Time-frequency analysis for pulse driven ultrasonic microscopy for biological tissue characterization

The authors have proposed a new type of ultrasonic microscopy for biological tissue characterization. The system is driven by a nanosecond pulse voltage, the generated acoustic wave being reflected at the front and rear side of the sliced tissue. In this report, a time-frequency analysis was applied to determine the sound speed thorough the tissue. Frequency dependence of sound speed was obtained with a myocardium of a rat sliced into 10 microm. As the reflected waveform had a significant amount of oscillating component, the waveform was once subjected to the deconvolution process. As the result, two reflections were clearly separated in time domain. Then these two reflections were separately analyzed by time-frequency analysis. Each reflection was extracted by using a proper window function. Phase angles of these reflections at the same frequency were compared. A sound speed micrograph at an arbitrary frequency in between 50 and 150 MHz was successfully obtained. A tendency was found that the sound speed slightly increases with frequency.     

Preparation of organic-inorganic composites containing rod-like phthalocyanine polymers

Sol-gel polymerization of tetraethoxysilane in the presence of amphiphilic phthalocyanine polymer 2 produced organic-inorganic composites with the rod-like phthalocaynine polymers incorporated within ordered hexagonal channels.     

Selective ligation to sterically isolated metallophthalocyanines

A new class of sterically hindered phthalocyanine has been synthesized and characterized. Pentaphenylbenzene units were introduced at the periphery of each phthalocyanine to yield a sterically protected metal center. The attachment of the bulky oligophenylbenzene units resulted in the complete isolation of individual MPc molecules. The pockets around a cobalt center affect selectivity in the ligation of pyridines that have different sizes and shapes.     

Magnetic circular dichroism study of directly fused porphyrins.

The magnetic circular dichroism (MCD) spectra of doubly and triply linked fused bisporphyrins (2MD and 2MT, M = Ni, Zn, Cu, Pd, and H2) and triply linked higher oligomers (3ZnT and 4ZnT) have been measured, and their Q-bands assigned based on the results of INDO/s calculations. In contrast to the Faraday A term observed for the Q(0,0) band of Ni(II) tetraphenylporphyrin, a single positive Faraday B term was observed for the lowest energy transition of the fused systems. The calculations indicated that the molecular orbitals (MOs) of the directly fused porphyrins consist of linear combinations of the constituent monomeric MOs, and that the effect of lowering the symmetry is always larger on the lowest unoccupied molecular orbital (LUMO) than on the highest occupied molecular orbital (HOMO). On the basis of Michl's perimeter model, these features can be correlated with the observed positive MCD signs in the near infrared region. A weak absorption band at 600-700 nm for the fused dimers can be assigned to a short-axis polarized Q transition.     

Strong lateral growth and crystallization via two-dimensional allotropic transformation of semi-metal Bi film

Two-dimensional (2D) nano-objects, such as metallic nanofilms are the most fundamental building blocks for nanoelectronics devices. However, the fabrication of highly ordered nanofilms has been difficult because of well known Stranski-Krastanov growth, which results in rough growth front and high density grains. Here we report on the unusual high-quality film growth of Bi on a Si surface with atomic-level surface/interface smoothness and high film crystallinity. The formation of a newly discovered 2D allotrope was clarified to initiate its strong 2D growth. Above several-monolayer thickness, the 2D allotrope transforms into a single-crystalline film with bulk-like layered structure. Our study unveils the atomistic growth process of nano-sized Bi, and the obtained knowledge here will be generally applicable for the fabrication of various nano-devices using this intriguing material that shows rich thermal, magnetic, electronic properties in nanometer scale.     

