Nitridation under ammonia of high surface area vanadium aerogels

Vanadium pentoxide gels have been obtained from decavanadic acid prepared by ion exchange on a resin from ammonium metavanadate solution. The progressive removal of water by solvent exchange in supercritical conditions led to the formation of high surface area V₂O₅, 1.6H₂O aerogels. Heat treatment under ammonia has been performed on these aerogels in the 450-900 °C temperature range. The oxide precursors and oxynitrides have been characterized by XRD, SEM, TGA, BET. Nitridation leads to divided oxynitride powders in which the fibrous structure of the aerogel is maintained. The use of both very low heating rates and high surface area aerogel precursors allows a higher rate and a lower threshold of nitridation than those reported in previous works. By adjusting the nitridation temperature, it has been possible to prepare oxynitrides with various nitrogen enrichment and vanadium valency states. Whatever the V(O,N) composition, the oxidation of the oxynitrides in air starts between 250 and 300 °C. This determines their potential use as chemical gas sensors at a maximum working temperature of 250 °C.     

End-to-end single cyanato and thiocyanato bridged Cu(II) polymers with a new tridentate Schiff base ligand: crystal structure and magnetic properties

A new tridentate Schiff base ligand HL (L = C14H19N2O), derived from the condensation of benzoylacetone and 2-dimethylaminoethylamine in a 1:1 ratio, reacts with copper(ii) acetate and cyanate, thiocyanate or azide, to give rise to several end-to-end polymeric complexes of formulae [CuL(mu(1,3)-NCO)]n 1, [CuL(mu(1,3)-NCS)]n 2 and the complex 3 has two crystallographically independent units of formula [CuL(N3)] in the asymmetric unit cell. Complex 3 exists in dimeric form rather than as a polymeric chain. Compound 1 is the first report of a singly end-to-end cyanate bridged polymeric chain of Cu(II) with a Schiff base as a co-ligand. There are many examples of double NCS bridged polymeric chains, but fewer singly bridged ones such as compound 2. We have characterized these complexes by analytical, spectroscopic, structural and variable temperature magnetic susceptibility measurements. The coordination geometry around the Cu(II) centers is distorted square pyramidal for 1 and 2 and square planar for complex 3. The magnetic susceptibility data show slight antiferromagnetic coupling for the polymers having J values -0.19 and -0.57 cm(-1) for complexes 1 and 2 respectively. The low values of J are consistent with the equatorial-axial disposition of the bridges in the polymers.     

Kinetic Spectrophotometric Determination of Ritodrine Hydrochloride in Dosage Forms

A simple and sensitive kinetic method was developed for the determination of ritodrine hydrochloride in pharmaceutical preparations. The method is based upon a kinetic investigation of the oxidation reaction of the drug with alkaline potassium permenganate at room temperature for a fixed 12.5 min; the absorbance of the colored permenganate ion was measured at 609 nm. The absorbance concentration plots were rectilinear over the range of 1.6–11.2 μg mL^?1 (r = 0.9992) with a minimum detectability of 0.096 μgmL^?1 (2.88 × 10^?7 M). The different experimental parameters affecting the development and stability of color were carefully studied and optimized. The determination of ritodrine hydrochloride by the fixed concentration and rate constant methods is also feasible with the calibration equations obtained, but the fixed time method has been found to be more applicable. The proposed method was applied successfully to the determination of ritodrine hydrochloride in tablets and ampoules with average recoveries of 100.37 ± 0.93% and 100.42 ± 0.87%, respectively. The results obtained were in good agreement with those obtained using a reference method for comparison. A proposal of the reaction pathway is also presented.     

2-Amino-1-cyan-glutaconsäureamid-1-methylester,ein Dimeres des Cyanessigesters und Cyanacetamid

Synthesis of methyl 3-amino-4-carbomyl-2-cyano-2-butenoate is described and2 a classified as a dimer of methyl cyanoacetate and cyanoacetamide. By ammonolysis of the dimer of methyl cyanoacetate with dimethylamine and anilines, resp. the dimethylamide and anilides, resp. (2 b and3 a–j) are obtained. Condensation with salicylaldehyde to the pyrone derivative4 proves the structure of2 a, ring closure reactions in basic or acidic medium yield the pyridones6 a and7 a,b, coupling with diazonium salts the pyridazines8 a–d. The amides2 and the anilides3 show hindered rotation of the enamino- and the amide-group by hydrogen bonds between the nitrogen functions and the ester carbonyl (Z-form). The G values are reported.

