Applications of an adiabatic rotational model to the Ar…O2 van der Waals molecule

In this paper a separation of vibrational and rotational motions is applied to describe the metastable levels of the ArO₂ van der Waals molecule. The potential energy surface is written as a sum of atom—atom pairwise Morse functions, the parameters being obtained by fitting the potential of Pirani and Vecchiocattivi at the equilibrium configuration. The results agree fairly well with experimental data about infrared absorption, assuming a J = 2 → 1 transition, where J is the quantum number associated to the total angular momentum of the complex. Also, close coupling three-dimensional calculations about the ArO₂ collision show a good agreement with some energies previously calculated. The widths for rotational predissociation have been estimated by this procedure to be of the order of 1 cm^?1.     

Gasification in air and in steam of a partly demineralized and heat-treated coal

The gasification in air and in steam of a bituminous coal from Belmez (Cordoba, Spain) (SAO) and of samples resulting either from acid treatment (HCl, SAH; HNO₃ SAN and HF, SAF) or from thermal treatment (SAOC) has been studied under dynamic conditions. For gasification in air, the sequence of variation of the reactivity is SAN > SAF>SAH>SAO at lower gasification temperatures, and SAF>SAH>SAN>SAO at higher treatment temperatures. In steam, however, the sequence is SAF>SAO, SAH>SAN in the whole interval of gasification temperatures. SAOC shows a reactivity much lower than SAO in both reactant gases. The results are explained by considering the feasible effects of the treatments on the textural characteristics and on the chemical surface of the coal.     

Identification of peptides that neutralize bacterial endotoxins using β-hairpin conformationally restricted libraries

Bacterial endotoxins are the major mediator of septic shock; therefore, endotoxin-neutralizing molecules could have biomedical applications. The septic shock cascade relies in a series of molecular recognition processes. The large contact-surface described for the interacting macromolecules, in most cases, prevents the identification of small molecules that could modulate such recognition events. Here we report on a beta-hairpin conformationally restricted combinatorial library that has been generated and screened towards the identification of new peptides that neutralize bacterial endotoxins. Starting with a de novo designed linear peptide that shows a beta-hairpin structure population of around 30%, (Ramirez-Alvarado, M., Blanco, F. J. and Serrano, L. Nat. Struc. Biol., 7, 604-612 (1996)), we selected four positions to build up a combinatorial library of 20(4) sequences. Deconvolution of the library reduced such a sequence complexity to 8 defined sequences. The newly identified peptides have a biological activity equivalent to that reported for peptides derived from natural endotoxin-binding proteins.     

Indole-substituted 2,4-diamino-5,8-dihydropyrido[2,3-d]pyrimidines from one-pot process and evaluation of their ability to bind dopamine receptors

A series of novel 7-indole substituted 2,4-diamino-5,8-dihydropyrido[2,3-d]pyrimidine analogous to the 2,4-diaminopteridine core were synthesized by the three-component one-pot cyclocondensation between 2,4,6-triaminopyrimidine, 3-(2-cyanoacetyl)indole and aromatic aldehydes. The reactions, which exhibited good performance, proceeded in EtOH using indium (III) chloride as catalyst under microwave irradiation, in short reaction times. On the basis of certain structural similarity of these compounds with known ligands of the D2 dopamine receptors (D2DR), the study of these compounds as possible ligands of dopamine D2 and D1 receptors was carried out. Three of them showed moderate affinity to D2-DR since the Ki D1/D2 ratio reached values of 40, 65 and 31 for compounds 4c, 4k and 4j, respectively. Finally, molecular modeling studies revealed stronger molecular interactions of such derivatives with the D2DR than with D1DR, what agrees with the experimental data, and gives an additional support to the observed selectivity to the D2DR.     

Use of p-toluenesulfonic acid for the controlled grafting of alkoxysilanes onto silanol containing surfaces: preparation of tunable hydrophilic, hydrophobic, and super-hydrophobic silica

The modification of Aerosil 200 has been carried out using methoxysilanes in toluene reflux, with p-toluenesulfonic acid as the catalyst. Both trimethoxyalkyl silanes (methyl, ethyl, propyl, butyl, hexyl, octyl, and octadecyl) and trialkylmethoxy silanes (trimethyl and dimethyloctyl) have been used. The surface has been studied by 29Si NMR, 13C NMR, elemental analysis, thermogravimetry, water contact angle, and BET analysis. When incorporating trimethoxysilanes, a plateau of modification was achieved after 1 h of reflux, while when using trialkylmethoxy silanes, a longer time of about 7 h was required. The average number of molecules incorporated in both cases has been well above those reported by other authors in similar reactions and in much shorter times. Depending on the modification agent and on the experimental conditions, the resulting organosilicas are in seven cases superhydrophobic, in three cases hydrophobic, and in two cases hydrophilic. Two structural origins for superhydrophobicity have been identified in these samples: almost complete disappearance of water accessible surface silanols (smallest methoxysilanes) and shielding of would-be water accessible surface silanols by long aliphatic tails. These features can be very precisely controlled.     

Microwave-assisted headspace single-drop microextration of chlorobenzenes from water samples

A one-step and in-situ sample preparation method used for quantifying chlorobenzene compounds in water samples has been developed, coupling microwave and headspace single-drop microextraction (MW-HS-SDME). The chlorobenzenes in water samples were extracted directly onto an ionic liquid single-drop in headspace mode under the aid of microwave radiation. For optimization, a Plackett-Burman screening design was initially used, followed by a mixed-level factorial design. The factors considered were: drop volume, aqueous sample volume, stirring speed, ionic strength, extraction time, ionic liquid type, microwave power and length of the Y-shaped glass-tube. The optimum experimental conditions found from this statistical evaluation were: a 5 μL microdrop of 1-hexyl-3-methylimidazolium hexafluorophosphate exposed for 20 min to the headspace of a 30 mL aqueous sample, irradiated by microwaves at 200 W and placed in a 50 mL spherical flask connected to a 25 cm Y-shaped glass-tube. Under the optimised experimental conditions, the response of a high performance liquid chromatographic system was found to be linear over the range studied and with correlation coefficients ranging between 0.9995 and 0.9999. The method showed a good level of repeatability, with relative standard deviations varying between 2.3 and 8.3% (n = 5). Detection limits were found in the low μg L⁻¹ range varying between 0.016 and 0.039 μg L⁻¹. Overall, the performance of the proposed method demonstrated the favourable effect of microwave sample irradiation upon HS-SDME. Finally, recovery studies from different types of environmental water samples revealed that matrix had little effect upon extraction.     

Colored inks analysis and differentiation: a first step in artistic contemporary prints discrimination

Prints are the most popular artistic technique. Due to their manufacturing procedure, they are also one of the most frequently falsified types of artwork. In terms of their economic and historic value, the chemical analysis and characterisation of coloured inks and their principal constituent materials (pigments), together with the historical and aesthetic information available in the Catalogues Raisonées, are important tools in distinguishing originals from non-original prints.The chemical characterisation and discrimination of coloured inks has test in this study. Analysis using Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM) and X-ray diffraction (XRD) has been done on blue pigments and inks, due to this colour is one of the most representative for the presence of organic and inorganic materials in their composition. Conclusion obtained for this colour would demonstrate the capability of the approach when it is applied to any other coloured set of inks.