Studies on Diels–Alder thermoresponsive networks based on ether–urethane bismaleimide functionalized poly(vinyl alcohol)

Thermoreversible networks obtained by the Diels–Alder cycloaddition reaction of poly(vinyl furfural) with urethane bismaleimides containing polyether chain were synthesized. The formation of the networks was confirmed by attenuated total reflectance in conjunction with Fourier transform infrared spectroscopy (ATR–FTIR). The materials thermal properties were investigated using differential scanning calorimetry (DSC) and a coupling of dynamic thermogravimetry with Fourier transform infrared spectroscopy and mass spectrometry (TG–FTIR–MS) for pyrolysis behaviour under nitrogen atmosphere. A thermal decomposition mechanism of the networks and poly(vinyl furfural) was discussed via evolved gas analysis. The thermoreversibility of the networks was demonstrated by the presence of the endothermic peak characteristic to the retrodienic process on the DSC heating curves and also the appearance of the exothermic peak, due to the dienic process, on the DSC cooling curve. The dynamic contact angle and free surface energy values of the networks were determined. Measures of the heterogeneity and roughness of the surfaces suggested that the surfaces of the networks’ films are more homogenous than the initial poly(vinyl furfural) surface. Dynamic water vapour sorption studies were conducted.     

Thermomechanical transitions in doubly-clamped micro-oscillators

The small size and low damping of MEMS oscillators give rise to phenomena that are not observed routinely at the macroscopic scale. In this work we document and explain an experimentally observed transition in the response of a doubly clamped micromechanical oscillator with pretension. The transition from softening to hardening is repeatedly observed upon increasing the power of an incident sensing laser beam, a procedure routinely used to improve signal strength during optical detection of resonant motion of microstructures. At intermediate laser power, a novel resonant response that displays characteristics of both softening and hardening in the same sweep, is observed experimentally. Increased laser heating of a structure in tension may be expected to increase softening behavior. Using tools from non-linear dynamics and continuum mechanics, we show that the observed counter-intuitive behavior can be explained by a competition between the opposing responses of linear and non-linear stiffnesses to a change in temperature.     

METABOLICALLY CONVERTIBLE LIPOPHILIC DERIVATIVES OF pH-SENSITIVE AMPHIPATHIC PHOTOSENSITIZERS

Abstract We propose the use of acetoxymethyl esters of pH-sensitive amphipathic photosensitizers (PS) for photodynamic therapy (PDT). These compounds may be applicable for PDT involving endocytosis of lipophilic carriers leading to lysosomal uptakc of the esterified PS by target cells. Partial and/or total enzymatic de-esterification may result in the extralysosomal distribution of the photoactive agents, possibly culminating in a multisite photochemical response. We report here the synthesis and properties of chlorin e₆ triacetoxymethyl ester (CAME) and pheophorbide a acetoxymethyl ester (PAME). Chlorin e₆ and pheophorbide a are photocytotoxic chlorins that possess free carboxylate groups and exhibit optimum wavelengths of excitation substantially red shifted relative to hematoporphyrin derivative. Acetoxymethyl esterification of chlorin e₆ and pheophorbide a was accomplished with bromomethyl acetate. High-performance liquid chromatography allowed for the purification of PAME, in 87% purity, and CAME, in 63% yield and 94% purity, as well as the detection of the presumed mono- and diesters of chlorin e₆ as transient intermediates in the synthesis of CAME. The ultraviolet-visible absorption, fluorescence excitation and emission, NMR and mass spectra of the chlorin e₆ tnester are consistent with those expected for CAME. The pH-sensitive amphipathicity of pheophorbide a and chlorin e₆ but not CAME was demonstrated using a water/1-octanol partition assay. The production of pheophorbide a from PAME and the sequential formation of the di- and monoesters and free chlorin e₆ from CAME, by the action of lysosomal esterases obtained from cancer cells, demonstrate the potential of cellular enzymes to convert the lipophilic esters to pH-sensitive amphipathic PS. It is expected that the product of the esterases' action in the acidic lysosome will be hydrophobic and tend to diffuse into the organelle membrane. Contact with the neutral pH of the adjacent cytosol will result in conversion of the PS to a more hydrophilic anionic species, presumably allowing for it lo diffuse into that compartment and partition throughout the lipophilic and aqueous compartments of the cell.     

On irreducible p,q-representations of gl(2)

The theory of irreducible p,q-representations of the complex Lie algebra gl(2) is developed. We construct a one variable model of irreducible p,q-representations of gl(2) in terms of p,q-derivative operator, and derive a generating function based on it.     

