Simple and robust near-infrared spectroscopic monitoring of indium-tin-oxide (ITO) etching solution using Teflon tubing

The ability to monitor etching solutions using a spectroscopy directly through existing Teflon lines in electronic industries is highly beneficial and offers many advantages. A monitoring method was developed using near-infrared (NIR) measurements with Teflon tubing as a sample container for the quantification of components in the indium-tin-oxide (ITO) etching solution composed of hydrochloric acid (HCl), acetic acid (CH₃COOH) and water. Measurements were reproducible and it was possible to use the same calibration model for different Teflon tubings. Even though partial least squares (PLS) calibration performance was slightly degraded for Teflon cells when compared to quartz cells of the similar pathlength, the calibration data correlated well with reference data. The robustness of Teflon-based NIR measurement was evaluated by predicting the spectra of 10 independent samples that were collected using five different Teflon tubes. Although, two Teflon tubes were visually less transparent than the other three, there was no significant variation in the standard error of predictions (SEPs) among the five Teflon tubes. Calibration accuracy was successfully maintained and highly repeatable prediction results were achieved. This study verifies that a Teflon-based NIR measurement is reliable for the monitoring of etching solutions and it can be successfully integrated into on-line process monitoring.     

Use of peptide for selective and sensitive detection of an Anthrax biomarker via peptide recognition and surface‐enhanced Raman scattering

A short 16‐amino acid peptide has been used in place of an antibody to selectively detect the specific Anthrax biomarker, protective antigen (PA), using surface‐enhanced Raman scattering (SERS). Peptides are more stable than antibodies under various biological conditions and are easily synthesized for a specific target. A peptide that has high affinity to PA was conjugated onto gold nanoparticles along with a Raman reporter and then incubated in various concentrations of PA. Parallel studies in which the peptide sequence was replaced with an antibody were performed to compare the performance of the two methodologies. Both the peptide and antibody functionalized nanoparticles were able to specifically detect PA concentrations down to 6.1 fM . These results demonstrate that these short, robust peptides can be used in the place of traditional antibodies to specifically recognize target biomarkers in the field for the potential diagnosis of disease. Copyright © 2010 John Wiley & Sons, Ltd.     

Effects of lipopolysaccharide-induced inflammation on expression of growth-associated genes by corticospinal neurons

Background  

Inflammation around cell bodies of primary sensory neurons and retinal ganglion cells enhances expression of neuronal growth-associated genes and stimulates axonal regeneration. We have asked if inflammation would have similar effects on corticospinal neurons, which normally show little response to spinal cord injury. Lipopolysaccharide (LPS) was applied onto the pial surface of the motor cortex of adult rats with or without concomitant injury of the corticospinal tract at C4. Inflammation around corticospinal tract cell bodies in the motor cortex was assessed by immunohistochemistry for OX42 (a microglia and macrophage marker). Expression of growth-associated genes c-jun, ATF3, SCG10 and GAP-43 was investigated by immunohistochemistry or in situ hybridisation.     

Physicochemical characterization of α‐chitin, β‐chitin,and γ‐chitin separated from natural resources

We isolated α‐chitin, β‐chitin, and γ‐chitin from natural resources by a chemical method to investigate the crystalline structure of chitin. Its characteristics were identified with Fourier transform infrared (FTIR) and solid‐state cross‐polarization/magic‐angle‐spinning (CP–MAS) ¹³C NMR spectrophotometers. The average molecular weights of α‐chitin, β‐chitin, and γ‐chitin, calculated with the relative viscosity, were about 701, 612, and 524 kDa, respectively. In the FTIR spectra, α‐chitin, β‐chitin, and γ‐chitin showed a doublet, a singlet, and a semidoublet at the amide I band, respectively. The solid‐state CP–MAS ¹³C NMR spectra revealed that α‐chitin was sharply resolved around 73 and 75 ppm and that β‐chitin had a singlet around 74 ppm. For γ‐chitin, two signals appeared around 73 and 75 ppm. From the X‐ray diffraction results, α‐chitin was observed to have four crystalline reflections at 9.6, 19.6, 21.1, and 23.7 by the crystalline structure. Also, β‐chitin was observed to have two crystalline reflections at 9.1 and 20.3 by the crystalline structure. γ‐Chitin, having an antiparallel and parallel structure, was similar in its X‐ray diffraction patterns to α‐chitin. The exothermic peaks of α‐chitin, β‐chitin, and γ‐chitin appeared at 330, 230, and 310, respectively. The thermal decomposition activation energies of α‐chitin, β‐chitin, and γ‐chitin, calculated by thermogravimetric analysis, were 60.56, 58.16, and 59.26 kJ mol^?1, respectively. With the Arrhenius law, ln β was plotted against the reciprocal of the maximum decomposition temperature as a straight line; there was a large slope for large activation energies and a small slope for small activation energies. α‐Chitin with high activation energies was very temperature‐sensitive; β‐Chitin with low activation energies was relatively temperature‐insensitive. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3423–3432, 2004     

