Ruthenium-catalyzed propargylic substitution reactions of propargylic alcohols with oxygen-, nitrogen-, and phosphorus-centered nucleophiles

The scope and limitations of the ruthenium-catalyzed propargylic substitution reaction of propargylic alcohols with heteroatom-centered nucleophiles are presented. Oxygen-, nitrogen-, and phosphorus-centered nucleophiles such as alcohols, amines, amides, and phosphine oxide are available for this catalytic reaction. Only the thiolate-bridged diruthenium complexes can work as catalysts for this reaction. Results of some stoichiometric and catalytic reactions indicate that the catalytic propargylic substitution reaction proceeds via an allenylidene complex formed in situ, whereby the attack of nucleophiles to the allenylidene C(gamma) atom is a key step. Investigation of the relative rate constants for the reaction of propargylic alcohols with several para-substituted anilines reveals that the attack of anilines on the allenylidene C(gamma) atom is not involved in the rate-determining step and rather the acidity of conjugated anilines of an alkynyl complex, which is formed after the attack of aniline on the C(gamma) atom, is considered to be the most important factor to determine the rate of this catalytic reaction. The key point to promote this catalytic reaction by using the thiolate-bridged diruthenium complexes is considered to be the ease of the ligand exchange step between a vinylidene ligand on the diruthenium complexes and another propargylic alcohol in the catalytic cycle. The reason why only the thiolate-bridged diruthenium complexes promote the ligand exchange step more easily with respect to other monoruthenium complexes in this catalytic reaction should be that one Ru moiety, which is not involved in the allenylidene formation, works as an electron pool or a mobile ligand to another Ru site. The catalytic procedure presented here provides a versatile, direct, and one-step method for propargylic substitution of propargylic alcohols in contrast to the so far well-known stoichiometric and stepwise Nicholas reaction.     

Polyoxymethylene prepared by γ-ray-induced polymerization of tetraoxymethylene single crystal

Summary In order to prepare a large single crystal, tetraoxymethylene recrystallized by distilled water adjusted to pH 8 was sealed in an ampoule at a reduced pressure of 1 mm Hg and was crystallized in a furnace with the temperature gradient of 6 °C/cm. The lowering rate of the ampoule was required to be 6 cm/day for preparing the single crystal with 1 cm diameter and to be 3 cm/day for one with 2 cm diameter. The optimum angle at the pointing end of the ampoule, where a seed crystal is formed, was about 40°. The b-axis of the obtained single crystal was parallel to the direction of the crystal growth i. e. the wall of the ampoule. It was polymerized byγ-ray under conditions which prevent the growth of the twin crystal. The obtained polyoxymethylene was porous, because the polymerization yield of 100% could not be attained. However, it was so tough that a specimen for measurements could be cut down by a diamond cutter. Its fiber axis was parallel to the direction of the wall of the ampoule. It did not contain the so-called amorphous regions, although it did contain defects. It was characterized with the extremely high orientation of the polymer chains.

---

Zusammenfassung Zur Pr?parierung gro?er Einkristalle wurde rekristallisiertes Tetraoxymethylen in destilliertem Wasser von p_H 8 in eine Ampulle bei einem reduzierten Quecksilberdruck von 1 mm eingefüllt und in einem Ofen mit einem Temperaturgradienten von 6 °C/cm kristallisiert. Die Abkühlgeschwindigkeit der Ampulle betrug etwa 6 cm/Tag für die Pr?paration eines Einkristalls mit 1 cm ? und 3 cm/Tag für einen solchen mit 2 cm ?. Der optimale Winkel am spitzen Ende der Ampulle, wo der Keimkristall gebildet wird, betrug etwa 40°. Dieb-Achse des Einkristalls war parallel zur Wachstumsrichtung, d. h. zur Wand der Ampulle. Der Kristall wurde durch R?ntgenstrahlen polymerisiert unter Bedingungen, die das Wachsen eines Zwillingskristalls vermeiden. Das erhaltene Polyoxymethylen war por?s, doch konnte eine Polymerisationsausbeute von 100% nicht erhalten werden. Doch war der Einkristall so z?h, da? für Messungen eine Probe mit dem Diamantschneider abgeschnitten werden konnte. Die Faserachse war parallel zur Wandrichtung der Ampulle. Das kristalline Material enthielt keine sogenannten amorphen Bereiche, allerdings Defekte. Es war durch extrem hohe Orientierungen der Polymerketten charakterisiert.

---

---

We are greatly indebted to Dr.Y. Miyake of Mitsui Toatsu Co., Ltd. for providing the tetraoxymethylene. Thanks are to due Dr.M. Nishii of Osaka Laboratories, Japan Association for Radiation Research on Polymer for the radiation polymerization, to Mr.T. Tsukihara for the X-ray measurement, and to Mrs.H. Tanaka for the help with the electron microscopy. We are also grateful to Prof.S. Seki for offering the use of differential scanning calorimeter.     

Ruthenium-catalyzed propargylic substitution reaction of propargylic alcohols with thiols: a general synthetic route to propargylic sulfides

A novel cationic methanethiolate-bridged diruthenium complex [Cp*RuCl(mu2-SMe)2RuCp*(OH2)]OTf (1e) has been disclosed to promote the catalytic propargylic substitution reaction of propargylic alcohols bearing not only terminal alkyne group but also internal alkyne group with thiols. It is noteworthy that neutral thiolate-bridged diruthenium complexes (1a-1c), which were known to promote the propargylic substitution reactions of propargylic alcohols bearing a terminal alkyne group with various heteroatom- and carbon-centered nucleophiles, did not work at all. The catalytic reaction described here provides a general and environmentally friendly preparative method for propargylic sulfides, which are quite useful intermediates in organic synthesis, directly from the corresponding propargylic alcohols and thiols.     

