Intercalation of Cyclic Amines into α-Titanium Phosphate

The intercalation of some amines (aniline, benzylamine, cyclohexylamine,piperidine, pyridine, pyrazine and piperazine) into -titaniumphosphate, Ti(HPO₄)_2×H₂O,has been investigated by the batch method and/or by exposing the host to thevapour of the amines. The changes in the interlayer distance of the solidduring the intercalation process was followed by X-ray powder diffraction.The new intercalates were characterised by chemical and thermal analysis.Materials with a monolaminar and/or bilaminar arrangement of amine moleculesin the phosphate interlayer region are obtained depending on the nature ofthe amine. Due to steric hindrance, saturated phases are not obtained forall amines studied. The thermal decomposition of the intercalates (nitrogenatmosphere), takes place in three stages: dehydration, removal of amines andcondensation of the hydrogenphosphate to pyrophosphate groups.     

Coordination solids via assembly of adaptable components: systematic structural variation in alkaline earth organosulfonate networks

A family of alkaline earth organosulfonate coordination solids is reported. In contrast to more typical crystal engineering approaches, these solids are sustained by the assembly of building blocks that are coordinatively adaptable rather than rigid in their bonding preferences. The ligand, 4,5-dihydroxybenzene-1,3-disulfonate, L, progressively evolves from a 0D, 1D, 2D, to a 3D microporous network with the Group II cations Mg(2+), Ca(2+), Sr(2+), and Ba(2+), (compounds 1-4), respectively. This trend in dimensionality can be explained by considering factors such as hard-soft acid-base principles and cation radii, a rationalization which follows salient crystal engineering principles. The selective gas sorption properties of the microporous 3D network [Ba(L)(H(2)O)].H(2)O, 4, with different gaseous guests are also presented.     

Use of the internal standardization for difficult sampling by graphite furnace atomic absorption spectrometry

This work shows the potentiality of As as internal standard to compensate errors from sampling of sparkling drinking water samples in the determination of selenium by graphite furnace atomic absorption spectrometry. The mixture Pd(NO₃)₂/Mg(NO₃)₂ was used as chemical modifier. All samples and reference solutions were automatically spiked with 500 μg l⁻¹ As and 0.2% (v/v) HNO₃ by the autosampler, eliminating the need for manual dilutions. For 10 μl dispensed sample into the graphite tube, a good correlation (r=0.9996) was obtained between the ratio of analyte absorbance by the internal standard absorbance and the analyte concentrations. The relative standard deviations (R.S.D.) of measurements varied from 0.05 to 2% and from 1.9 to 5% (n=12) with and without internal standardization, respectively. The limit of detection (LD) based on integrated absorbance was 3.0 μg l⁻¹ Se. Recoveries in the 94-109% range for Se spiked samples were obtained. Internal standardization (IS) improved the repeatability of measurements and increased the lifetime of the graphite tube in ca. 15%.     

Quantitative determination of alpha(s2)- and alpha(s1)-casein in goat's milk with different genotypes by capillary electrophoresis

A capillary electrophoresis (CE) method has been applied for the quantitative determination of alpha(s1)- and alpha(s2)-CN in goat's milk. Several analytical parameters were evaluated showing the reliability of this CE method. Coefficients of determination (R2) greater than 99% were obtained and determination limits of 1.23 and 0.98 mg/ml were achieved for alpha(s1)- and alpha(s2)-CN, respectively. The analytical parameters studied in terms of accuracy, precision and recovery were within acceptable limits. Among 18 samples of 4 different genotypes (BB, EE, BF and FF) for alpha(s1)-CN were analysed, different amounts were obtained from the genotypes.     

Structural characterization and magnetic properties of sandwich-type tungstoarsenate complexes. Study of a mixed-valent VIV2/VV heteropolyanion

