Cold column trapping-cloud point extraction coupled to high performance liquid chromatography for preconcentration and determination of curcumin in human urine

A cold column trapping-cloud point extraction (CCT-CPE) method coupled to high performance liquid chromatography (HPLC) was developed for preconcentration and determination of curcumin in human urine. A nonionic surfactant, Triton X-100, was used as the extraction medium. In the proposed method, a low surfactant concentration of 0.4% v/v and a short heating time of only 2 min at 70 °C were sufficient for quantitative extraction of the analyte. For the separation of the extraction phase, the resulted cloudy solution was passed through a packed trapping column that was cooled to 0 °C. The temperature of the CCT column was then increased to 25 °C and the surfactant rich phase was desorbed with 400 μL ethanol to be directly injected into HPLC for the analysis. The effects of different variables such as pH, surfactant concentration, cloud point temperature and time were investigated and optimum conditions were established by a central composite design (response surface) method. A limit of detection of 0.066 mg L⁻¹ curcumin and a linear range of 0.22–100 mg L⁻¹ with a determination coefficient of 0.9998 were obtained for the method. The average recovery and relative standard deviation for six replicated analysis were 101.0% and 2.77%, respectively. The CCT-CPE technique was faster than a conventional CPE method requiring a lower concentration of the surfactant and lower temperatures with no need for the centrifugation. The proposed method was successfully applied to the analysis of curcumin in human urine samples.     

Presentation of a new index for estimation of aromaticity in halo‐ and cyanobenzenes: The role of potential energy in aromaticity

A linear correlation has been obtained between average values of Hamiltonian kinetic energy ( ) and potential energy ( ) calculated at the bond critical points using atoms in molecules method. This relation was used to introduce a new index ( ) for estimation of aromaticity in halo‐ and cyanobenzenes. Potential energy has different terms such as attraction between nuclei and electrons, also repulsion of electrons which affect the inertia and mobility of electrons, respectively. Therefore, contribution of potential energy in this relation must be controlled. Contribution of potential energy in aromaticity has been managed using a fitting parameter. This parameter was obtained by fitting the aromaticity stabilization energy data with values of aromaticity calculated by index for halo‐ and cyanobenzenes. The contribution of potential energy in index is complete when molecule is nonaromatic and is negligible when molecule is antiaromatic. Indeed, molecule is aromatic when contribution of potential energy in index lies between above limits. © 2013 Wiley Periodicals, Inc.     

Effect of engineered PLGA‐gelatin‐chitosan/PLGA‐gelatin/PLGA‐gelatin‐graphene three‐layer scaffold on adhesion/proliferation of HUVECs

A three‐layered fibrous scaffold composed of fibers of different diameters in each layer was fabricated in correspondence with the structure of the blood vessels. Effect of solution and electrospinning parameters on morphology and diameters of the fibers were investigated by scanning electron microscopy (SEM), for each layer. The SEM images showed that 18% poly (lactic‐co‐glycolic acid) (PLGA)‐gelatin‐chitosan in 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP)/acid acetic solution resulted in bead‐free fibers for the outer layer. For the middle layer, 18% PLGA‐gelatin in HFIP at 13 kV with 13 cm needle to collector distance was chosen as the optimum condition. SEM imaging demonstrated that by increasing graphene content from 0.5 to 2 wt% in the inner layer (as an electrically conductive/platelet anti‐adhesion material), the fiber diameter decreased from 324.01 ± 58.90 to 288.59 ± 70.77 nm. The effect of gelatin crosslinking on the microstructure of the fibers was also examined. Shrinkage ratio decreased from 57 to below 21% upon crosslinking of the three‐layered scaffold in exposure to vapor of 50% glutaraldehyde solution for 2 hours. Mechanical test showed that tensile strength of the crosslinked three‐layer scaffold in the longitudinal direction was 2.90 MPa which is comparable to that of the vein and artery. The MTT [3‐(4,5‐Dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide] assay displayed cell viability of above 96% for the PLGA‐gelatin containing 2 wt% graphene. SEM analysis revealed that the addition of graphene to PLGA‐gelatin (up to 2%) causes a remarkable improvement in cell adhesion.     

