Electrochemical characterisation of a Zn/(PEO)4ZnCl2/Nb2O5 solid-state cell

The (PEO)₄ZnCl₂ electrolyte (PEO, polyethylene oxide) was studied in view of its potential application in a solid-state rechargeable zinc cell. The electrochemical stability window was established, and decomposition voltage values between 3.19 (20 °C) and 1.44 V (150 °C) were estimated. Cyclic voltammetry studies using a Pt/(PEO)₄ZnCl₂/Pt cell indicated reversibility of the Zn²⁺/Zn couple at the electrode/electrolyte interface. Laboratory cells Zn(−)/(PEO)₄ZnCl₂/Nb₂O₅(+) were assembled and studied at 55 °C, under various discharge current densities. Results of cell discharge profiles, capacity values, charge–discharge cycles and cell stabilities are reported.     

Phosphorus Containing Tri-and Hexamacrocycles

Abstract

Multisite receptors containing more than two macrocyclic cavities. despite of the fact that their syntheses, most often, require sophisticated pathways, arc of very high interest since they may allow new insights into ion channel transfer, ion conduction.[1] We report here a method which combine simple reactions, high yields (80%), with easily prepared starting reagents[2], of two new polymacrocyclic system, a tri-(r) and an hexamacrocyck(II). They were obtained by a condensation reaction between 4-formylbenzo-15-crown-5 (3 or 6 quiv, respectively) and phosphouihydrazide (1 equiv.) or hexahydrazide (1 equiv.) in tetrahydrofuran.     

Motion planning and actuator specialization in the control of active-flexible link robots

Trajectory planning is a well-known open-loop control strategy to minimize residual vibrations in point-to-point tasks of systems featuring mechanical flexibility. However, the major drawback of open-loop control is its limitation in coping with modeling uncertainty. In this paper a novel approach to trajectory planning based on LQR theory is proposed and applied to a single flexible link robot. To improve performance under parameter uncertainty the strategy is combined with collocated vibration control through piezoelectric actuation of the link. This combination raises the issue of the roles and the contribution of each actuator type to the overall performance of the maneuver. An actuator specialization is proposed where the joint controller is responsible for the gross vibrationless motion of the link, while the link actuators are expected to deal only with residual vibrations that may arise from modeling errors. Simulation and experimental results validate the trajectory planning methodology and the combination of the open-loop strategy with collocated vibration control.     

Oxidation stability of various Ti-alloys

Since titanium metal first became a commercial reality in 1950, corrosion resistance has been an important consideration in its selection as an engineering structural material. Titanium has gained acceptance in many media where its corrosion resistance and engineering properties have provided the corrosion and design engineer with a reliable and economic material. Titanium, like any other metal, is subject to corrosion in environments of air, oxygen, moisture, and so on. In this work, high-temperature stability of Ti and various Ti-alloys (by ASTM standard) was investigated. The best results showed that for Ti-Gr.5 alloy, the oxidation at 800 °C was 3.39% and at 900 °C 8.35%. For the comparison, commercial pure Ti-alloys Ti-Gr.2 and Ti-Gr.37 containing Al were used, whereas the oxidation resistance was much worse.     

Effect of Molecular Structure on Complexation Between Acidic- and Basic-Polypeptides in Solution

Abstract

Interpolymer complex formation between basic polypeptides, poly(L- proline) Form I [PLP(I)], Form II [PLP(II)] and poly-4-hydroxy-L-proline (PHLP), and acidic polypeptides, poly(L-glutamic acid) (PLGA), poly(D- glutamic acid) (PDGA) and poly(L-aspartic acid) (PLAA), has been studied in water-methanol (1:2 v/v) mixed-solvent by viscometry, potentiometry, light scattering and circular dichroism (CD) measurements. It has been found that polymer complexes between basic- and acidic- polypeptides are formed via hydrogen bonding with a stoichiometric ratio of basic/acidic polypeptides =1:2 (in unit mole ratio) and that PLP(II) forms polymer complex more favorably with PLGA than with PLAA, and the complex of PLP(II) with PLGA is also more favorable than the complex formation of PHLP with PLGA. In addition, the complex formation is highly dependent on the conformation, especially the optical structure of the component polymers, i.e., the stereoselective complexation is observed. The PLGA having a right-handed helix at pH 3.2 formed the complex favorably and quickly with left-handed helix PLP(II), whereas PDGA having a left-handed helix at pH 3.2 favorably formed the complex with right-handed helix PLP(I).     

