Determination of lead in the urine of exposed and unexposed adults by extraction and flow-injection/atomic absorption spectrometry

Lead is extracted from urine with ammonium pyrrolidien dithiocrbamate into methyl isobutyl ketone, and 20 μl of the extract is injected into a water carrier stream in a flow-injection/atomic absorption system. The procedure is simple, quick, accurate and reproducible. Recoveries are 96–105%. The mean urine lead contents of 20 unexposed and 20 printing-press lead exposed workers was found to be 39.0 ± 8.3 and 71.7 ± 26.3 μg Pb l^?1, respectively.     

Synthesis and characterization of nanoparticulate MnS within the pores of mesoporous silica

Mesoporous silica was loaded with nanoparticulate MnS via a simple post-synthesis treatment. The mesoporous material that still contained surfactant was passivated to prevent MnS formation at the surface. The surfactant was extracted and a novel manganese ethylxanthate was used to impregnate the pore network. This precursor thermally decomposes to yield MnS particles that are smaller or equal to the pore size. The particles exhibit all three common polymorphs. The passivation treatment is most effective at lower loadings because at the highest loadings (SiO₂:MnS molar ratio of 6:1) large particles (>50 nm) form at the exterior of the mesoporous particles. The integrity of the mesoporous network is maintained through the preparation and high order is maintained. The MnS particles exhibit unexpected ferromagnetism at low temperatures. Strong luminescence of these samples is observed and this suggests that they may have a range of important application areas.     

Thermodynamic characteristics of thermal dissociation of platinum tetrachloride

The pressure of thermal dissociation of platinum tetrachloride by the first step PtCl₄(s) = PtCl₃(s) + 0.5 Cl₂(g) was measured by the static method with a quartz membrane-gauge zero-pressure manometer. An approximating equation for the dissociation pressure vs. temperature was found. The enthalpy (52160±880 J mol⁻¹) and entropy (72.1±1.6 J mol⁻¹ K⁻¹) of dissociation were calculated. The heat of formation found for platinum tetrachloride (−246.3±1.3 kJ mol⁻¹) at 298.15 K agrees well with the value obtained by the calorimetric method (−245.6±1.9 kJ mol⁻¹).__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2028–2031, October, 2004.     

Structural basis for discriminative regulation of gene expression by adenine- and guanine-sensing mRNAs

Metabolite-sensing mRNAs, or "riboswitches," specifically interact with small ligands and direct expression of the genes involved in their metabolism. Riboswitches contain sensing "aptamer" modules, capable of ligand-induced structural changes, and downstream regions, harboring expression-controlling elements. We report the crystal structures of the add A-riboswitch and xpt G-riboswitch aptamer modules that distinguish between bound adenine and guanine with exquisite specificity and modulate expression of two different sets of genes. The riboswitches form tuning fork-like architectures, in which the prongs are held in parallel through hairpin loop interactions, and the internal bubble zippers up to form the purine binding pocket. The bound purines are held by hydrogen bonding interactions involving conserved nucleotides along their entire periphery. Recognition specificity is associated with Watson-Crick pairing of the encapsulated adenine and guanine ligands with uridine and cytosine, respectively.     

Study of the Retention Behavior of Newly Synthesized s-Triazine Derivatives in RP TLC Systems,and the Lipophilicity of the Compounds

JPC – Journal of Planar Chromatography – Modern TLC - The chromatographic behavior of nine newly synthesized s-tri-azines has been studied by thin-layer chromatography on C18/UV254...     

Photochemistry of the alkaloids eudistomin N (6-bromo-nor-harmane) and eudistomin O (8-bromo-nor-harmane) and other bromo-beta-carbolines

