An optical biosensor for dichlovos using stacked sol-gel films containing acetylcholinesterase and a lipophilic chromoionophore

An optical biosensor consisting of a chromoionophore (ETH5294) (CM) doped sol-gel film interfaced with another sol-gel film immobilized with acetylcholinesterase (AChE) was employed to detect the insecticide dichlorvos. The main advantage of this optical biosensor is the use of a sol-gel layer with immobilized CM that possesses lipophilic property. The highly lipophilic nature of the CM and its compatibility with the sol-gel matrix has prevented leaching, which is frequently a problem in optical sensor construction based on pH indicator dyes. The immobilization of the indicator and enzyme was simple and need no chemical modification. The CM layer is pH sensitive and detects the pH changes of the acetylcholine chloride (AChCl) substrate when hydrolyzed by AChE layer deposited above. In the absence of the AChE layer, the pH response of the CM layer is linear from pH 6 to 8 (R² = 0.98, n = 3) and it showed no leaching of the lipophilic chromoionophore. When the AChE layer is deposited on top, the optical biosensor responds to AChCl with a linear dynamic range of 40-90 mM AChCl (R² = 0.984, n = 6). The response time of the biosensor is 12 min. Based on the optimum incubation time of 15 min, a linear calibration curve of dichlorvos against the percentage inhibition of AChE was obtained from 0.5 to 7 mg/L of dichlorvos (17-85% inhibition, R² = 0.991, n = 9). The detection limit for dichlorvos was 0.5 mg/L. The results of the analysis of 1.7-6.0 mg/L of dichlorvos using this optical biosensor agreed well with a gas chromatography-mass spectrometry detection method.     

Isolation and characterisation of new bio-active compounds from Euphorbia cornigera: cytotoxic ingenol esters

The aerial parts of Euphorbia cornigera Boiss., on extraction with MeOH, yielded new bio-active constituents (1, 2) and known compounds (3 and 4) after MTT cytotoxicity assay-guided fractionation and chromatographic separation were conducted. From the aerial parts of E. cornigera Boiss., new bio-active constituents were extracted in methanol. The extract was partitioned in different organic solvents and the ethylacetate-soluble portion was subjected to Craig's distribution. The MTT cytotoxicity assay-guided chromatographic separation yielded four (1-4), out of which two (1, 2) were new and two known (3, 4) bio-active compounds, and they are reported for the first time from this source. Their structure and relative stereochemistry were established by analysing spectroscopic and mass measurement data. The isolates were named as: 13-O-[(2Z ,4 E ,6 Z)]-deca-2,4,6-trienoylingenol (1), 13-O-( 2 Z ,4 E ,6 Z)-deca-2,4,6-trienoyl-20-O-angeloylingenol (2), 13-O-dodecanoyl-20-O-hexanoylingenol (3) and 3-O-(2,3-dimethylbutanoyl)-13-O-dodecanoyl-20-O-hexadecanoylingenol (4). Literature revealed that compounds 1 and 2 are new metabolites, while 3 and 4 are known, and are reported for the first time from this source. Cytotoxicities of isolates were evaluated in terms of IC(50) against RAW and HT-29 cell lines through MTT assay using ambrucin hydrochloride as a control. Compound 3 showed more activity than control, while 1, 2 and 4 were moderate.     

Coordination versatility of tridentate pyridyl aroylhydrazones towards iron: tracking down the elusive aroylhydrazono-based ferric spin-crossover molecular materials

The two potentially tridentate and monoprotic Schiff bases acetylpyridine benzoylhydrazone (HL(1)) and acetylpyridine 4-tert-butylbenzoylhydrazone (HL(2)) demonstrate remarkable coordination versatility towards iron on account of their propensity to undergo tautomeric transformations as imposed by the metal centre. Each of the pyridyl aroylhydrazone ligands complexes with the ferrous or ferric ion under strictly controlled reaction conditions to afford three six-coordinate mononuclear compounds [Fe(II)(HL)(2)](ClO(4))(2), [Fe(II)L(2)] and [Fe(III)L(2)]ClO(4) (HL = HL(1) or HL(2)) displaying distinct colours congruent with their intense CT visible absorptions. The synthetic manoeuvres rely crucially on the stoichiometry of the reactants, the basicities of the reaction mixtures and the choice of solvent. Electrochemically, each of these iron compounds exhibits a reversible metal-centred redox process. By all appearances, [Fe(III)(L(1))(2)]ClO(4) is one of only two examples of a crystallographically elucidated iron(III) bis-chelate compound of a pyridyl aroylhydrazone. Several pertinent physical measurements have established that each of the Schiff bases stabilises multiple spin states of iron; the enolate form of these ligands exhibits greater field strength than does the corresponding neutral keto tautomer. To the best of our knowledge, [Fe(III)(L(1))(2)]ClO(4) and [Fe(III)(L(2))(2)]ClO(4) are the first examples of ferric spin crossovers of aroylhydrazones. Whereas in the former the spin crossover (SCO) is an intricate gradual process, in the latter the (6)A(1)?(2)T(2) transition curve is sigmoidal with T(?)～280 K and the SCO is virtually complete. As regards [Fe(III)(L(1))(2)]ClO(4), M?ssbauer and EPR spectroscopic techniques have revealed remarkable dependence of the spin transition on sample type and extent of solvation. In frozen MeOH solution at liquid nitrogen temperature, both iron(III) compounds exist wholly in the doublet ground state.     