Development and validation studies for determination of phenylpropanoid‐substituted flavan‐3‐ols in semipurified extract of Trichilia catigua by high‐performance liquid chromatography with photodiode array detection

The phenolic compounds are the main phytochemical constituents of the bark of Trichilia catigua and are commonly used for medicinal purposes. An HPLC method for the simultaneous quantification of phenolic compounds (procyanidin B2 (PB2), epicatechin (EPC), chinchonains Ia, Ib, IIa, IIb, catechin, and chrologenic acid) in T. catigua extract was developed and validated. A suitable chromatographic system was selected, which uses a gradient elution with methanol/ACN (75:25), and water both with 0.05% TFA, as mobile phase, column Luna, 280 nm, and flow 0.4 mL/min. Validation of the analytical method was based on the parameters: linearity, precision, LODs and LOQs, accuracy, robustness, and stability. The method showed linearity for PB2 and EPC, in the range 10–120 μg/mL with good correlation coefficients (>0.996). For precision, the repeatability ranged from 1.89 to 3.23%, and the values for accuracy for PB2 and EPC were 95 and 89%, respectively. The LODs and LOQs for PB2 were 1.36 and 4.12 μg/mL, and for EPC were 2.18 and 6.61 μg/mL, respectively. The method was robust under the conditions employed. The proposed method could be employed for quality assessment of T. catigua, as well as pharmaceutical products.     

Molecular imprinted polymers for separation science: A review of reviews

Molecular imprinted polymer is an artificial receptor made by imprinting molecules of a template in a polymer matrix followed by removing the template molecules via thorough washing to give the permanent template grooves. They show favored affinity to the template molecule compared to other molecules, and this property is the basic driving force for such diverse application of this techniques. Such techniques have been increasingly employed in a wide scope of applications such as chromatography, sample pretreatment, purification, catalysts, sensors, and drug delivery, etc., mostly in bioanalytical areas. A major part of them is related to development of new stationary phases and their application in chromatography and sample pretreatment. Embodiments of molecular imprinted polymer materials have been carried out in a variety of forms such as irregularly ground particles, regular spherical particles, nanoparticles, monoliths in a stainless steel or capillary column, open tubular layers in capillaries, surface attached thin layers, membranes, and composites, etc. There have been numerous review articles on molecular imprinted polymer issues. In this special review, the reviews in recent ca. 10 years will be categorized into several subgroups according to specified topics in separation science, and each review in each subgroup will be introduced in the order of date with brief summaries and comments on new developments and different scopes of prospects. Brief summaries of each categories and conclusive future perspectives are also given.     

Performance of hydrophobic interaction ligands for human membrane‐bound catechol‐O‐methyltransferase purification

Despite of membrane catechol‐O‐methyltransferase (MBCOMT, EC 2.1.1.6) physiological importance on catecholamines’ O‐methylation, no studies allowed their total isolation. Therefore, for the first time, we compare the performance of three hydrophobic adsorbents (butyl‐, epoxy‐, and octyl‐Sepharose) in purification of recombinant human COMT (hMBCOMT) from crude Brevibacillus choshinensis cell lysates to develop a sustainable chromatographic process. Hydrophobic matrices were evaluated in terms of selectivity and hMBCOMT's binding and elution conditions. Results show that hMBCOMT's adsorption was promoted on octyl and butyl at ≤375 mM NaH₂PO_4, while on epoxy higher concentrations (>850 mM) were required. Additionally, hMBCOMT's elution was promoted on epoxy, butyl, and octyl using respectively 0.1–0.5, 0.25–1, and 1% of Triton X‐100. On butyl media, a stepwise strategy using 375 and 0 mM NaH₂PO₄, followed by three elution steps at 0.25, 0.7 and 1% Triton X‐100, allowed selective hMBCOMT isolation. In conclusion, significant amounts of MBCOMT were purified with high selectivity on a single chromatography procedure, despite its elution occurs on multiple peaks. Although successful applications of hydrophobic interaction chromatography in purification of membrane proteins are uncommon, we proved that traditional hydrophobic matrices can open a promising unexplored field to fulfill specific requirements for kinetic and pharmacological trials.     

A Simple Synthesis of 2-Phenylethynyl- and 2-Phenylthioethynyl-2-substituted Phenylacetonitriles Under Phase-Transfer Catalytic (PTC) Conditions

The efficient synthesis of 2-phenylethynyl- or 2-phenylthioethynyl-2-substituted phenylacetonitriles 4 and 5 from nitriles 3 and substituted dichloroethenes 1 or 2, respectively, in the presence of 50% aqueous sodium hydroxide and tetrabutylammonium hydrogen sulphate (TBAHS) as a catalyst (phase-transfer catalysis, PTC), has been accomplished.