Thermal‐ and Photo‐Induced Phase‐Transition Behaviors of a Tapered Dendritic Liquid Crystal with Photochromic Azobenzene Mesogens and a Bicyclic Chiral Center

A ribbon‐shaped chiral liquid crystalline (LC) dendrimer with photochromic azobenzene mesogens and an isosorbide chiral center (abbreviated as AZ₃DLC) was successfully synthesized and its major phase transitions were studied by using differential scanning calorimetry (DSC) and linear polarized optical microscopy (POM). Its ordered structures at different temperatures were further identified through structure‐sensitive diffraction techniques. Based on the experimental results, it was found that the AZ₃DLC molecule exhibited the low‐ordered chiral smectic (Sm*) LC phase with 6.31 nm periodicity at a high‐temperature phase region. AZ₃DLC showed the reversible photoisomerization in both organic solvents and nematic (N) LC media. As a chiral‐inducing agent, it exhibited a good solubility, a high helical‐twisting power, and a large change in the helical‐twisting power due to its photochemical isomerization in the commercially available N LC hosts. Therefore, we were able to reversibly “remote‐control” the colors in the whole visible region by finely tuning the helical pitch of the spontaneously formed helical superstructures.     

Protective Effects of Gintonin on Reactive Oxygen Species-Induced HT22 Cell Damages: Involvement of LPA1 Receptor-BDNF-AKT Signaling Pathway

Gintonin is a kind of ginseng-derived glycolipoprotein that acts as an exogenous LPA receptor ligand. Gintonin has in vitro and in vivo neuroprotective effects; however, little is known about the cellular mechanisms underlying the neuroprotection. In the present study, we aimed to clarify how gintonin attenuates iodoacetic acid (IAA)-induced oxidative stress. The mouse hippocampal cell line HT22 was used. Gintonin treatment significantly attenuated IAA-induced reactive oxygen species (ROS) overproduction, ATP depletion, and cell death. However, treatment with Ki16425, an LPA1/3 receptor antagonist, suppressed the neuroprotective effects of gintonin. Gintonin elicited [Ca²⁺]_i transients in HT22 cells. Gintonin-mediated [Ca²⁺]_i transients through the LPA1 receptor-PLC-IP₃ signaling pathway were coupled to increase both the expression and release of BDNF. The released BDNF activated the TrkB receptor. Induction of TrkB phosphorylation was further linked to Akt activation. Phosphorylated Akt reduced IAA-induced oxidative stress and increased cell survival. Our results indicate that gintonin attenuated IAA-induced oxidative stress in neuronal cells by activating the LPA1 receptor-BDNF-TrkB-Akt signaling pathway. One of the gintonin-mediated neuroprotective effects may be achieved via anti-oxidative stress in nervous systems.     

