Synthesis of 5-Substituted 1,3-Dimethylpyrazolo[4,3-e][1,2,4]triazines

A novel method for the synthesis of a new series of 5-substituted 1,3-dimethyl pyrazolo[4,3-e][1,2,4]triazines is described. The new synthetic strategy is based on the classical Bischler 1,2,4-benzotriazine synthesis. This approach involves the preparation of 5-hydrazinopyrazole from 5-chloro-1,3-dimethyl-4-nitropyrazole followed by acylation and nitro group reduction to form the corresponding 4-amino-3-(acylhydrazino)pyrazoles. Intramolecular oxidative cyclization of the latter derivatives, using polyphosphoric acid, produced the respective target pyrazolotriazines.     

Isotope shift studies in the spectra of Gadolinium in UV region and term shifts of high even levels of Gd I

Isotope shift Δσ(¹⁵⁶Gd?¹⁶⁰Gd) is reported in 70 spectral lines of neutral gadolinium atom (Gd I) in the 3290- 3920 Å region providing isotope shift data in UV lines of Gd I spectrum for the first time. The measurements were carried out on a photoelectric recording Fabry-Perot Spectrometer using highly enriched isotopic samples of gadolinium. Term isotope shifts ΔT(¹⁵⁶Gd?¹⁶⁰Gd) have been evaluated for 48 high lying even parity energy levels of Gd I using this data; new ΔT values have been obtained for 24 levels. Electronic configurations 4f⁷5d6s6p, 4ff⁷5df²6p and 4f⁸5d6s assigned earlier to these even levels have been either confirmed or configuration mixing pointed out in some of these levels. Probable assignment of 4f⁸5d6s configuration to 8 even levels between 32 930 and 35 500 cm^-1 have been confirmed.     

Characteristic absolute efficiency response curves of a high purity germanium detector in the energy range 50–1500 keV

The characteristic absolute efficiency response curves of a high purity germanium detector (HPGe) for different counting geometries have been established in the energy range 50–1500 keV by measuring the absolute efficiencies using both mono-energetic and multi-gamma emitting radionuclide point calibrated sources supplied by IAEA. Several fitting functions proposed in the literature were assessed for interpolation within the intermediate energy range of interest. The values of the function parameters have been determined by using the linear least square methods. The problems associated with the measurements of experimental efficiency data at small source–detector distances and the importance of the correlation matrix in the estimation of precise uncertainties have been shown. It was found that the inclusion of correlation matrices in the propagation of error formulae plays a significant role up to 450 keV gamma-ray energy and results in a drastic reduction of errors associated with the predicted efficiencies. The discrepancy at closer counting geometries in the absence of true gamma-gamma coincidence corrections is found to reach to about 30%.     

Novel aromatic polyimides derived from benzofuro[2,3-b]benzofuran-2,3,8,9-tetracarboxylic dianhydride (BBTDA)

Benzofuro[2,3-b]benzofuran-2,3,8,9-tetracarboxylic dianhydride (BBTDA) is introduced as a monomer for the synthesis of a series of novel polyimides with enhanced high thermal stability. Polyimides derived from BBTDA and aromatic diamines showed high glass transition (T_g>296 °C) and degradation (T₅>455 °C) temperatures, and were soluble in organic solvents (i.e. N-methyl pyrrolidone (NMP), N,N^′-dimethylformamide (DMF), N,N^′-dimethylacetamide (DMAc)). The polymerization yielded high-molecular-weight polyimides with inherent viscosities ranging from 1.75 to 2.14 dl/g. The polymers were characterized by IR and elemental analysis.     

Spectrophotometric determination ofo- andp-phenylenediamines

Summary Cupric chloride-triphenylphosphine complex gives red color witho-phenylenediamine having maximum absorption at 505–520 nm and 0.5g/ml as visual limit of identification. The reaction is specific foro-phenylenediamine and obeys Beer's law (1 to 10g/ml). This reaction provides the basis of a new method for the Spectrophotometric determination ofo-phenylenediamine ing quantities.Ruthenium trichloride-triphenylphosphine complex gives blue color withp-phenylenediamine having maximum absorption at 580 nm and 2g/ml as visual limit of identification. On the basis of this color reaction a Spectrophotometric method for the determination ofp-phenylenediamine in hair dyes is described. The recovery of the dye from commercial preparations is better than 97%. Other organic compounds do not interfere.

---

Zusammenfassung Kupfer(II)chlorid-triphenylphosphin reagiert mito-Phenylendiamin unter Rotfärbung mit maximaler Absorption bei 505 bis 520 nm und 0,5g/ml als Erfassungsgrenze. Die Reaktion ist für o-Phenylendiamin spezifisch und folgt dem Beerschen Gesetz zwischen 1 und 10g/ml. Sie dient als Grundlage für eine neue Methode der spektrophotometrischen Bestimmung von Mikrogrammengen o-Phenylendiamin.Rutheniumtrichlorid-triphenylphosphin reagiert mit p-Phenylendiamin unter Blaufärbung mit maximaler Absorption bei 580 nm und 2g/ml als Erfassungsgrenze. Auf dieser Grundlage läßt sich p-Phenylendiamin in Haarfärbemitteln bestimmen. In handelsüblichen Präparaten werden mehr als 97% des enthaltenen Farbstoffes gefunden. Andere Verbindungen stören nicht.