Vertical distribution of <Superscript>210</Superscript>Pb and <Superscript>226</Superscript>Ra and their activity ratio in marine sediment core of the East Malaysia coastal waters

Marine sediment cores were collected from two stations at East Malaysia coastal waters on June 2004. Activity concentrations of ²¹⁰Pb in sediment core were ranged from 11 Bqkg⁻¹ to 84 Bqkg⁻¹ dry wt. for SR 01 and 4 Bqkg⁻¹ to 66 Bqkg⁻¹ dry wt. for SB 03. Meanwhile, activity concentrations of ²²⁶Ra in sediment core were varied significantly depending on the sampling location of SR 01 and SB 03 with ranged 17–26 Bqkg⁻¹ dry wt. and 8–11 Bqkg⁻¹ dry wt., respectively. The activity ratios of ²¹⁰Pb/²²⁶Ra were no significantly different at all sampling stations with an average of 1.78. Refer to the entire results; the activities of ²¹⁰Pb and ²²⁶Ra were higher at station SR 01 than station SB 03, but contrast with ratio of ²¹⁰Pb/²²⁶Ra. The reasons of different ²¹⁰Pb and ²²⁶Ra activity concentration and distribution of their ratios were strictly related to their half lives, environment origin, potential sources and behavior.     

Characteristics of formvar films used to prevent alpha-detector contamination

Alpha spectrometry is an extremely useful and sensitive for detection of alpha-emitting nuclides. Contamination of the silicon detectors for low-level alpha spectrometry by recoil nuclides is a serious problem in the measurement of alpha emitters decaying to daughter nuclides with short half-lives. This unwanted contamination leads to decreased measurement sensitivity causing a degradation of the limit of detection. The simplest method to prevent this radioactive contamination of detector is to use a catcher film between the alpha source and the detector. In this work we describe the obtaining of the thin formvar films as stopper foils for recoil nuclei and we investigated the influence of these films on alpha spectrometry parameters, as energy shift (~30 keV) and resolution (~7%). No significant deterioration of the alpha spectrometry parameters was observed when using thin formvar films. Using the ASTAR web databases, which calculate stopping powers for alpha particles, the thickness of formvar films was estimated to be about 5.355 × 10⁻⁵ g/cm². The measurements were performed with an ORTEC SOLOIST alpha spectrometer with PIPS detector.     

Facile synthesis and step by step enhancement of blue photoluminescence from Ag-doped ZnS quantum dots

Our results pertaining to the step by step enhancement of photoluminescence (PL) intensity from ZnS:Ag,Al quantum dots (QDs) are presented. Initially, these QDs were synthesized using a simple co-precipitation technique involving a surfactant, polyvinylpyrrolidone (PVP), in de-ionised water. It was observed that the blue PL originated from ZnS:Ag,Al QDs was considerably weak and not suitable for any practical display application. Upon UV (365 nm) photolysis, the PL intensity augmented to ~170% and attained a saturation value after ~100 min of exposure. This is attributed to the photo-corrosion mechanism exerted by high-flux UV light on ZnS:Ag,Al QDs. Auxiliary enhancement of PL intensity to 250% has been evidenced by subjecting the QDs to high temperatures (200 °C) and pressures (~120 bars) in a sulphur-rich atmosphere, which is due to the improvement in crystallanity of ZnS QDs. The origin of the bright-blue PL has been discussed. The results were supported by X-ray phase analysis, high-resolution electron microscopy and compositional evaluation.     

On irreducible p,q‐representations of Lie algebras \documentclass{article}\usepackage{amssymb}\begin{document}\pagestyle{empty}$\mathcal {G} (0,1)$\end{document} and \documentclass{article}\usepackage{amssymb}\begin{document}\pagestyle{empty}$\mathcal {G} (0,0)$\end{document}

In this paper, the irreducible p, q‐representations of the Lie algebras $\mathcal {G}(0,1)$ and $\mathcal {G}(0,0)$ are discussed. We prove two theorems that classify certain irreducible p, q‐representations of these Lie algebras and construct their one variable models in terms of p, q‐derivative and dilation operators. As an application, we derive a p, q‐special function identity based on one such model.     

Group Algebras Satisfying a Certain Lie Identity

ABSTRACT

Let K be a field of characteristic p ≠ 2 and let G be any group. A characterization of group algebras KG satisfying the Lie identity [[x,y],[u,v],[z,t]] = 0 for all x,y,u,v,z,t ? KG is obtained.