New example of a non-heme mononuclear iron(IV) oxo complex. Spectroscopic data and oxidation activity

The green complex S=1 [(TPEN)FeO]2+ [TPEN=N,N,N',N'-tetrakis(2-pyridylmethyl)ethane-1,2-diamine] has been obtained by treating the [(TPEN)Fe]2+ precursor with meta-chloroperoxybenzoic acid (m-CPBA). This high-valent complex belongs to the emerging family of synthetic models of Fe(IV)=O intermediates invoked during the catalytic cycle of biological systems. This complex exhibits spectroscopic characteristics that are similar to those of other models reported recently with a similar amine/pyridine environment. Thanks to its relative stability, vibrational data in solution have been obtained by Fourier transform infrared. A comparison of the Fe=O and Fe=(18)O wavenumbers reveals that the Fe-oxo vibration is not a pure one. The ability of the green complex to oxidize small organic molecules has been studied. Mixtures of oxygenated products derived from two- or four-electron oxidations are obtained. The reactivity of this [FeO]2+ complex is then not straightforward, and different mechanisms may be involved.     

Anodic Stripping Voltammetry of Heavy Metals at Nanocrystalline Boron‐Doped Diamond Electrode

Boron‐doped Diamond (BDD) electrode has become one of the important tools for heavy metal detection. By studying some analytical parameters of DPASV method, like deposition time and potential in different electrolyte concentrations (acetate buffer), the conditions for detecting very low metal ion levels (Zn, Cd, Pb, and Cu) could be chosen. Diluted electrolyte (0.01 M buffer) was one of the factors favoring low detection and quantification limits, but its quantification range is short in comparison to more concentrated media. For ?1.7 V deposition potential, the detection of single metal at ppb levels was reached in 60 s deposition time. Understanding different metal‐metal interactions shows the limits to the simultaneous determination of heavy metals at BDD. Quantification was possible for the simultaneous determination of Zn, Cd and Pb despite the overlapping of Zn and Cd peaks. The performance of the BDD was compared with that of another C‐based solid electrode: the glassy carbon electrode (without mercury plating). A lower base line current, wider potential range, higher sensitivity (3 to 5 times higher than GC) and longevity of the material were noticed for the BDD.     

Relationship between the longitudinal relaxation rates of water protons and of well defined paramagnetic centers at low temperature in hydrated vermiculite

A good agreement has been observed between the proton longitudinal relaxation rate in the two and one layer hydrate of the Na-Llano vermiculite, the location of the Fe³⁺ paramagnetic centers within the octahedral and tetrahedral layers of the lattice and the electronic longitudinal relaxation rate using the dipolar electronic—proton spin interaction. The water content influences noticeably the electronic longitudinal relaxation time.     

Broad-band spectroscopy of a vanadyl porphyrin: a model electronuclear spin qudit

We explore how to encode more than a qubit in vanadyl porphyrin molecules hosting a S = 1/2 electronic spin coupled to a I = 7/2 nuclear spin. The spin Hamiltonian and its parameters, as well as the spin dynamics, have been determined via a combination of electron paramagnetic resonance, heat capacity, magnetization and on-chip magnetic spectroscopy experiments performed on single crystals. We find low temperature spin coherence times of micro-seconds and spin relaxation times longer than a second. For sufficiently strong magnetic fields (B > 0.1 T, corresponding to resonance frequencies of 9–10 GHz) these properties make vanadyl porphyrin molecules suitable qubit realizations. The presence of multiple equispaced nuclear spin levels then merely provides 8 alternatives to define the ‘1’ and ‘0’ basis states. For lower magnetic fields (B < 0.1 T), and lower frequencies (<2 GHz), we find spectroscopic signatures of a sizeable electronuclear entanglement. This effect generates a larger set of allowed transitions between different electronuclear spin states and removes their degeneracies. Under these conditions, we show that each molecule fulfills the conditions to act as a universal 4-qubit processor or, equivalently, as a d = 16 qudit. These findings widen the catalogue of chemically designed systems able to implement non-trivial quantum functionalities, such as quantum simulations and, especially, quantum error correction at the molecular level.

We show that a sizeable electronuclear entanglement of the S = 1/2 and I = 7/2 spins of a vanadyl porphyrin provides the conditions to act as a universal 4-qubit processor, and thus implement quantum error correction at the molecular level.     