Complexes K11Na1[As2W18(Mn(H2O))3O66]x27H2O (1) and Na12[As2W18(Co(H2O))3O66]x34H2O (2) have been characterized. 1 crystallizes in the orthorhombic space group Pnma, with a = 30.6484(4) A, b = 14.9946(2) A, and c = 19.17080(10) A (Z = 4), while 2 crystallizes in the monoclinic space group C2/c, with a = 14.124(2) A, b = 23.294(3) A, c = 32.247(3) A, and beta = 98.935(10) degrees (Z = 4). Structures of the anions of 1 and 2 are similar, the divalent metals adopting a square pyramidal environment. K11[As2W18(VO)3O66]x23H2O (3) crystallizes in the orthorhombic space group Pnma, with a = 30.6240(5) A, b = 14.9861(2) A, and c = 19.2651(3) A (Z = 4). The structure has revealed a disorder on two of the three metals linking the [alpha-AsW9O33]9- parts. For these two vanadium atoms, the V=O bonds are directed alternatively toward the inside or the outside of the [alpha-AsW9O33]9- cavity. The remaining vanadium shows a V=O bond always directed toward the outside of the cavity. Titration of VIV by CeIV revealed that 3 is the mixed-valent VIV2VV species. Magnetic measurements are in agreement with this formulation. The high-temperature molar magnetic susceptibility of a powdered sample of 3 clearly confirms the presence of two d1 centers. The two VIV are antiferromagnetically coupled, with J = -2.9 cm-1 and g = 1.93. Crystallographic data do not permit the location of the two VIV to be distinguished from the location of the VV. As expected, the Mn(II) are very weakly antiferromagnetically coupled in compound 1. The complex Na8[Ni(H2O)6]2[As2W18(Ni(H2O))3O66]x20H2O (4) has been synthesized. The anion crystallized with two octahedral [Ni(H2O)6]2+ as counterions. Magnetic data have been fitted assuming that the only exchange-coupled centers are the nickels of the polyanion. 4 exhibits an antiferromagnetic coupling with J = -1.7 cm-1, g = 2.27, and theta = -1.5 K.     

Crystal structure of potassium tetramethylammonium hexacyanocobaltate(III) trihydrate: K3(Me4N)3[Co(CN)6]2·3H2O

The structure of K₃(Me₄N)₃[Co(CN)₆]₂·3H₂O has been determined from three-dimensional X-ray diffraction data. The unit cell is formed by parallel layers of cobalt octahedra [CoC₆] and potassium octahedra, [K(1)N₅O(1)], separated byc/2. In each layer both types of octahedra are located alternatively. The [MeN₄]⁺ tetrahedra are located in the cavities between the two layers of octahedra. The crystal structure of this compound is the first example of its type. TMC 2483     

Asymmetric total synthesis of rollicosin

[structure: see text] The first total synthesis of rollicosin, a member of a rare subgroup of Annonaceous acetogenins containing two terminal gamma-lactones, is reported. The approach features a highly regio- and stereoselective tandem ring-closing/cross-metathesis reaction for construction of the east-wing lactone and incorporation of the alkyl spacer. Establishment of the C4 stereocenter and addition of the west-wing lactone were achieved by Sharpless asymmetric dihydroxylation and enolate alkylation.     

Trehalose-based cyclodextrin analogs: cyclotrehalans (CTs)

A new concept for the de novo synthesis of artificial glyconanocavities is presented. The use of alternating α,α′-trehalose building blocks and (thio)urea segments allows the efficient synthesis of a new family of cyclooligosaccharides, namely cyclotrehalans (CTs), featuring a convex-shaped cavity with an apolar environment. CTs are designed to exhibit molecular inclusion abilities similar to that of cyclodextrins (CDs). Contrary to CDs, CTs expose the monosaccharide β-face to the inner cavity, while the (thio)urea tethers provides some conformational adaptability. High-yielding syntheses of a series of CTs and a preliminary evaluation of their inclusion properties are reported.     

Rapid determination of aliphatic amines in water samples by pressure-assisted monolithic octadecylsilica capillary electrochromatography-mass spectrometry

A pressure-assisted capillary chromatography-mass spectrometry method based on the use of a monolithic octadecylsilica (ODS) capillary is proposed for the determination of aliphatic amines. A 25 mM citric acid buffer containing 10% methanol is used as running electrolyte. Separation is achieved by simultaneously applying a capillary electrophoresis (CE) voltage of 13 kV and an overimposed pressure of 8 bar. The use of pressure is required to ensure stable electrospray conditions. Analysis times are reduced by using a capillary column consisting of a 30 cm long monolithic silica capillary column bound with ODS and a fused-silica capillary column also 30 cm long. The proposed method was successfully applied to the determination of low-molecular-weight aliphatic amines in tap and river water. The analysis of real samples requires cleanup and preconcentration, which can be performed automatically by inserting a minicolumn in the replenishment system of the commercial instrument.