Curcumin loaded PEG400‐OA nanoparticles: A suitable system to increase apoptosis,decrease migration,and deregulate miR‐125b/miR182 in MDA‐MB‐231 human breast cancer cells

Curcumin is an anti‐cancerous agent, but its low‐solubility limits its clinical use. The relationship between deregulation of miRNAs and their targets suggested that miRNAs can be interest targets of curcumin in treatment of different cancers. In this study, to overcome essential defects of the clinical usage of this golden drug, curcumin‐encapsulated polymersome nanoparticles (CPNs) have been developed, and the cytotoxicity effects were studied on MDA‐MB‐231 breast cancer cells. The expression level of miR‐182/125b and the expression pattern of some potential targets in apoptotic pathway, predicted by in silico approaches, were analyzed by RT‐qPCR in CPNs‐treated and untreated cells. Moreover, the amount of CASP9 and CASP8 proteins were determined by Western blotting. The effect of CPNs on cell migration were studied by scratch test and the level of EGFR, E‐cadherin, and beta‐catenin proteins were monitored in CPNs‐treated and untreated cells by western blotting. RT‐qPCR analysis identified the downregulation of miR‐125b and miR‐182 in CPNs‐treated cells and the upregulation of some predicted apoptotic target genes such as P53, CASP9 and BAX after 24 hours. Western blotting confirmed the effects of curcumin on the increase of cleaved CASP9 protein. Based on data from the current experiment, the migration of MDA‐MB‐231 cells was decreased after CPNs treatment. According to the results, CPNs, as suitable and compatible nanocarriers, can deliver curcumin into cancerous cells more effectively and can increase the therapeutic effects of curcumin on MDA‐MB‐231 cells partly by suppression of miR‐125b and miR‐182 as well as induction of apoptosis and inhibition of metastatic progression.     

Imidazol-1-yl-acetic acid as a novel green bifunctional organocatalyst for the synthesis of 1, 8-dioxooctahydroxanthenes under solvent-free conditions

Imidazol-1-yl-acetic acid is introduced as a new, efficient and recyclable green bifunctional organocatalyst for the synthesis of 1,8-dioxooctahydroxanthenes under solvent-free conditions. This catalyst is water soluble and can be separated from the products by simple filtration. The filtrate can be evaporated to dryness and recrystallized from cool methanol to give the recovered catalyst. This organocatalyst was used for the synthesis of 1,8-dioxooctahydroxanthenes under solvent-flee conditions and recycled up to 8 consecutive runs without any losing of its efficiency.     

Semi-automated cloud point extraction with cold column trapping of surfactant-rich phase for phenazopyridine determination in human serum

A semi-automated cold column trapping-cloud point extraction (CCT-CPE) method was developed and applied to the determination of phenazopyridine in human serum. In the proposed technique, a mixture of sample (pH 8) and Triton X-100 (0.4 % v/v) was incubated at 90 °C for 5 min in a heating sample cell. The developed turbid solution was then flowed through a CCT preconcentration column packed with C18 sorbent using a peristaltic pump. A pair of thermal electric cooler (TEC) plates was used for cooling the column. The surfactant-rich phase was retained on the CCT at 0 °C and desorbed, subsequently, in an elevated temperature by ethanol. The analytical parameters such as pH, surfactant concentration, temperature and incubation time were optimized by a central composite design (response surface) method. Six replicated analyses at the optimized conditions resulted in a recovery of 99.7 % and a relative standard deviation of 2.45 for phenazopyridine. The detection limit of the method (3σ) was 0.50 mg L^?1 for the analyte. Compared to conventional CPE, the proposed CCT-CPE method required less sample handling, eliminated the centrifugation step and was substantially faster. The method was successfully applied to the determination of phenazopyridine in some human serum and tablet samples.     