     

Viscoelasticity,mechanical properties,and in vivo biocompatibility of injectable polyvinyl alcohol/bioactive glass composite hydrogels as potential bone tissue scaffolds

Abstract

An injectable composite hydrogel composed of polyvinyl alcohol (PVA) and bioactive glass (BG) particles were synthesized by a physical crosslinking approach. The morphology, mechanical properties, and viscoelasticity of the PVA/BG composite hydrogel were characterized. Scanning electronic microscopy (SEM) showed uniform and homogeneous distribution of BG particles throughout the composite hydrogel. The incorporation of 2.5?wt% of BG particles in the composite hydrogel formulations, enhanced the static compressive strength and static elastic modulus by 325% and 150%, respectively. The storage molds (G′) was greater than the loss modules (G′′) at all the frequency range studied, which revealed a self-standing elastic composite hydrogel with a smooth injectability. The PVA/BG composite hydrogel was also implanted subcutaneously in the dorsal region of adult male rats. After 4?weeks of implantation, no inflammatory cells were seen within and around the implant, which indicated that the composite hydrogel was biocompatible. The properties of the synthesized injectable PVA/BG composite hydrogel demonstrate its capability toward bone regeneration.     

Semiquantitative determination of aromatic andα,β-unsaturated aldehydes by circular thin-layer chromatography

Summary A method for semiquantitative determination of aromatic and,-unsaturated aldehydes such as salicylaldehyde, anisaldehyde, vanillin, veratraldehyde, piperonal, cinnamaldehyde, furfural andp-dimethylaminobenzaldehyde by making circular spots of their isonicotinoyl hydrazones on chromatoplates with circular thin-layer Chromatographic apparatus and their comparison with sensitivity standards has been described. The accuracy is ± 5% and the method is rapid, simple and economical.

---

Zusammenfassung Ein Verfahren zur semiquantitativen Bestimmung aromatischer und,-ungesättigter Aldehyde wie Salioylaldehyd, Anisaldehyd, Vanillin, Veratrumaldehyd, Piperonal, Zimtaldehyd, Furfural und p-Dimethylaminobenzaldehyd durch Dünnschicht-Ringchromatographie ihrer Isonikotinsäurehydrazone und Vergleich mit Standardchromatogrammen wurde beschrieben. Die Genauigkeit beträgt ±5%.

     

Effects of mixed H2O‐CH3CN solvents on the rate of hydrazinolysis of N‐phenylphthalimide: Spectral and kinetic evidence for the occurrence of N‐aminophthalimide on the reaction path

Kinetic study on the cleavage of N‐phenylphthalimide (NPhPT) in the presence of 0.05 M NH₂NH₂ and mixed H₂O‐CH₃CN solvents reveals the occurrence of reaction scheme where A, B, C, C₁, An, E, and F represent NPhPT, o‐CO^?₂C₆H₄CONHC₆H₅, o‐CONHNH₂C₆H₄‐ CONHC₆H₅, N‐aminophthalimide, aniline, o‐CO^?₂C₆H₄CONHNH₂, and o‐CONHNH₂C₆H₄‐CONHNH₂, respectively. But, in the presence of either nonbuffered ?0.20 M NH₂NH₂ hydrazine buffer of pH ～7.30–8.26 with total buffer concentration ([Buf]_T) of >0.02 M, further conversion of F to 2,3‐dihydrophthalazine‐1,4‐dione (DHPD) has been detected depending upon the length of the reaction time (t), the values of [Buf]_T, and pH. It has been shown that the rate of conversion of C₁ to F is much faster than that of C to C₁ which is much faster than that of F to DHPD. The reaction step A → C involves general base (GB) catalysis, while step C → C₁ seems to involve specific base–general acid (GA) and GB‐GB catalysis. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 37: 147–161, 2005     

Synthesis and Characterization of Novel Monoazo N‐Ester‐1,8‐Naphthalimide Disperse Dyestuffs

Five novel monoazo disperse dyestuffs based on N‐ester‐1,8‐naphthalimide were synthesized. Acenaphthene was nitrated, then oxidized to 4‐nitro‐1,8‐naphthalic anhydride. 4‐Nitro‐1,8‐naphthalic anhydride was reacted with methyl and ethyl glycinate in alcoholic media, followed with reduction. 4‐Amino‐N‐methyl and ethyl glycinate‐1,8‐naphthalimide were obtained. These products were diazotized and coupled with appropriate aromatic amines to give bluish‐red or violet dyestuffs. All intermediates and dyestuffs were purified and characterized by ¹H‐NMR, FTIR, DSC, UV‐VIS and Elemental Analysis. Dispersion of dyestuffs was prepared in water and applied to polyester fabrics. The dyed fabrics showed that four of the synthesized dyestuffs were suitable for coloring polyester fibers, producing deep bluish red with very good build up properties.     

Aromatic polyether, -ketone, -sulfones as laminating resins. XII. Derivatives of 2,2′-diphenylethynyldiphenyl which cure by an intramolecular cyclization

Polymers made from 2,2′-diiododiphenyl-4,4′-dicarbonyl dichloride, diphenyl ether, and isophthaloyl chloride have been made and converted to the 2,2′-diphenylethynyl derivatives. Introduction of units of isophthaloyl chloride reduced the melting point of these polymers to about 200°C, and they could then be cured by heating. A good glass laminate was prepared and cured from one of the polymers.