Intersite structural rearrangement of the blue copper site induced by substrate binding: spectroscopic studies of a copper-containing nitrite reductase from Alcaligenes xylosoxidans NCIMB 11015

A copper-containing nitrite reductase from Alcaligenes xylosoxidans NCIMB 11015 has its own unique blue or type 1 copper protein resonance Raman spectrum in the usual Cu-S(Cys) stretching region, nu(Cu-S(Cys)), with a pair of strong peaks at 412 and 420 cm(-1) and a weak peak at 364 cm(-1). The predominantly nu(Cu-S(Cys)) Raman bands at 412, 420, and 364 cm(-1) of the type 1 copper site all shifted to higher frequencies upon binding of nitrite to the type 2 copper site, and the resonance Raman difference spectra progressively intensified with the increments of nitrite ion concentration. Positive support for substrate binding to the type 2 copper is provided by the nu(Cu-S(Cys)) bands in the resonance Raman spectrum of a type 2 copper-depleted enzyme, which is insensitive to the presence of NO2-. The shift to higher frequency of the Raman bands of the type 1 copper center with the addition of nitrite ions suggests a stronger Cu-S(Cys) interaction in the substrate-bound A. xylosoxidans nitrite reductase.     

Reduction of thermal fluctuations in a cryogenic laser interferometric gravitational wave detector

The thermal fluctuation of mirror surfaces is the fundamental limitation for interferometric gravitational wave (GW) detectors. Here, we experimentally demonstrate for the first time a reduction in a mirror's thermal fluctuation in a GW detector with sapphire mirrors from the Cryogenic Laser Interferometer Observatory at 17 and 18 K. The detector sensitivity, which was limited by the mirror's thermal fluctuation at room temperature, was improved in the frequency range of 90 to 240 Hz by cooling the mirrors. The improved sensitivity reached a maximum of 2.2×10(-19) m/√Hz at 165 Hz.     

Preparation of Co–Al and Ni–Al layered double hydroxide thin films by a sol–gel process with hot water treatment

Using hot water treatment of sol–gel derived precursor gel films, Co–Al and Ni–Al layered double hydroxide (LDH) thin films were prepared. The precursor gel films of Al₂O₃–CoO or Al₂O₃–NiO were prepared from cobalt or nickel nitrates and aluminum tri-sec-butoxide using the sol–gel method. Then, the precursor gel films were immersed in a NaOH aqueous solution of 100 °C. Nanocrystallites of Co–Al and Ni–Al LDH were precipitated with the hot water treatment with NaOH solution. The largest amounts of nanocrystals were obtained with a solution of pH = 10 for Co–Al LDH, and with that of pH = 9 for Ni–Al LDH. X-ray diffraction measurements confirmed that this process formed CO₃ ²⁻ intercalated LDHs. Both Co–Al and Ni–Al LDH thin films were confirmed to work as electrodes for electrochemical devices by cyclic voltammogram measurements.     

Formulation study on retinoic acid gel composed of iota-carrageenan, polyethylene oxide and Emulgen® 408

In the present study, all-trans retinoic acid (RA) gels formulated with various compositions of polyethylene oxide (Emulgen?) and iota-carrageenan (ι-CG) were prepared and their physicochemical properties were evaluated. The compression energy, which is the work required to compress the product through a fixed distance, increased with increasing amount of ι-CG or Emulgen?. The adhesion energy and displacement decreased with increasing amount of ι-CG or Emulgen? due to the progression of gel formation. From the results of the sensory tests, the properties of RA gels such as adhesiveness, gel strength and spreadability seemed to be adjustable depending on the condition of skin by varying the components of RA gels. Through photostability study, the expiration date and storage conditions of RA gels were determined as "4°C for 28?d with no exposure to light."     

