Polyanion-Polykation-Wech-selwirkung. 2. Mitt

Ohne Zusammenfassung     

The effect of N2O on the isotopic composition of air-CO2 samples

The ionisation efficiencies of N2O vs. CO2 as well as their ratios were measured in detail introducing clean N2O and CO2 into the electron impact ion source of an isotope ratio mass spectrometer. Changes in the ionisation efficiency ratio (IER) were found for different electron energy settings and compared with the ratios of literature ionisation cross-section values for pure N2O and CO2. To establish the influence of mixtures of N2O and CO2 in a mass spectrometer, artificial air mixtures were prepared by mixing different amounts of N2O and CO2 from well-calibrated spike cylinders with CO2-free air. The mixing ratios varied from 8-512 ppb for N2O and from 328-744 ppm for CO2. With these mixtures the effects of varying N2O concentrations on apparent CO2 isotope ratios in air samples were determined. After applying a mass balance correction the delta13C results were consistent within small error margins. The data seemed almost independent from a particular choice for the IER of N2O vs. CO2 in the correction algorithm. For delta18O a small effect of the ionisation efficiency ratio of N2O vs. CO2 was found. Several sets of calculations were made varying the IER between 0.88 and 0.62. The dependence of delta18O was the smallest with an adopted IER of 0.68-0.72 in the mass balance correction equation for isotopic analysis of CO2 in air. For high-precision measurements of the CO2 stable isotope ratios in air samples a careful assessment of the mass spectrometer performance is necessary. Different ion sources, even different ion source settings, alter the IER of N2O vs. CO2 which is used in the N2O correction algorithm. Preferably, the specific mass spectrometric behaviour should be established with clean N2O/CO2 mixtures or with air mixtures covering a larger range of N2O concentrations.     

Size-selective synthesis and stabilization of gold organosol in C(n)TAC: enhanced molecular fluorescence from gold-bound fluorophores

Gold nanoparticles of variable sizes have been synthesized in toluene employing two-phase (water-toluene) extraction of AuCl4- followed by its reduction with sodium borohydride in the presence of a series of cationic surfactants of a homologous series having the general formula C(n)TAC. The solubility features of the gold particles in the organic solvent have been accounted qualitatively by calculating the van der Waals interaction potential between the particles. The effect of thermal energy and medium dielectric constant on the stability of metal particles has been studied by measuring the surface plasmon resonance. The stabilization of surfactant-mediated gold particles as hydrosol or organosol has been elucidated by considering the double-layer interaction as a function of the dielectric constant of the solvent medium. The influence of the counterion of the phase transfer reagent and stabilizing ligand on the photochemical stability of the gold colloids has been investigated. The fluorescence probe 1-methylaminopyrene (MAP) was considered for the surface functionalization of the gold particles, and it has been found that there is an enhancement of molecular fluorescence from the gold-probe assembly.     

A mild conversion of phenylpropropnoid into rare phenylbutanoids: (E)-4-(2,4,5-trimethoxyphenyl)but-1,3-diene and (E)-4-(2,4,5-trimethozypheny)but-1-ene occuring in Zingiber cassumunar

(E)-4-(2',4',5'-trimethoxyphenyl)but-1,3-diene (4) and (E)-4-(2',4',5'-trimethoxyphenyl)but-1-ene (6), bioactive phenylbutanoids of Zingiber cassumunar, were synthesized exclusively with trans geometry. Treatment of methylmagnesium iodide with (E)-2',4',5'-trimethoxycinnamaldehyde (2), an oxidized product of abundantly available toxic (Z)-phenylpropanoid (1) of Acorus calamus, gave (E)-4-(2',4',5'-trimethoxyphenyl)but-3-en-2-ol (3) which upon dehydration with copper sulphate/silica gel under microwave irradiation for 3 min afforded 4 in 58% yield. Further, catalytic hydrogenation of 4 with 10% Pd/C afforded 4-(2',4',5'-trimethoxyphenyl)butane (5) which upon dehydrogenation with DDQ/SiO2 afforded hypolipidemic 6 in 54% yield.     

Effect of environmental factors and carbohydrate on gellan gum production

Submerged culture fermentation studies were carried out in batch mode for optimizing the environmental parameters and carbon source requirement by Pseudomonas elodea for the production of gellan gum. The maximum production of gellan gum was obtained with 16-h-old culture and 8% inoculum at 30°C and pH 7.0 after 52 h of incubation (6.0 g/L). Of the various carbon sources tested, 2% sucrose, glucose, and soluble starch yielded considerably high amounts of gellan. Studies on the concentration of various carbohydrates on gellan gum production indicated that the optimum concentration of glucose and starch was 3%, whereas for sucrose it was 4%. The addition of glucose in the medium above 3% had a detrimental effect on gellan yield. The investigation of intermediate two-step addition of glucose under identical conditions of fermentation showed an enhanced production of gellan (8.12 g/L) as compared with the control (6.0 g/L). To optimize the recovery of gellan from fermented broth, different solvents were tested for precipitation of gellan gum. Among the various solvents tested, tetrahydrofuran gave better recovery of gellan (82%) as compared with the conventional solvent isopropanol (49%).     

