Evaluation of the acoustic and non-acoustic properties of sound absorbing materials using a three-microphone impedance tube

This paper presents a straightforward application of an indirect method based on a three-microphone impedance tube setup to determine the non-acoustic properties of a sound absorbing porous material. First, a three-microphone impedance tube technique is used to measure some acoustic properties of the material (i.e., sound absorption coefficient, sound transmission loss, effective density and effective bulk modulus) regarded here as an equivalent fluid. Second, an indirect characterization allows one to extract its non-acoustic properties (i.e., static airflow resistivity, tortuosity, viscous and thermal characteristic lengths) from the measured effective properties and the material open porosity. The procedure is applied to four different sound absorbing materials and results of the characterization are compared with existing direct and inverse methods. Predictions of the acoustic behavior using an equivalent fluid model and the found non-acoustic properties are in good agreement with impedance tube measurements.     

Sorption study of an anionic dye - benzopurpurine 4B - on calcined and uncalcined Mg-Al layered double hydroxides

In this paper, the elimination from aqueous solution of the pollutant benzopurpurine 4B by Mg-Al-CO₃ hydrotalcite and its modified form Mg-Al-500 has been studied. Mg-Al-CO₃²⁻ layered double hydroxide with an Mg/Al molar ratio of 2.0 was synthesized by the co-precipitation method, and its modification was carried out by calcination. The affinity of these materials with a mixture of benzopurpurine 4B was studied as a function of dye-adsorbent contact time, initial pH of the solution, initial dye concentration and temperature. The results indicate that HDLs were effective in removing benzopurpurine 4B anionic dye. Their saturated adsorption capacities are very high, particularly for the calcined material Mg-Al-500 compared to the standard one Mg-Al-CO₃²⁻.The characterisation of the solid Mg-Al-500, both fresh and after removal of the dye by X-ray diffraction and infrared spectroscopy, shows that the benzopurpurine 4B adsorption on this calcined phase is enhanced by reconstruction of a matrix hydrotalcite intercalated by the dye, with basal spacing of 23.77 Å, which is larger than that of Mg-Al-CO₃²⁻ LDHs (7.57 Å).     

Theoretical study of the polarized infrared spectra of the hydrogen bond in 2‐furoic acid crystal dimer

This work presents a theoretical simulation of ν_{O? H} and ν_{O? D} band shapes in the polarized infrared spectra of 2‐furoic acid dimer crystals measured at liquid‐nitrogen temperature. The line shapes are studied theoretically within the framework of the anharmonic couplings between low‐frequency hydrogen‐bond vibrations and degenerate excited states of high‐frequency hydrogen vibrations in hydrogen‐bonded dimers and the anharmonic coupling between the first excited state of the fast mode and the harmonics or band combinations of some low‐frequency bending modes, which lead to Fermi resonances.This approach takes into account the adiabatic approximation, the intrinsic anharmonicity of the low‐frequency mode through a Morse potential, Davydov coupling triggered by resonance exchange between the excited states of the fast modes of the two hydrogen bonds involved in the cyclic dimer, and the direct and indirect damping of the fast‐stretching modes of the hydrogen bonds and of the bending modes. The infrared spectral density was calculated within the linear response theory by Fourier transform of the autocorrelation function of the transition dipole moment operator of the fast mode. Numerical results show that mixing of all these effects allows satisfactory reproduction of the main features of the experimental IR line shapes of crystalline H‐ and D‐bonded 2‐furoic acid at liquid‐nitrogen temperature and for different polarizations. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

Cathodic reduction of diazonium salts in aprotic medium

Cathodic reduction of diazonium salts in acetonitrile led to the formation of azobenzenes, in good to moderate yields, and diarylamines as minoritary products. The reactions were carried out at the second reduction potential of the diazonium salts, involving aryl anions in the formation of the products.     

