Electrochemical Characteristics of a Triphenylamine Derivative by Microelectrode Voltammetry

With the objective of understanding the kinetic redox properties of triphenylamine derivatives in association with chemical reactions, for their future application in functional organic semiconductor devices, the electrochemical characteristics of 4‐(2,2‐diphenylethenyl)‐N,N‐bis(4‐methylphenyl)‐benzenamine (TPA) were evaluated. Based on cyclic voltammograms of TPA on Pt disk electrodes with diameters of 300 μm and 10 μm at slow and fast scan rates in an acetonitrile solution, the TPA^.+ is stable, while the TPA²⁺ is unstable. Importantly, the unstable TPA²⁺ appears to break down by a subsequent chemical reaction. A Cottrell plot analysis from chronoamperometry of a solution containing TPA reveals that both the first and second oxidations are one‐electron reactions. Concerning the stabilization mechanism of the first oxidation state of TPA, the results of molecular orbital calculations indicate that the electrons of the HOMO level are distributed in the triphenylamine group, which induces a resonance‐stabilized TPA^.+. Based on these results, TPA/TPA^.+ is suggested to have a sufficient stability for further application in organic semiconductor devices.     

Rhodium-Catalyzed ortho-Bromination of O-Phenyl Carbamates Accelerated by a Secondary Amide-Pendant Cyclopentadienyl Ligand

It has been established that a newly developed cyclopentadienyl rhodium(III) [Cp^ARh^III] complex, bearing an acidic secondary amide moiety on the Cp ring, is able to catalyze the ortho-bromination of O-phenyl carbamates with N-bromosuccinimide (NBS) at room temperature. The presence of the acidic secondary amide moiety on the Cp^A ligand accelerates the bromination by the hydrogen bond between the acidic NH group of the Cp^A ligand and the carbonyl group of NBS.     

Synthesis of Functionalized 1-Alkenylboronates via Hydroboration-Dealkylation of Alkynes with Diisopinocampheylborane

Hydroborations of propargyl chloride, ethyl propiolate, 3-trimethylsilyloxy-1-butyne, 1,1-diethoxy-2-propyne, 1-iodo- and 1-bromo-1-hexyne, and 1-bromo-3-chloro-1-propyne with diisopinocampheylborane 1, followed by dealkylation of the isopinocampheyl groups with acetaldehyde provide the corresponding 1-alkenylboronates in high yields with high regioselectivity.     

Heat-Resistant Polymer-Grafted Carbon Black: Grafting of Poly(Organophosphazenes) onto Carbon Black Surface

Abstract

The grafting of poly(organophosphazenes) onto carbon black surface by the reaction of poly(dichlorophosphazene) (PDCP) with carbon black having sodium phenoxide groups was investigated. PDCP was prepared by the ring-opening polymerization of hexachlorocyclotriphos-phazene in solution using sulfamic acid as a catalyst. The introduction of sodium phenoxide groups onto carbon black was achieved by treatment of phenolic hydroxyl groups on the surface with sodium hydroxide in methanol. Poly(diphenoxyphosphazene) (PDPP) was successfully grafted onto carbon black by the reaction of PDCP with sodium phenoxide groups introduced onto the surface followed by the replacement of chlorine atoms in PDCP with phenoxy groups. The percentage of grafting onto carbon black increased to 206% at 30°C after 12 h. It was found that only 1.4% of sodium phenoxide groups on carbon black surface was used for the grafting of PDCP because of the blocking of the surface by grafted polymer chains. Poly(diaminophenylphosphazene) and poly-(diethoxyphosphazene) were also grafted onto carbon black surface by the treatment of PDCP-grafted carbon black with aniline and sodium ethoxide, respectively. Poly(organophosphazenes)-grafted carbon blacks produced stable colloidal dispersions in good solvents for grafted polymers. Furthermore, thermogravimetric analysis indicated that poly-(organophosphazenes)-grafted carbon blacks were stable in air about 300°C.     

Grafting of Polymers Having Pendant Peroxycarbonate Groups Onto Carbon Black and Postpolymerization of Vinyl Monomers

Abstract

Postpolymerization of vinyl monomers initiated by pendant peroxycarbonate groups of grafted polymer chains on carbon black (CB) was investigated. The grafting of polymers having pendant peroxycarbonate groups onto CB was achieved by the trapping of polymer radicals formed by the thermal decomposition of copolymers of t-butylperoxy-2-methacryloyloxyethyl-carbonate (HEPO) with vinyl monomers such as vinyl acetate (VAc), styrene (St) and methyl methacrylate (MMA). The copolymers having pendant peroxycarbonate groups were prepared by copolym-erization of HEPO with vinyl monomers using azo initiator under irradiation of UV light at room temperature. The amount of remaining pendant peroxycarbonate groups of the poly(VAc-co-HEPO)-grafted CB obtained from the reaction at 90°C was maximum and decreased above the temperature. Furthermore, the postpolymerization of vinyl monomers, such as St, MMA, and VAc was initiated in the presence of poly(VAc-co-HEPO)-grafted and poly(St-co-HEPO)-grafted CB and the corresponding polymers were postgrafted onto CB to give branched polymer-grafted CB. The percentage of poly(St)-postgrafting (proportion of post-grafted poly(St) to poly(MMA-co-HEPO)-grafted CB used) increased with increasing polymerization time, but became constant at 20% after 4 hours.     