Chromatographic Behavior of Aromatic Diamines in Hydro-Organic, Micellar and Submicellar Reversed Phase Liquid Chromatographic Modes

The chromatographic behavior (retention, elution strength, efficiency, peak asymmetry and selectivity) of some aromatic diamines in the presence of methanol with or without anionic surfactant SDS in the four different reversed phased liquid chromatographic (RPLC) modes, i.e., hydro-organic, micellar (MLC), low submicellar (LSC) and high submicellar (HSC), was investigated. In the three surfactant-mediated modes, the surfactant monomers coat the stationary phase even up to 70 % methanol; this results in the suppression of peak tailing (by masking the silanol groups on the stationary phase). In MLC and HSC, the solute retention decreases by increasing the surfactant concentration, while this situation was reversed in LSC. In the region between MLC and HSC modes (25–50 % methanol), retention of late eluting solutes was increased by increasing methanol content which is seemingly due to disaggregation of SDS micelles. Changes in selectivity were observed after changing the concentrations of SDS and methanol, in a greater extent when concentration of SDS was changed. Among the four studied RPLC modes, HSC showed the best efficiency with nearly symmetrical peaks. Prediction of retention of solutes in HSC based on a mechanistic retention model combined with Pareto-optimality method allowed the full resolution of target diamines in practical analysis times.     

Reward maximization in general dynamic matching systems

Queueing Systems - We consider a matching system with random arrivals of items of different types. The items wait in queues—one per item type—until they are “matched.” Each...     

Micellar histidinate hematin complex as an artificial peroxidase enzyme model: Voltammetric and spectroscopic investigations

The UV–vis spectrophotometry and cyclic voltammetry were employed to investigate the incorporation of hematin into histidine (His) in a micellar environment of sodium dodecyl sulfate (SDS). Histidine undergoes a reduction process on silver electrode, while, hematin and sodium dodecyl sulfate are not electroreactive species on this electrode. Electrochemistry of twine-by-twine mixture of His, hematin and SDS on silver electrode shows that the peak potential of His in the presence of SDS or hematin shifts negatively which indicates the interaction of SDS and hematin with His. The interaction of SDS and hematin with His was also confirmed using spectrophotometric measurements. However, the peak potential of His on silver electrode shifts positively in the presence of both SDS and hematin which indicates that in a triple-component solution of His–hematin–SDS a unique species is formed and is electroreactive on silver electrode. In this context, this triple-component solution represents unique absorption band in UV–vis spectra, which is related to the formation of a unique structure of a hemoprotein-like biomimetic catalyst. The catalytic activity of this artificial enzyme formed in triple-component solution was examined with respect to hydrogen peroxide and the apparent Michaelis–Menten (K_m) and catalytic rate (k_cat) constants were evaluated to be 3.31 μM and 0.043 s⁻¹, respectively.     

Oxygen permeation and oxidative coupling of methane in membrane reactor: A new facile synthesis method for selective perovskite catalyst

A dense membrane of La_0.6Sr_0.4Co_0.8Fe_0.2O_3−δ (LSCF) perovskite was prepared by a new chelating agent, ethylene diamine N,N,N′,N′-tetra N-acetyl diamine (EDTNAD). As a potent ligand, EDTNAD provided a facile one-step method to form complexes of the four metal ions, simultaneously. The oxygen permeation flux through the pure perovskite LSCF dense membrane was measured over temperature range of 1073–1223 K, thickness of 0.7–1.0 mm and oxygen partial pressure of 0.1–1.0 bar. Oxidative coupling of methane (OCM) reaction using LSCF disk in the atmospheric membrane reactor and over the temperature range of 1073–1173 K showed a C₂ selectivity of 100% and C₂ yield of 5.01% at 1153 K. Furthermore, OCM reaction data of the membrane reactor were discussed and compared with those of the fixed bed using the same perovskite powder as the catalyst.