A classical description of deep inelastic collisions with surface friction and deformation

The friction model for heavy ion induced fusion and deep inelastic nuclear reaction is extended to include deformation. Spheroidal deformation and relative motion of the mass centres of the two interacting nuclei are treated as dynamical variables. The radial frictional force has been assumed to be proportional to the rate of change of the separation between the two surfaces instead of the two centres of mass. The friction coefficients remain unaltered. The potential as a function of deformation and separation distance are generated by a single folding procedure. The model is applied to⁴⁰Ar+²³²Th at 379 MeV (Lab) and¹³⁶Xe+²⁰⁹Bi at 1,130 MeV (Lab). In case of the former, the energy loss, which has not been properly accounted for before, is now satisfactorily explained and in the case of the latter the model predicts the absence of fusion in agreement with experiment.     

Polymerization of methyl methacrylate initiated by Mn(III)–glycerol redox system

The kinetics of thermal polymerization of methyl methacrylate initiated by the redox system Mn(III)–glycerol was studied in aqueous sulfuric acid in the temperature range of 30–40°C, and the rates of polymerization, R_p, and Mn³⁺ disappearance, etc., were measured. The effect of certain water-miscible organic solvents and certain cationic and anionic surfactants on the rates of polymerization has been investigated. A mechanism involving the formation of a complex between Mn³⁺ and glycerol whose decomposition yields the initiating free radical with the polymerization being terminated by the metal ion has been suggested.     

Rapid spectrophotometric determination of phenothiazines with molybdophosphoric acid

A simple and rapid spectrophotometric method for the determination of six phenothiazines can be based on the formation of a coloured compound between molybdophosphoric acid and phenothiazines. The i.r. and e.s.r. spectra of the coloured compounds showed that molybdophosphoric acid oxidizes phenothiazines to a radical cation with which it then forms a coloured compound. The proposed method is employed for the determination of phenothiazines in pharmaceutical preparations. Calibration graphs are linear over ranges of about 100–2000 μg of the phenothiazine.     

A characterization based on the equidistribution of the first two spacings of record values

Summary For a sequence {X _n:n=0, 1, 2,...} of i.i.d. discrete random variables let X ₀ denote the zeroeth record value and X _L(1), the first record value. It is shown that X ₀ and X _L(1) –X ₀ are identically distributed if and only if X ₀ has the geometric distribution over the lattice k :k=1, 2,... for some >0.     

Aqueous polymerization of acrylonitrile initiated by the bromate–thiourea redox system

The aqueous polymerization of acrylonitrile initiated by an acidified bromate–thiourea redox system has been studied under nitrogen atmosphere. The rate of polymerization is independent of thiourea concentration over the range 2–9 × 10^?3M and reaches maximum at 9 × 10^?3M. The rate varies linearly with [monomer]. The initial rate of polymerization as well as the maximum conversion increases within the range of 4–22.5 × 10^?3M KBrO₃, but beyond 22.5 × 10^?3M the rate of polymerization decreases. The initial rate and the limiting conversion increases with increasing polymerization temperature in the range 30–45°C; and beyond 45°C they decrease. The effect of certain neutral salts, water-soluble solvents, and micelles of cationic, anionic, and nonionic surfactants on the rate of polymerization has been investigated.     

Synthesis and characterization of styrene grafted carbon nanotube and its polystyrene nanocomposite

Effective side wall functionalization of single-walled carbon nanotube (SWCNT) with 4-vinylaniline was carried out through solvent free functionalization. The functionalized SWCNT was characterized through FT-IR and NMR. Typical peaks to identify the functionalization were observed. Thermal analysis shows around 48% weight loss in functionalized SWCNT in comparison to the pure SWCNT. The ratio of disordered to order transition (I_D/I_G) in FT-Raman, indicated the generation of some surface defects due to functionalization. Near infrared spectrum of functionalized SWCNT also confirmed the functionalization of SWCNT. The polystyrene nanocomposite materials were prepared with functionalized SWCNT as fillers by solution casting from tetrahydrofuran. The functionalized SWCNT nanocomposite showed significant improvement in mechanical properties and electrical properties. The dispersibility of the carbon nanotube in the composite was investigated by using scanning electron microscopy.     

Investigation of nu(N-H) and nu(C-N) stretching modes of propylamine (C3H7NH2) in a binary system C3H7NH2 + CH3OH via concentration dependent Raman study and ab initio calculations

Raman spectra of propylamine (C3H7NH2) and its binary mixtures, C3H7NH2 + CH3OH with varying mole fractions of the reference system, C3H7NH2, C were recorded in two widely apart wavenumber regions, 3100-3600 cm(-1) and 1225-1325 cm(-1). In the former region, the two Raman bands at approximately 3305 and approximately 3326 cm(-1), obtained after the line shape analysis, which were assigned to symmetric nu(N-H) and anti-symmetric nu(N-H) stretching modes, respectively, show a downshift upon dilution. However, whereas the nu(N-H) anti-symmetric mode shows a shift of 18.6 cm(-1), the nu(N-H) symmetric mode shows a much smaller shift (5.7 cm(-1)) between neat liquid and high dilution, C = 0.1. This aspect has been explained using the optimized geometries calculated employing ab initio theory (MP2 level) for the neat C3H7NH2 and its different hydrogen-bonded complexes. The linewidth versus concentration plot for the nu(N-H) anti-symmetric stretching mode, however exhibits a distinct maxima at C = 0.4, which has been explained as a slight departure from the concentration fluctuation model. In the latter region, a symmetric peak is observed, which corresponds to nu(C-N) stretching mode, which shows an upshift upon dilution and an almost linear concentration dependence. This has also been explained in terms of the parameters obtained from the optimized geometries of the different hydrogen-bonded complexes.     

Synthesis of chiral α-amino acids

A novel method for the synthesis of chiral α-amino acids has been developed where the acid functionality was constructed by oxidizing a hydroxymethyl group introduced by Evans’ method in the α-position of an appropriate acid substrate and the amino part came from the amide of the original carboxyl group following a modified Hofmann rearrangement reaction.     

Energies of Charge Transfer for the Supramolecular Complexes of [60]- and [70]Fullerenes with a Series of meso-Tetraphenylporphyrins in the Solution State

Supramolecular complexes of [60]- and [70]fullerenes with various meso-tetraphenylporphyrins in toluene solutions have been studied by electronic absorption spectroscopy. Charge transfer (CT) absorption bands are observed in the visible region. Vertical ionization potentials (I _D ^V) of the meso-tetraphenylporphyrins are reported from a study of EDA interaction of these porphyrins with a number of electron acceptors like o-chloranil, p-chloranil, 2,3-dichloro-5,6-dicyanobenzoquinone (DDQ) and vitamin K. The dependence of the CT transition energy on the donor ionization potential has been utilized to estimate the vertical electron affinities (E _A ^V) of [60]- and [70]fullerenes in solution. The value of E _A ^V for [60]fullerene is found to be 0.10 eV lower in magnitude than that of [70]fullerene. We have extracted degrees of CT, and oscillator and transition dipole strengths of the fullerenes/meso-tetraphenylporphyrins complexes. The experimental results show that the CT complexes studied here have a neutral character in their ground states. Electronic coupling elements have been determined for fullerene/meso-tetraphenylporphyrin complexes. Values of the solvent reorganization energy indicate that the electron transfer process takes place at a faster rate in the case of [70]fullerene/meso-tetraphenylporphyrin complexes.