Mineral composition of frozen taro for determination of geographic origin

The mineral composition of frozen food of taro [Colocasia esculenta (L.) Schott] was analyzed to categorize the geographical production place of taro. The concentrations of Co and H₂PO₄ ⁻ were found to be useful to separate the producing place between Japan and China. The analysis was performed by instrumental neutron activation analysis (INAA) and ion chromatography (IC). In the case of INAA, the samples were dried and sealed in a vinyl bag and irradiated with thermal neutrons from JRR3M, installed at Japan Atomic Energy Agency (JAEA). The activated samples were cooled down for a few weeks and the elements (Co, Cr, Fe, Rb, Zn) were determined. Cobalt concentration of frozen taro from China was higher than that from Japan. The tendency was the same in the fresh sample of taro. When concentration of H₂PO₄ ⁻ of frozen sample was measured, taro from Japanese product was higher than that of Chinese one, contrary to fresh sample. This result might be caused by the leakage of H₂PO₄ ⁻ during freezing process, indicating that we should be careful to apply the discrimination indicators. In addition to Co, there was a significant difference of Rb and Fe concentrations between frozen taro from Japan and China.     

Ultraviolet-Laser-Induced Crystallization of Sol-Gel Derived Inorganic Oxide Films

Structural changes stimulated by ultraviolet (UV) laser irradiations of sol-gel derived inorganic oxide films were investigated. Dried gel films of TiO₂, Nb₂O₅, Ta₂O₅, SrTiO₃ and Pb(Zr _x Ti_1–x )O₃ (PZT) were found to be crystallized by the laser irradiation. On the other hand, the photo-induced change in gel films of BaTiO₃, LiNbO₃ and LiTaO₃ was not observed although the laser beams were absorbed in the films. These sol-gel films were thermally crystallized at almost the same temperature around 600–700°C except TiO₂. Thus, the UV-laser-induced crystallization is not directly ascribed to a simple thermal effect with the irradiation. Photochemical properties of the cations are assumed to be important for the change in sol-gel films.     

Crystallization and Reduction of Sol-Gel-Derived Zinc Oxide Films by Irradiation with Ultraviolet Lamp

Structural changes in sol-gel films with photo-irradiation were investigated using zinc oxide (ZnO) derived from zinc acetate. The exposure of the films to an ultraviolet lamp induced hexagonal ZnO crystals in a relatively dense amorphous structure. On the other hand, the formation of zinc metal was found in a porous gel film. The photo-induced crystallization and reduction are ascribed to the electronic excitation in the metastable non-crystalline states.     

Synthesis of diversely functionalized hexahydropyrrolo[2,3-b]indoles using domino reactions, olefination, isomerization and Claisen rearrangement followed by reductive cyclization

Hexahydropyrrolo[2,3-b]indoles 6 were synthesized in five steps from indolin-3-one 8 by a general and efficient method, in which elements of molecular diversity were readily added onto the 3a-position of the pyrrolo[2,3-b]indole ring system. Horner-Wadsworth-Emmons reaction of 2-allyloxyindolin-3-ones 7, derived from indolin-3-one 8 and a variety of allylic alcohols, smoothly proceeded with successive Claisen rearrangement to give the corresponding 3-allyl-3-cyanomethylindolin-2-ones 15. Indolin-2-ones 15 were converted into pyrrolo[2,3-b]indoles 6 using partial hydrolysis followed by reductive cyclization with LiAlH(4). Synthesis of N-methylated pyrrolo[2,3-b]indole derivatives 23 and 26 is also described.     

Influence of SO2 on the durability of Ag/Al2O3 catalyst in lean NOx reduction by ethyl alcohol

The influence of SO₂ (200 ppm) on the durability of a Ag/Al₂O₃ catalyst for the reduction of NOx with ethyl alcohol was examined. The results strongly suggest that H₂O in diesel engine exhaust is essential for the high durability of Ag/Al₂O₃ catalyst in the presence of SO₂.     

Preparation and reactions of 1,1,4,4-tetrakis(trimethylsilyl)butane-1,4-diyl dianion

Reduction of 1,1-bis(trimethylsilyl)ethylene by alkali metal led to the facile dimerization to the 1,1,4,4-tetrakis(trimethylsilyl)butane-1,4-diyl dianion which has been found to be utilized as a reagent for the Peterson reaction.