Isometric graphing and multidimensional scaling for reaction-diffusion modeling on regular and fractal surfaces with spatiotemporal pattern recognition

Heterogeneous surface reactions exhibiting complex spatiotemporal dynamics and patterns can be studied as processes involving reaction-diffusion mechanisms. In many realistic situations, the surface has fractal characteristics. This situation is studied by isometric graphing and multidimensional scaling (IGMDS) of fractal surfaces for extracting geodesic distances (i.e., shortest scaled distances that obtain edges of neighboring surface nodes and their interconnections) and the results obtained used to model effects of surface diffusion with nonlinear reactions. Further analysis of evolved spatiotemporal patterns may be carried out by IGMDS because high-dimensional snapshot data can be efficiently projected to a transformed subspace with reduced dimensions. Validation of the IGMDS methodology is carried out by comparing results with reduction capabilities of conventional principal component analysis for simple situations of reaction and diffusion on surfaces. The usefulness of the IGMDS methodology is shown for analysis of complex patterns formed on both regular and fractal surfaces, and using generic nonlinear reaction-diffusion systems following FitzHugh Nagumo and cubic reaction kinetics. The studies of these systems with nonlinear kinetics and noise show that effects of surface disorder due to fractality can become very relevant. The relevance is shown by studying properties of dynamical invariants in IGMDS component space, viz., the Lyapunov exponents and the KS entropy for interesting situations of spiral formation and turbulent patterns.     

A review on thiocyanate methods for the estimation of molybdenum by molecular absorption spectroscopy

A review is presented on thiocyanate methods for the estimation of molybdenum in a wide variety of samples. They include conventional thiocyanate methods in which molybdenum forms an orange red complex with the thiocyanate ions and improved thiocyanate methods where the sensitivity is increased through the formation of ternary ion association complex.     

Determination of enzyme kinetic parameters of cyclic CMP-specific phosphodiesterase by quantitative fast atom bombardment tandem mass spectrometry

The determination of cytidine 3′,5′-cyclic monophosphate-specific phosphodiesterase activity by means of fast-atom bombardment (FAB) mass Spectrometry with mass-analysed ion kinetic energy (MIKE) spectrum scanning is described. Initial efforts to determine the activity of the enzyme by this method were unsuccessful owing to the obfuscation of sample-related peaks by peaks emanating from the incubation buffer and cation adducts; dilution of buffer and a desalting procedure overcame these difficulties. In the resulting positive-ion FAB mass spectra, characteristic peaks of the enzyme substrate and product could be readily identified and the protonated molecular ions selected for MIKE scanning. By spiking enzyme incubates with known amounts of substrate and product, and measuring peak heights in the MIKE spectra of both spiked and unspiked samples, the substrate/product ratio at the end of a series of phosphodiesterase incubations was determined. From the data obtained, the K_m and V_max of the phosphodiesterase were calculated as 6.08 mM and 11 μmol min^?1 mg^?1, respectively, showing good agreement with the analogous values of 8.06 mM and 5.8 μmol^?1 min^?1 mg^?1 obtained by radioactive assay.     

Study of Densities, Viscosities and Ultrasonic Speeds of Binary Mixtures Containing 1,2-Dimethoxyethane and an Alkan-l-ol at 298.15 K

The viscosity deviation (Δη), the excess molar volume (V ^E) and the ultrasonic speed (u) have been investigated from viscosity (η) and density (ρ ) measurements of binary liquid mixtures of 1,2-dimethyoxyethane with methanol, ethanol, propan-1-ol, butan-1-ol, pentan-1-ol, hexan-1-ol or octan-1-ol over the entire range of composition at 298.15 K. The excess volumes are negative over the entire range of composition for all of the mixtures with the exception of hexan-1-ol and octan-1-ol. The excess isentropic compressibilities (K _S ^E) and viscosity deviations are negative for all of the mixtures. The magnitudes of the negative values of V ^E decrease with the number of carbon atoms of the alkan-1-ol. The trend of increasing K _S ^E values with the chain length of the alkanol is similar to that observed in the case of V ^E. Graphs of V ^E, Δ η, K _S ^E, Δ u, L _f ^E and Z ^E against composition are presented as a basis for a qualitative discussion of the results.