Transportation of a microdroplet on an oriented liquid crystal surface

Wetting phenomena play important roles in several technological applications and in many physical and biological thin‐film phenomena, such as wetting, adhesion and friction. One of key issues of these studies is to control the surface energy (or wettability) dynamically for liquid transportation. We have developed a liquid crystal (LC) surface for use as a transport substrate since we expected that the surface energy of an LC surface can be controlled rapidly using an electric field. The rapid control of the polarisability (or wettability) of a liquid crystalline surface by an electric field has been demonstrated, together with the transportation of a liquid microdroplet.     

Preparation of various Janus composite particles with two components differently combined

Janus composite particles with a combination of organic and inorganic substances were synthesized by soap-free emulsion polymerization in which an amphoteric initiator of 2,2′-azobis[N-(2-carboxyethyl)-2-2-methylpropionamidine] (VA-057) was employed to introduce a polystyrene (PSt) lobe onto silica cores surface-modified with 3-methacryloxypropyltrimethoxy silane (MPTMS). Thermogravimetric analysis and X-ray photoelectron spectroscopy were used to characterize the surface-modified silica particles and showed that a small amount of MPTMS introduced onto the surface of silica particles could successfully prepare SiO₂–PSt Janus particles. The oxide part of SiO₂–PSt Janus particles obtained with the polymerization was further surface-modified with 3-aminopropyltriethoxysilane (APS) to introduce positively charged amino groups on the silica surface. The silica surface modified with APS was covered with gold by electroless deposition in which a gold precursor of auric chloride was reduced with ascorbic acid in the presence of polyvinylpyrrolidone. The electroless deposition of gold successfully produced Janus particles with a combination of gold and PSt surfaces. Furthermore, dissolution of the polymer component of the Au–PSt Janus particles in tetrahydrofuran led to another Janus type of particles with an inorganic combination of Au and SiO₂.     

Rational Design for Cooperative Recognition of Specific Nucleobases Using β‐Cyclodextrin‐Modified DNAs and Fluorescent Ligands on DNA and RNA Scaffolds

We propose a binary fluorimetric method for DNA and RNA analysis by the combined use of two probes rationally designed to work cooperatively. One probe is an oligonucleotide (ODN) conjugate bearing a β‐cyclodextrin (β‐CyD). The other probe is a small reporter ligand, which comprises linked molecules of a nucleobase‐specific heterocycle and an environment‐sensitive fluorophore. The heterocycle of the reporter ligand recognizes a single nucleobase displayed in a gap on the target labeled with the conjugate and, at the same time, the fluorophore moiety forms a luminous inclusion complex with nearby β‐CyD. Three reporter ligands, MNDS (naphthyridine–dansyl linked ligand), MNDB (naphthyridine–DBD), and DPDB (pyridine–DBD), were used for DNA and RNA probing with 3′‐end or 5′‐end modified β‐CyD – ODN conjugates. For the DNA target, the β‐CyD tethered to the 3′‐end of the ODN facing into the gap interacted with the fluorophore sticking out into the major groove of the gap site ( MNDS and DPDB ). Meanwhile the β‐CyD on the 5′‐end of the ODN interacted with the fluorophore in the minor groove ( MNDB and DPDB ). The results obtained by this study could be a guideline for the design of binary DNA/RNA probe systems based on controlling the proximity of functional molecules.     

Development of continuous process enabling nanofibrillation of pulp and melt compounding

Microfibrillated cellulose (MFC), a mechanically fibrillated pulp mostly consisting of nanofibrils, is a very attractive material because of its high elastic modulus and strength. Although much research has been done on composites of MFC and polypropylene (PP), it has been difficult to produce such composites at an industrial level because of the difficulties in using MFC in such composites are not only connected to the polarity (that can be improved with compatibilizers), but also with the challenge to make a homogeneous blend of the components, and also the low temperature stability of cellulose that could cause problems during processing. We developed a new processing method which enables continuous microfibrillation of pulp and its melt compounding with PP. Never-dried kraft pulp and powdered PP were used as raw materials to obtain MFC by kneading via a twin-screw extruder. Scanning electron microscopy showed nano to submicron wide fibers entangled in the powdered PP. MFC did not aggregate during the melt compounding process, during which the water content was evaporated. Maleic anhydride polypropylene (MAPP) was used as a compatibilizer to reinforce interfacial adhesion between the polar hydroxyl groups of MFC and non-polar PP. We investigated the effect of MAPP content on the mechanical properties of the composite, which were drastically improved by MAPP addition. Needle-leaf unbleached kraft pulp (NUKP)-derived MFC composites had better mechanical properties than needle-leaf bleached kraft pulp (NBKP)-derived MFC composites. Injection molded NUKP-derived MFC composites had good mechanical and thermal properties. The tensile modulus of 50 wt% MFC composite was two times, and the tensile strength 1.5 times higher than that of neat PP. The heat distortion temperature of 50 wt% MFC content composite under 1.82 MPa flexural load was increased by 53 °C, from 69 to 122 °C. This newly developed continuous process using powder resin has the potential for application at an industrial level.