Monolithic silica spin column extraction and simultaneous derivatization of amphetamines and 3,4-methylenedioxyamphetamines in human urine for gas chromatographic-mass spectrometric detection

A simple, sensitive, and specific method with gas chromatography-mass spectrometry was developed for simultaneous extraction and derivatization of amphetamines (APs) and 3,4-methylenedioxyamphetamines (MDAs) in human urine by using a monolithic silica spin column. All the procedures, such as sample loading, washing, and elution were performed by centrifugation. APs and MDAs in urine were adsorbed on the monolithic silica and derivatized with propyl chloroformate in the column. Methamphetamine-d₅ was used as an internal standard. The linear ranges were 0.01-5.0 μg mL⁻¹ for methamphetamine (MA) and 3,4-methylenedioxymethamphetamine (MDMA) and 0.02-5.0 μg mL⁻¹ for amphetamine (AP) and 3,4-methylenedioxyamphetamine (MDA) (coefficient of correlation ≧0.995). The recovery of APs and MDAs in urine was 84-94%, and the relative standard deviation of the intra- and interday reproducibility for urine samples containing 0.1, 1.0, and 4.0 μg mL⁻¹ of APs and MDAs ranged from 1.4% to 13.6%. The lowest detection limit (signal-to-noise ratio ≧ 3) in urine was 5 ng mL⁻¹ for MA and MDMA and 10 ng mL⁻¹ for AP and MDA. The proposed method can be used to perform simultaneous extraction and derivatization on spin columns that have been loaded with a small quantity of solvent by using centrifugation.     

Catalytic activity of carbon-supported iridium oxide for oxygen reduction reaction as a Pt-free catalyst in polymer electrolyte fuel cell

Iridium oxide supported on Vulcan XC-72 carbon black (IrO₂/C) as a cathode catalyst for polymer electrolyte fuel cell (PEFC) has been characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD) measurement. The IrO₂ particles were 8-160 nm in diameter. The oxygen electroreduction activity was studied by cyclic voltammetry (CV). It was found that IrO₂/C had high oxygen reduction reaction (ORR) activity. The performance of the membrane electrode assemble (MEA) was also tested in a single PEFC and showed that IrO₂/C catalyst would be potential candidates for use as cathode catalyst in PEFC.     

“Click polyester”: Synthesis of polyesters containing triazole units in the main chain via safe and rapid “click” chemistry and their properties

Click Cu(I)‐catalyzed polymerizations of diynes that contained ester linkages and diazides were performed to produce polyesters (click polyesters) of large molecular weights [(～1.0–7.0 ) × 10⁴], that contained main‐chain 1,4‐disubstitued triazoles in excellent yields. Incorporation of triazole improved the thermal properties and magnified the even‐odd effect of the methylene chain length. We also found that, by changing the positions of the triazole rings, the thermal properties of the polyesters could be controlled. The use of in situ azidation was a safe reaction, as explosive diazides are not used. In addition, the microwave heating was found to accelerate the polymerization rates. This is the first study that has applied click chemistry for the synthesis of a series of polyesters. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4207–4218, 2010     

Theoretical study on quantum dynamics of bose system interacting with photon field

We investigate the quantum dynamics of two‐boson and two‐level systems interacting with a one‐mode photon field. The time evolution of the population for each state is calculated in terms of the Jaynes–Cummings model. We find the collapses and revivals of the order parameter for the Bose–Einstein condensation. © 2001 John Wiley & Sons, Inc. Int J Quantum Chem 84: 401–408, 2001     

Surface pre-melting and surface flattening of Bi nanofilms on Si(1 1 1)-7 × 7

We report on the in situ observation of temperature-driven drastic morphology evolution and surface pre-melting of the Bi(0 0 1) nanofilm deposited on the Si(1 1 1)-7 × 7 surface by use of spot-profile-analyzing low-energy electron diffraction (SPA-LEED). Surface step density of the single-crystalline, epitaxial Bi(0 0 1) film decreases above 350 K in a critical manner. On annealed Bi(0 0 1) films, we have detected surface pre-melting with a transition temperature of 350 K, which yields reversible diffraction intensity drop in addition to the harmonic Debye-Waller behavior. The observed surface flattening of the as-deposited film is driven by the increased amount of mobile adatoms created through the surface pre-melting.