New cyclic tellurides. Synthesis, reaction and ligand properties of 2,2,6,6-tetramethyl-1-oxa-4-tellura-2,6-disilacyclohexane (C6H16OSi2Te). X-Ray structure determination of C6H16OSi2TeI2

A new tellurium-containing heterocyclic compound, 2,2,6,6-tetramethyl-1-oxa-4-tellura-2,6-disilacyclohexane (C₆H₁₆OSi₂Te) (1), has been prepared by treatment of 1,3-bis(chloromethyl)-1,1,3,3-tetramethyldisiloxane with sodium telluride. Mononuclear and dinuclear palladium complexes of this telluride have been prepared by the reaction of 1 with PdCl₂(PhCN)₂ and Na₂PdCl₄, respectively. The following new derivatives of 1 have also been produced: C₆H₁₆OSi₂TeI₂ (2), C₆H₁₆OSi₂TeBr₂, C₆H₁₆OSi₂TeCl₂, C₆H₁₆OSi₂Te(CH₃)I, and C₆H₁₆OSi₂Te(CH₂Ph)Br. IR, ¹H and ¹³C NMR and mass spectral data of these new compounds are reported and discussed. ¹H NMR studies revealed that in CDCl₃ solution both telluronium salts reductively eliminate alkyl halide. The crystal structure of compound 2 has been determined by X-ray diffraction. The compound crystallizes in the monoclinic space group, P2₁/c, with four molecules in a unit cell of dimension a 12.960(3), b 8.846(2), c 13.754(4) Å, β 92.44(2)°, R = 0.049, and R_w = 0.067 for 3599 unique reflections with |F₀| > 3σ(F₀). The compound forms a six-membered ring of a slightly displaced boat type. The geometry about the Te atom is pseudo-octahedral, with two carbon atoms (Te-C = 2.156(7) and 2.137(6) Å) and two iodine atoms of the neighbouring molecules (weak intermolecular bonds, Te · I = 3.769 and 3.806 Å) in the equatorial positions and two iodine atoms (Te-I = 2.909(1) and 2.913(1) Å) in the axial positions.     

Synthesis of Indoles from N-Substituted Anilines and Triethanolamine by a Homogeneous Ruthenium Catalyst

N-substituted anilines react with triethanolamine in the presence of a catalytic amount of a homogeneous ruthenium catalyst to give the corresponding 1-substituted indoles in good yields.     

Alkane Shape- and Size-Recognized Selective Vapor Sorption in “Channel-Like” Crystals Based on Thiacalixarene Assemblies

Alkanes composed of C−C and C−H show a low electric polarization, and therefore, there is only very weak interaction between alkanes and adsorbents. Thus, it is difficult to separate a specific alkane from a mixture of alkanes by adsorption. Here, two activated “channel-like” crystals generated from brominated thiacalix[4]arene propyl ethers, which adopt 1,3-alternate and partial cone conformations, recognize specific alkane vapors depending on alkane-shape and -size, sorting in three-type alkane guests such as linear, branched, and cyclic alkanes. Two activated crystals, which are prepared by removal of solvent upon heating under reduced pressure, incorporate branched and/or cyclic alkane vapors by a unique “gate-opening” mechanism via a crystal transformation in the process. Linear alkane vapors do not trigger gate opening and are not taken up by the activated crystals. The shape and size molecular-recognition properties of the activated crystals promises considerable usefulness for the separation of linear, branched, and cyclic alkanes.     

Highly Selective Asymmetric Intramolecular Selenocyclisation

Asymmetric intramolecular selenocyclisation of alkenoic acids, alkenols and alkenyl urethanes using chiral ferrocenylselenenyl cations proceeds smoothly to give the corresponding lactones, cyclic ethers and N-heterocyclic compounds, respectively, in moderate yields with very high diastereoselectivities.     

Chiral Bis(oxazoline)-copper Catalyzed Enantioselective Imidation of Sulfides

Prochiral sulfides reacted with Phl=NTs in the presence of a catalytic amount of Cu(I) salt together with a chiral 4,4′-disubstituted bis(oxazoline) ligand to afford the corresponding chiral sulfimides.     

Stereodivergent Synthesis and Stereochemical Reassignment of the C79–C104 Fragment of Symbiodinolide

We have synthesized eight possible diastereoisomers 3 a – h of the C79–C97 fragment of symbiodinolide ( 1 ) in a stereodivergent manner by utilizing a dithiane addition to the aldehyde as a key step. Comparison of the ¹³C NMR chemical shifts of the natural product 1 and the synthetic products 3 a – h indicated that the relative stereostructure of this fragment in symbiodinolide ( 1 ) is that represented in 3 a or f . We have stereodivergently synthesized eight possible diastereoisomers of the C94–C104 fragment 4 a – h , and we have compared their ¹³C NMR chemical shifts with those of the natural product, which established the relative stereochemistry of this fragment to be that described in diastereoisomers 4 a or e . By combining the stereostructural outcomes of the C79–C97 and C94–C104 fragments, we have proposed four candidate compounds of the C79–C104 fragment 2 a – d . We also synthesized diastereoisomers 2 a and b ( 2 a in the preceding article; Chem. Eur. J. 2015 , DOI: 10.1002/chem.201503880) by a Julia–Kocienski olefination and diastereoisomers 2 c and d by a Wittig reaction. By comparing the ¹³C NMR chemical shifts of natural symbiodinolide ( 1 ) with those of the synthetic products 2 a – d , we have reassigned the stereostructure of the C79–C104 fragment of natural product 1 to be that depicted in diastereoisomer 2 b .