A Kinetic Study of the Thermal Degradation of Nylon-6/Attapulgite Nanocomposites

The thermal degradation behavior of nylon-6 (PA6) and PA6/attapulgite (ATP) nanocomposites was investigated by thermogravimetric analysis under non-isothermal conditions at various heating rates in nitrogen. It is suggested that during thermal degradation, ATP, as a protective barrier, can slow down degradation of polymer, but the catalytic effects of structural water and hydroxyl groups may accelerate the degradation of PA6. The combination of these two effects determined the final thermal stability of nanocomposites. The apparent activation energies of the samples were evaluated by the Kissinger and Flynn–Wall–Ozawa methods. The results showed that the presence of ATP adversely affected the thermal stability of PA6. The degradation activation energies of PA6/ATP nanocomposites decreased monotonically with increase in ATP content; thus, it is suggested that the ATP has a disadvantageous effect on the thermal stability of PA6.     

Titanium dioxide nanorod-based amperometric sensor for highly sensitive enzymatic detection of hydrogen peroxide

Titanium dioxide nanorods (TNR) were grown on a titanium electrode by a hydrothermal route and further employed as a supporting matrix for the immobilization of nafion-coated horseradish peroxidase (HRP). The strong electrostatic interaction between HRP and TNR favors the adsorption of HRP and facilitates direct electron transfer on the electrode. The electrocatalytic activity towards hydrogen peroxide (H₂O₂) was investigated via cyclic voltammetry and amperometry. The biosensor exhibits fast response, a high sensitivity (416.9 μA·mM⁻¹), a wide linear response range (2.5 nM to 0.46 mM), a detection limit as low as 12 nM, and a small apparent Michaelis-Menten constant (33.6 μM). The results indicate that this method is a promising technique for enzyme immobilization and for the fabrication of electrochemical biosensors.

A TiO₂ nanorod film was directly grown on Ti substrate by a hydrothermal route, and was further employed for a supporting matrix to immobilize horseradish peroxidase as a biosensor electrode. The as-prepared hydrogen peroxide biosensor based on Nafion/HRP/TNR/Ti electrode exhibited fast response and excellent electrocatalytic activity toward H₂O₂, i.e., a high sensitivity (416.9 μA mM⁻¹), a wide linear range (2.5 × 10⁻⁸ to 4.6 × 10⁻⁴ M) with a low detection limit (0.012 μM) and a small apparent Michaelis-Menten constant (33.6 μM).

     

Titanium dioxide nanorod-based amperometric sensor for highly sensitive enzymatic detection of hydrogen peroxide

Titanium dioxide nanorods (TNR) were grown on a titanium electrode by a hydrothermal route and further employed as a supporting matrix for the immobilization of nafion-coated horseradish peroxidase (HRP). The strong electrostatic interaction between HRP and TNR favors the adsorption of HRP and facilitates direct electron transfer on the electrode. The electrocatalytic activity towards hydrogen peroxide (H₂O₂) was investigated via cyclic voltammetry and amperometry. The biosensor exhibits fast response, a high sensitivity (416.9 μA·mM^?1), a wide linear response range (2.5 nM to 0.46 mM), a detection limit as low as 12 nM, and a small apparent Michaelis-Menten constant (33.6 μM). The results indicate that this method is a promising technique for enzyme immobilization and for the fabrication of electrochemical biosensors.

The stereoselective synthesis of tetrahydrothiopyrano[2,3-b]indole skeletons via tandem reaction of indoline-2-thiones to Baylis–Hillman adduct acetates

Indoline-2-thiones (5) were applied as 1,3-dinucleophiles in a tandem reaction with Baylis–Hillman adduct acetates (4) to give novel tetrahydrothiopyrano[2,3-b]indole skeletons (6). The effect of different solvents, bases, and catalysts on the yields and stereochemical outcome was studied in detail. The results indicated that acetonitrile as solvent and K₂CO₃ as base, under reflux conditions, were the optimum conditions. Products 6a–6l were obtained in high diastereoselectivity and yield (up to 94%).     