Migration and blooming of waxes to the surface of rubber vulcanizates

When certain substances, notably waxes, are incorporated into rubber during vulcanization, the surface of the vulcanized rubber may subsequently become covered by a film of the substance diffusing out. This phenomenon, known as blooming, depends on the substance being soluble at the vulcanization temperature but only partially soluble at the temperature of blooming. A study has been made using pure waxes in natural rubber vulcanizates with a range of crosslink densities. The mass of bloomed material has been determined as a function of time, and the expected dependence on the square root of the time has been found to hold over the anticipated range. It has been shown that the kinetics of the process cannot be explained simply in terms of the degree of supersaturation of the wax in the rubber, the observed rates being much too low. This appears to be related to the precipitation of the wax in the body of the material. A theory has been developed based on a calculation of the stresses set up around such a precipitated particle and the effect of the consequent free-energy gradient on the rate of diffusion. Comparison with experiment shows satisfactory agreement with the theory.     

OH-initiated heterogeneous aging of highly oxidized organic aerosol

The oxidative evolution ("aging") of organic species in the atmosphere is thought to have a major influence on the composition and properties of organic particulate matter but remains poorly understood, particularly for the most oxidized fraction of the aerosol. Here we measure the kinetics and products of the heterogeneous oxidation of highly oxidized organic aerosol, with an aim of better constraining such atmospheric aging processes. Submicrometer particles composed of model oxidized organics-1,2,3,4-butanetetracarboxylic acid (C(8)H(10)O(8)), citric acid (C(6)H(8)O(7)), tartaric acid (C(4)H(6)O(6)), and Suwannee River fulvic acid-were oxidized by gas-phase OH in a flow reactor, and the masses and elemental composition of the particles were monitored as a function of OH exposure. In contrast to our previous studies of less-oxidized model systems (squalane, erythritol, and levoglucosan), particle mass did not decrease significantly with heterogeneous oxidation. Carbon content of the aerosol always decreased somewhat, but this mass loss was approximately balanced by an increase in oxygen content. The estimated reactive uptake coefficients of the reactions range from 0.37 to 0.51 and indicate that such transformations occur at rates corresponding to 1-2 weeks in the atmosphere, suggesting their importance in the atmospheric lifecycle of organic particulate matter.     

Photophysical properties of near-infrared-emitting Ln(III) complexes with 1-(9-Anthryl)-4,4,4-trifluoro-1,3-butandione (Ln = Nd and Er)

We report the synthesis and photophysical properties of Nd(III) and Er(III) complexes with 1-(9-anthryl)-4,4,4-trifluoro-1,3-butandione (9-ATFB). The complexes of [Nd(9-ATFB)4]- and [Er(9-ATFB)4]- produced sensitized near-infrared (NIR) luminescence via the excitation of anthracene. This suggests that the intramolecular energy transfer occurred from the singlet excited state of anthracene to the resonance levels of the metal ions, since the phosphorescence of anthracene is forbidden under normal conditions. The observed quantum yield of the visible luminescence showed that the energy transfer is more efficient for [Nd(9-ATFB)4]- than for [Er(9-ATFB)4]-. The lifetimes of the NIR luminescence of the complexes were in the microsecond range. The quantum yields of the sensitized NIR of the complexes were estimated using the lifetime and the energy-transfer quantum yield.     

Synthesis of nanobranched TiO2 nanotubes and their application to dye-sensitized solar cells

Nanobranched TiO₂ nanotubes (TONTs) were synthesized by a sol–gel dipping method for the formation of seed layer, followed by a solution-phase deposition process. The different concentrations of seed solution influence the density of nanobranches on the top surface of TONT, achieving complete surface coverage of nanobranches in 10 mM TiCl₄ seed solution relative to 5 mM TiCl₄ seed solution. With a control sample of bare TONT, the nanobranched TONTs were explored as a photoanode for dye-sensitized solar cells (DSSCs). In the 5 mM TiCl₄ seed solution, the nanotree-shaped branches were sporadically formed on the top surface of TONT, with little effect on the photocurrent-voltage (J–V) properties, while in the 10 mM TiCl₄ seed solution, J_sc and fill factor increased, which may have been on account of the increased surface area and light scattering effect from rutile nanobranches, whereas the fill factor may be also increased by the electron transport property, leading to the degraded charge recombination. Accordingly, the nanobranched TONT showed 33% improved efficiency compared to bare TONT.