1-Methoxycarbonyl-substituiertes 2,3-Dihydropyridin-4(1H)-on (= Methyl-1,2,3,4-tetrahydro-4-oxopyridin-1-carboxylat) als Chromophor für die photochemische [2 + 2]-Cycloaddition

1-Methoxycarbonyl-Substituted 2,3-Dihydropyridin-4(1H)-one(= Methyl 1,2,3,4-Tetrahydro-4-oxopyridine-1-carboxylate) as Chromophore for Photochemical [2 + 2]-Cycloadditions With olefins having an electron-acceptor as well as with olefins having an electron-donor substituent, 1-methoxycarbonyl-substituted dihydropyridinone 12 undergoes [2 + 2] cycloaddition in good preparative yields. The photochemical cycloaddition is highly regioselective. For preparative purposes, the ring junction can be equilibrated to the thermodynamically more stable cis-junction. Only the ‘endo’/‘exo’ selectivity at the C-atom bearing the olefin substituent cannot be controlled. The photodimerization of 12 is the only side reaction. Using a slight excess of the olefin, the photodimerization can be suppressed. The protecting group at the N-atom of the dihydropyridinone can be varied in order to introduce an internal sensitizer, as shown with 1-acyl-substituted compound 29 , which underwent the cycloaddition process even with sunlight.     

Analysis of neem oils by LC–MS and degradation kinetics of azadirachtin-A in a controlled environment

Since it was first isolated, the oil extracted from seeds of neem (Azadirachtin indica A juss) has been extensively studied in terms of its efficacy as an insecticide. Several industrial formulations are produced as emulsifiable solutions containing a stated titer of the active ingredient azadirachtin-A (AZ-A). The work reported here is the characterization of a formulation of this insecticide marketed under the name of Neem-azal T/S and kinetic studies of the major active ingredient of this formulation. We initially performed liquid–liquid extraction to isolate the neem oil from other ingredients in the commercial mixture. This was followed by a purification using flash chromatography and semi-preparative chromatography, leading to ¹³C NMR identification of structures such as azadirachtin-A, azadirachtin-B, and azadirachtin-H. The neem extract was also characterized by HPLC–MS using two ionization sources, APCI (atmospheric pressure chemical ionization) and ESI (electrospray ionization) in positive and negative ion modes of detection. This led to the identification of other compounds present in the extract—azadirachtin-D, azadirachtin-I, deacetylnimbin, deacetylsalannin, nimbin, and salannin. The comparative study of data gathered by use of the two ionization sources is discussed and shows that the ESI source enables the largest number of structures to be identified. In a second part, kinetic changes in the main product (AZ-A) were studied under precise conditions of pH (2, 4, 6, and 8), temperature (40 to 70 °C), and light (UV, dark room and in daylight). This enabled us to determine the degradation kinetics of the product (AZ-A) over time. The activation energy of the molecule (75±9 kJ mol^–1) was determined by examining thermal stability in the range 40 to 70 °C. The degradation products of this compound were identified by use of HPLC–MS and HPLC–MS–MS. The results enabled proposal of a chemical degradation reaction route for AZ-A under different conditions of pH and temperature. The data show that at room temperature and pH between 4 and 5 the product degrades into two preferential forms that are hydrolyzed to a single product over time and as a function of pH change.     

Anionic copper complex fragmentations from enkephalins under low-energy collision-induced dissociation in an ion trap mass spectrometer

Peptide metallation with Cu2+ was explored in the negative ESI mode using an ion trap mass spectrometer. Under these conditions, the [(M-3H) + CuII]- species formed were investigated under low-energy collision-induced dissociation conditions. MS2 experiments indicate a very different behavior of CuII metallated complexes compared with [M-H]- species. CuII induces an easy loss of CO2 and specific side-chain cleavages (by radical losses) at the C-terminal residue, as observed previously by prompt 'in source' dissociation experiments. The loss of CO2 yields an unstable carbylide that leads to further dissociations involving the migration of a proton or a hydrogen radical (through the reduction of CuII). Multistage MS3 experiments were carried out to rationalize this behavior. Fragmentation pathways are proposed in order to explain the product ions observed. The side-chain radical loss at the C-terminus was demonstrated to be a consecutive process. Finally, evidence is provided that the specific side-chain cleavages can be used for the differentiation of Leu/Ile and Gln/Lys residues when they are located at the C-terminus. The existence of a zwitterionic form in the case of the anionic YGGFK-CuII complex is proposed.     

The determination of10B by prompt proton spectrometry

Boron was analysed in ore and glass samples by prompt proton spectrometry, using deuterons of 2.7 MeV to coincide with a region where the excitation function of the¹⁰B(d, p)¹¹B reaction did not vary appreciably with energy. Targets of approximately 300 μg/cm² thick of powdered samples were prepared by centrifugation. Concentrations down to 0.2% were determined. Possible interference by other elements, particularly nitrogen, magnesium and titanium, was investigated.     

Nouveaux exemples d'acétonides d'aldéhydosucres furanniques

Further examples of O-isopropylidenaldehydosugars in the furanose series Formyl-bearing furanose derivatives 1–3 (α-D -xylo or α-D -erythro configurations) and 5–8 (configurations α-D -ribo, α-D -lyxo, β-L -threo and D -arabino) have been prepared by classical synthetic steps and their properties mainly spectroscopic, reported. The coupling constant between the formyl and the vicinal proton is always small. Like other members of the series, these new aldehydosugars constitute very useful and flexible synthetic intermediates.