The UV-absorption, fluorescence excitation and emission spectra of the alkaloids eudistomin N (6-bromo-nor-harmane) and eudistomin O (8-bromo-nor-harmane) were described. In order to perform a comparative analysis, we also studied other bromo-beta-carbolines and the corresponding non-substituted-carboline. Thus, 6-bromo-, 8-bromo-, 6,8-dibromo-, 3,6-dibromo- and 3,6,8-tribromo-derivatives of nor-harmane, harmane and harmine were studied. These studies were performed in EtOH and in EtOH + 1% perchloric acid solutions (pa). Furthermore, fluorescence quantum yields (phi(f)) in acetonitrile and acetonitrile + 1% perchloric acid solutions at 298 K were measured. The HOMO and LUMO energy, the positions (lambda(max)) and oscillator strength (f) of the (1)S(1) <--(1)S(0) band for all the neutral and protonated beta-carbolines studied was calculated and compared with the experimental data. The pK(a) values in aqueous solution for eudistomin N and O (6-bromo- and 8-bromo-nor-harmane), for 6-bromo-, 8-bromo- and 6,8-dibromo-harmane, and for 6-bromo- and 8-bromo-harmine were spectrophotometrically measured (pK((a)(H(2)O))) . The change of the acid-base character of these compounds on going from the ground state (pK(a)) to the first electronic excited singlet state (pK(a)(*)) as DeltapK(a) = pK(a)(*)-pK(a) = 0.625 Deltanu /T, in ethanol solution at 298 K were calculated (DeltapK(a(EtOH))). Proton affinities (PA) for all the compounds studied defined as minus the enthalpy change of the reaction M+H(+)--> MH(+) (gas state) were calculated. Basicity relative to pyridine (DeltaH(rPy)) defined as the enthalpy change of the isodesmic reaction MH(+) + Py--> M + PyH(+) (gas state) was also calculated. The effect of bromine as substituent on the properties of the beta-carboline moiety in nor-harmane, harmane and harmine is discussed.     

Optimization of the Conditions for the Cr (III) Adsorption on Activated Carbon

In order to understand the patterns of the adsorption equilibrium of Cr (III) on activated carbon, the adsorption process was studied by two different ways: classical batch experiments on commercial Norit and Merck activated carbons and their oxidized forms in a wide range of pHs; and extended time-based tests at the same pH values on the same adsorbents. This approach allowed us to understand the role of texture, chemical carbon surface functionality and experimental conditions (initial pH of the solution, contact time and adsorbate/adsorbent ratio) on the effectiveness of Cr (III) removal. The adsorption process of Cr (III) at (24 ± 1^∘C) on Merck and Norit activated carbons and their oxidized forms were studied at pH values between 1.5 and 5 (either adjusted or buffered). Chromium concentration was fixed at 200 ppm. The carbon loading ranged from 1.2 to 20 g/l. The carbon/Cr (III) solution contact time was varied from 0.5–1 month to 5 months, to ensure that the saturation of the carbon level was reached. According to the data obtained, the presence of carboxylic groups on carbon surface seems to enhance Cr (III) uptake at initial pH of the solution in the range between 2 and 4. Depending on the nature of the adsorbent surface chemistry, the contact time to reach equilibrium may range from 3 to 5 months. There is an optimum carbon loading which limits the Cr (III) uptake/removal at given pH value. In order to understand the adsorption process, an ion exchange, surface complex and surface precipitation were considered. This paper was presented in the 5th Brazilian Meeting on Adsorption, held at Natal, Brazil, 18-21 July, 2004.     

Interactions of D-Maltose and Sucrose with Some Amino Acids in Aqueous Solutions

Calorimetric titrations have been performed at 298.15 K in aqueous solutions to derive the stability constants and thermodynamic parameters of the interactions of D-maltose and sucrose with some amino acids (glycine, DL-alanine, DL-leucine, and L-serine). The apparent molal volumes of the disaccharides in dilute aqueous solutions of the amino acids have been determined from density measurements at 298.15 K. In contrast to D-maltose, sucrose was found to associate with the amino acids and these associated species are preferentially entropy stabilized. These results are interpreted in terms of the influence of the nature of the solutes, their specific conformations, and hydration, on the ability of the disaccharides to form associated complexes with the amino acids.     

Methanol electrooxidation on platinum mesh electrodes bonded to solid polymer electrolytes

Methanol electrooxidation on smooth platinum electrodes bonded to solid polymer electrolytes was studied in water and acid solution by voltammetric measurements with different scanning rates. An enhancement of the oxidation rates was observed in these systems as compared to identical platinum electrodes in contact with liquid electrolytes. This electrocatalytic effect strongly depends on the measuring conditions and on the electrode potential. The reasons for the catalytic effects at different potentials are discussed. Received: 8 January 1997 / Accepted: 1 December 1997     

Synthesis of vinyl esters of organosilicon carboxylic acids

Conclusions The vinylation of -silicon-containing carboxylic acids by acetylene under the influence of zinc and cadmium salts was investigated. A method was found for producing organosilicon complex vinyl esters.