     

The unexpected rearrangement of 1,5‐benzodiazepin‐2,4‐dione to a benzimidazol‐2‐one derivative during N,N'‐diglucosylation

Reaction of 1,5‐benzodiazepin‐2,4‐dione with 3‐O‐substituted‐5,6‐anhydro‐1,2‐isopropylidene‐α‐D‐glucofuranose gave the unexpected N,N'‐di‐glucofuranosyl benzimidazol‐2‐one by a novel rearrangement and ring closure reaction. A mechanism is proposed.     

THE REACTIVITY OF CITRONELLOL and α-THUJENE WITH SINGLET OXYGEN. RATE CONSTANTS OF CHEMICAL REACTION and PHYSICAL QUENCHING*

The quantum yields of Rose Bengal sensitized photooxidation of citronellol and α-thujene have been determined as a function of added acceptor and compared with those of furfuryl alcohol as a standard. The results permitted the calculation of the corresponding rate constants of chemical reaction (k_T) and physical quenching (K_q) of singlet oxygen. The sum (k_T+ k_q) has been verified independently by a Stern-Volmer analysis of the singlet oxygen luminescence quenching. α-Thujene reacts faster with singlet oxygen than citronellol, physical quenching being negligible in both cases.     

Novel Cyanine Dyes: Synthesis,Characterization and Photosensitization‐Structure Correlation

Novel furo, thieno and pyrrolo[2,3‐b]pyrazole cyanine dyes were synthesized. The structure‐photosensitization properties correlation of the dyes were examined in 95% ethanol solution by absorption spectroscopy. The chemical structure of the starting biheterocyclic compounds and their derived cyanine dyes were confirmed by elemental analysis, IR and ¹H NMR spectroscopy.     

Substitution of phosphine in the complex [RhCl(cyclooctadiene)(phosphine)] by 1-hexene

Summary The substitution of phosphine in the [RhCl(COD)(phosphine)] complex (1), where phosphine is PPh₃ or 1/2 BPS-2 [bis(diphenylphosphinoethyl)tetramethyldisiloxane] and COD is cycloocta-1,5-diene, by 1-hexene is a two-step reversible reaction. All individual rate constants and equilibrium constants were determined spectrophotometrically and associative mechanism occurring via the formation of five-coordinated [RhCl(COD)(phosphine)(1-hexene)] (2) was inferred. The rate-determining step changes from the first- to the second-one as the concentration of 1-hexene increases. An excess of phosphine shifts the equilibrium towards complex (2).     

Ni+Pd+Ga and Ni+Pd+in liquid alloys: Enthalpies of formation

In order to fill the evident gap in the thermodynamic data of nickel-palladium-gallium and nickel-palladium-indium ternary alloys, the enthalpies of formation of these systems in the liquid state have been determined. This was achieved by means of a very high temperature calorimeter (T<1800 K), using the direct drop method, and based on analogous measurements of the respective binary alloys previously published. Complete automation of the calorimeter led to a good precision even at the highest temperatures. The enthalpies of formation of the ternary liquid alloys were measured between 1400 and 1600 K on the whole composition range. As in the limiting binary systems, enthalpies of formation are negative and non temperature dependent at any composition.

---

Zusammenfassung Um die Lücke hinsichtlich thermodynamischer Daten von Nickel-Palladium-Gallium und Nickel-Palladium-Indium Legierungen zu füllen, wurden die Bildungsenthalpien dieser ternÄren Systeme im flüssigen Zustand bestimmt. Dies erfolgte mittels eines Kalorimeters für sehr hohe Temperaturen (T<1800 K), unter Verwendung der direkten Einwurfmethode auf der Basis früher veröffentlichter Messungen an den entsprechenden binÄren Systemen. Die Bildungsenthalpien der flüssigen ternÄren Legierungen wurden zwischen 1400 und 1600 K über den gesamten Zusammensetzungsbereich bestimmt. VollstÄndige Automation des Kalorimeters bewirkte hohe PrÄzision selbst bei den höchsten Temperaturen. Wie in den begrenzenden binÄren Systemen sind die Bildungsenthalpien negativ und bei allen Zusammensetzungen nicht temperaturabhÄngig.

     

Kinetics of the adsorption of polystyrene macromolecules from dilute solutions in methyl ethyl ketone on carbon black

The kinetics of the adsorption of a mixture of three polystyrenes (the weight-average molecular weight M _w = 8300, 34000, and 195000) on nonporous carbon (carbon black pretreated in the argon flow at 3800 K) from dilute solutions in methyl ethyl ketone at 298 K is studied. The kinetic dependences of the adsorption of polystyrenes on carbon black nanoparticles from solutions in methyl ethyl ketone are described by adsorption kinetics equations previously used for describing the adsorption of aromatic hydrocarbons from aqueous solutions by active carbon. The correlation between the kinetic coefficients and the molecular weights of polystyrenes is discussed.