were formed in equimolar amounts with only a small amount of (14)N(15)N detected. This demonstrates that dinitrogen formation by oxidation of the diammine complex proceeds by intramolecular N---N coupling.     

Calorimetric study of the glassy state XII. Plural glass-transition phenomena of ethanol

Ethanol was found to give a metastable crystalline phase (crystal-II) when the liquid was cooled at a moderate rate. Glassy states of liquid and of newly found crystal-II were obtained in the calorimeter cell by controlling the cooling rate of the liquid. The heat capacities of these phases as well as that of the stable crystal-I were measured by an adiabatic calorimeter in the temperature range between 14 and 300 K. The glass transition temperature T_g, the heat-capacity jump at T_g, and the residual entropy were found to be 97 K, 35.3 J K^?1 mol^?1, and 8.93 J K^?1 mol^?1 for the glassy liquid, and 97 K, 22.8 J K^?1 mol^?1, and 4.24 J K^?1 mol^?1 for the glassy crystal-II, respectively. The values for the residual entropy are referred to the third-law entropy for crystal-I.The heat capacities reported previously for the supercooled liquid by Gibson et al. and by Parks and Kelley agree well with those for the metastable crystal-II. Those of the supercooled liquid connect smoothly with those obtained for the liquid above the melting temperature. Thus, ethanol is found to be another example of a low-molecular-weight compound which shows multiple glass-transition phenomena.     

Diastereoselective Iodocarbocyclization Reaction of 2- or 3-Oxy-4-pentenylmalonate Derivatives

1,2- Or 1,3-asymmetric induction in the iodocarbocyclization reaction of 4-pentenylmalonate derivatives having a stereogenic center at an allylic or a homoallylic position has been investigated. The iodocarbocyclization reactions of 3-oxy-4-pentenylmalonate derivatives proceeded with high cis-selectivity through stereoelectronic control of the oxygenated substituent at an allylic position. In the reaction of (S)-2-siloxy-4-pentenylmalonate, an excellent diastereoselectivity was achieved through the utilization of double stereodifferentiation with a chiral titanium catalyst. Furthermore, as an application of the present reaction, the asymmetric syntheses of cyclosarkomycin and a synthetic intermediate of brefeldin A from optically pure 2- and 3-oxy-4-pentenylmalonate derivatives are also described.     

Assembly of azido- or cyano-bridged binuclear complexes containing the bulky [Mn(phen)2]2+ building block: syntheses, crystal structures, and magnetic properties

Two new cyano-bridged heterobinuclear complexes, [Mn(II)(phen)2Cl][Fe(III)(bpb)(CN)2] x 0.5CH3CH2OH x 1.5H2O (1) and [Mn(II)(phen)2Cl][Cr(III)(bpb)(CN)2] x 2H2O (2) [phen = 1,10-phenanthroline; bpb(2-) = 1,2-bis(pyridine-2-carboxamido)benzenate], and four novel azido-bridged Mn(II) dimeric complexes, [Mn2(phen)4(mu(1,1)-N3)2][M(III)(bpb)(CN)2]2 x H2O [M = Fe (3), Cr (4), Co (5)] and [Mn2(phen)4(mu(1,3)-N3)(N3)2]BPh4 x 0.5H2O (6), have been synthesized and characterized by single-crystal X-ray diffraction analysis and magnetic studies. Complexes 1 and 2 comprise [Mn(phen)2Cl]+ and [M(bpb)(CN)2]- units connected by one cyano ligand of [M(bpb)(CN)2]-. Complexes 3-5 are doubly end-on (EO) azido-bridged Mn(II) binuclear complexes with two [M(bpb)(CN)2]- molecules acting as charge-compensating anions. However, the Mn(II) ions in complex 6 are linked by a single end-to-end (EE) azido bridging ligand with one large free BPh4(-) group as the charge-balancing anion. The magnetic coupling between Mn(II) and Fe(III) or Cr(III) in complexes 1 and 2 was found to be antiferromagnetic with J(MnFe) = -2.68(3) cm(-1) and J(MnCr) = -4.55(1) cm(-1) on the basis of the Hamiltonian H = -JS(Mn)S(M) (M = Fe or Cr). The magnetic interactions between two Mn(II) ions in 3-5 are ferromagnetic in nature with the magnetic coupling constants of 1.15(3), 1.05(2), and 1.27(2) cm(-1) (H = -JS(Mn1)S(Mn2)), respectively. The single EE azido-bridged dimeric complex 6 manifests antiferromagnetic interaction with J = -2.29(4) cm(-1) (H = -JS(Mn1)S(Mn2)). Magneto-structural correlationship on the EO azido-bridged Mn(II) dimers has been investigated.