A generalized collapsing sandpile model

In this paper, we introduce a new model for the collapsing sandpile and we prove existence and uniqueness of a solution for the corresponding initial value problem. Moreover, we prove the convergence of the time-stepping approximation of the solution. We use subgradient flows for variational problems with time dependent gradient constraints. These gradient constraints are interpreted as the critical angles of the sandpile. In particular, our model produces an evolution in time of avalanches in a drying of a sandpile, rather than instantaneous collapse.     

Aurasperone F--a new member of the naphtho-gamma-pyrone class isolated from a cultured microfungus, Aspergillus niger C-433

A novel dimeric naphtho-gamma-pyrone, named aurasperone F (1), was isolated from the fermentation broth of the culture extracts of Aspergillus niger C-433, isolated from grapes, along with the known compounds fonsecin (2), aurasperone B (3), aurasperone C (4), aurasperone D (5) and aurasperone E (6). The chemical structure of the new natural product was established by extensive one- and two-dimensional NMR spectroscopic studies (1H, 13C, COSY, HMQC, 1D NOE spectra), as well as on the UV, MS and IR spectral analysis.     

Dynamic kinetic transformation of sulfinyl chlorides: synthesis of enantiomerically pure C(2)-symmetric bis-sulfoxides.

Two modular and highly convergent approaches for the synthesis of both isomers of a large number of optically pure C(2)-symmetric bis-sulfoxides have been developed, and their scope and limitations have been assessed. The first one uses as intermediate diastereomerically pure C(2)-symmetric bis-sulfinate esters 6(S(S),S(S)) and 6(R(S),R(S)), obtained by dynamic kinetic resolution of ethane-1,2-bis-sulfinyl chloride 5. A single inducer of chirality, the glucose-derived DAG (diacetone-D-glucose) 1 is used for the enantioselective synthesis of both diastereomerically pure C(2)-symmetric bis-sulfinate esters, thanks to the opposite stereodirecting effect of pyridine and (i)Pr(2)NEt used to catalyze the reaction. The second approach is based on the copper-catalyzed oxidative coupling of optically pure lithiomethyl sulfoxides. Both isomers of a large number of methyl sulfoxides can be obtained in a convergent manner using (R(S))- and (S(S))-DAG methanesulfinate esters 8R(S) and 8S(S). Methanesulfinates 8R(S) and 8S(S) are also obtained in an enantioselective way by a dynamic kinetic resolution of methane sulfinyl chloride 24. The final bis-sulfoxides are obtained with enhanced enantioselectivities compared to the corresponding monomers, as a result of the Horeau effect which is operating in both approaches. A model based on the formation of pentacoordinated sulfur intermediate is proposed. This model can explain the dynamic kinetic resolution observed via Berry pseudorotations, without the commonly accepted in situ racemization of the starting material. The usefulness of the approaches is demonstrated by the preparation of complexes of Pd(II) and Ru(II) bearing bidentated chiral sulfoxides as ligands.     

Activated sulfahydantoin as Boc-glycine enolate equivalent: highly diastereoselective α-hydroxyalkylation and application to the synthesis of aldopentonate analogues

N-Boc-activated sulfahydantoin can be seen as glycine enolate equivalent. It appeared as a convenient starting material for the stereocontrolled preparation of threonine homologues through an alkaline syn aldolization involving a Boc migration. The methodology allowed the one-pot preparation of constrained analogues of polyoxamic acid.     

Ultrasound-promoted aromatic nucleophilic substitution of dichlorobenzene iron(II) complexes

The nucleophilic aromatic substitution under ultrasound irradiation of a dichlorobenzene iron η⁶-complex with various secondary amines is reported. The reaction time at moderate temperatures is considerably shortened (15 min) compared to non sonicated reaction conditions at room temperature (several days) or at solvent refluxing temperature (12-48 h). Controlled mono- or di-substitution was achieved by the tuning of the amine nucleophilicity and the solvent polarity. The method was successfully applied to the synthesis of differently substituted phenylenediamines.