Biodegradation behavior of poly(butylene adipate-co-terephthalate) (PBAT), poly(lactic acid) (PLA), and their blend under soil conditions

Poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) were mixed at a ratio of 40:60, extruded to form granules and cast into film; then, the PLA, PBAT, and PBAT/PLA film samples were buried in real soil environments. The residual degraded samples were taken regularly from the soil and analyzed by SEM, DSC, TGA, IR spectroscopy and elemental analysis. The analyses showed that PBAT and PLA had different biodegradation mechanisms. Further, the melting temperature and the melting point change of the various components in the PBAT/PLA blend before and after the biodegradation essentially followed the process of the changes in the respective single polymers. After biodegradation, the carbon atom content in the molecular structure of the PBAT, PLA, and PBAT/PLA samples decreased, while the oxygen atom content increased, indicating that the samples indeed degraded. The biodegradation rates of PBAT and PLA in the PBAT/PLA blend were not the same as those for the single materials.     

三氟甲基芳基硫醚的合成

三氟甲基芳基硫醚由于具有高疏水性和亲脂性,在医药、农用化学品及材料科学中有着重要的应用。合成含三氟甲硫基的芳香化合物已成为有机氟化学领域的研究热点之一。本文从间接法和直接法两方面综述了向分子中引入三氟甲硫基的相关研究,包括新的三氟甲硫基化试剂以及新的合成方法在制备三氟甲基芳基硫醚中的应用,最后讨论了这些方法存在的问题,并为探索新型的、更加经济的三氟甲硫基化反应提供参考。     

基于6-羟基-2-吡啶基膦酸配体的铜配合物的合成、结构及磁性

在水热条件下, 以6-羟基-2-吡啶基膦酸为主配体, 4, 4′-联吡啶(bpy)及1, 2-二(4-吡啶基)乙烯(bpe)为桥联配体, 合成了2个铜膦酸配位聚合物[Cu₃(L)₂(bpy)₂(H₂O)₂]· 2H₂O (1), [Cu₃(L)₂(bpy)₂(H₂O)₃]· 2H₂O (2)。配合物1中, Cu²⁺离子由膦酸配体连接成一条链, 该链由bpy桥联成二维层, 层与层之间通过氢键作用构成三维结构。配合物2与配合物1是同构的, 桥联配体是bpe。磁性研究表明, 配合物1与2中铜离子之间存在反铁磁性耦合。     

New Dithiocarbamate Compounds from Organotin(IV)

Abstract

A series of new organotin(IV) dithiocarbamate compounds of type R_nSn (S₂CNR′R″)_4-n (n = 2, 3; R = dimethyl, dibutyl, diphenyl, triphenyl and tert-butyl; R′ = methyl, ethyl, benzyl; R″ = isopropyl, ethyl, ethanol) have been successfully synthesized. Elemental analysis showed that the percentage of the elements conformed to the general formula of these compounds. The important peaks of the infrared spectra for the stretching mode ν(C?N), ν(C?S), and v(Sn-S) for the compounds were observed in the area of 1440–1480 cm^?1, 940–1000 cm^?1, and 340–90 cm^?1, respectively. The ¹³C NMR spectra showed the most important peak for N¹³CS₂ chemical shifts were observed in the range 190–210 ppm. X-ray single crystal studies for several structures of these compounds showed that the chelating mode of the dithiocarbamate groups to the central tin atoms were either bidentate or anisobidentate.

GRAPHICAL ABSTRACT     

Synthesis,Crystal Structure,and Fungicidal Activity of a Novel 1,2,3-Thiadiazole Compound

Abstract

A new 1,2,3-thiadiazole compound, C₁₈H₁₈Cl₂N₄O₂S, has been synthesized and the crystal structure was determined by single crystal X-ray diffraction study. The fungicidal activity of the title compound was determined and the results showed that it displays moderate fungicidal activity.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.