Promising half-metallic ferromagnetism in double perovskites Ba2VTO6 (T=Nb and Mo): Ab-initio LMTO-ASA investigations

The electronic and magnetic properties of new ordered vanadium-based double perovskite oxides Ba₂VTO₆ (T=Nb and Mo) have been investigated using the ab-initio linear muffin-tin orbitals method with the atomic-sphere approximation (LMTO-ASA). The calculations performed by using the local spin-density approximation with on-site Coulomb interaction (LSDA+U) style. The self-consistent band structure calculations predict half-metallic ferromagnetic (HM-FM) ground states with total spin magnetic moments of 2.1021 μ_B and 3.0633 μ_B per formula unit cell for Ba₂VNbO₆ and Ba₂VMoO₆, respectively. HM-FM nature in two compounds organizes from the ddpπ-superexchange interactions 3d-t_2g²–O (2p)–4d-t_2gⁿ (n=0 or 1), conformity with Zener–Goodenough–Kanamori rules.     

The influence of Sr and Fe on the conductance of magnetoresistant compounds

Single-phase giant magnetoresistance (GMR) compounds were prepared by doping the parent compound, NdMnO₃, with Sr at Nd sites. The resistivity of the doped samples showed two prominent regions (Δρ/ΔT < 0, insulating and Δρ/ΔT > 0, metallic). The doped samples exhibited an enhancement in double exchange (DE) interactions causing an increase in T _c (transition temperature). Magnetic field decreased the resistance of all the samples because of the suppression of spin fluctuations and an increase in disorder in the system. The polaron and variable range hopping (VRH) models were good for studying the transport mechanism of electrons and understand their behavior at T > T _c.     

Effects of heavy metals and oxalate on the zeta potential of magnetite

Zeta potential is a function of surface coverage by charged species at a given pH, and it is theoretically determined by the activity of the species in solution. The zeta potentials of particles occurring in soils, such as clay and iron oxide minerals, directly affect the efficiency of the electrokinetic soil remediation. In this study, zeta potential of natural magnetite was studied by conducting electrophoretic mobility measurements in single and binary solution systems. It was shown that adsorption of charged species of Co(2+), Ni(2+), Cu(2+), Zn(2+), Pb(2+), and Cd(2+) and precipitation of their hydroxides at the mineral surface are dominant processes in the charging of the surface in high alkaline suspensions. Taking Pb(2+) as an example, three different mechanisms were proposed for its effect on the surface charge: if pH<5, competitive adsorption with H(3)O(+); if 56, precipitation of heavy metal hydroxides prevails. Oxalate anion changed the associated surface charge by neutralizing surface positive charges by complexing with iron at the surface, and ultimately reversed the surface to a negative zeta potential. Therefore the adsorption ability of heavy metal ions ultimately changed in the presence of oxalate ion. The changes in the zeta potentials of the magnetite suspensions with solution pH before and after adsorption were utilized to estimate the adsorption ability of heavy metal ions. The mechanisms for heavy metals and oxalate adsorption on magnetite were discussed in the view of the experimental results and published data.     

The use of umbelliferone in the synthesis of new heterocyclic compounds

New coumarin derivatives, namely 7-[(5-amino-1,3,4-thiadiazol-2-yl)methoxy]-2H-chromen-2-one, 5-[(2-oxo-2H-chromen-7-yloxy)methyl]-1,3,4-thiadiazol-2(3H)-one, 2-[2-(2-oxo-2H-chromen-7-yloxy)acetyl]-N-phenylhydrazinecarbothioamide, 7-[(5-(phenylamino)-1,3,4-thiadiazol-2-yl)methoxy]-2H-chromen-2-one and 7-[(5-mercapto-4-phenyl-4H-1,2,4-triazol-3-yl)methoxy]-2H-chromen-2-one were prepared starting from the natural compound umbelliferone. The newly synthesized compounds were characterized by elemental analysis and spectral studies (IR, 1H-NMR and 13C-NMR).     

The effect of harvest periods on the chemical compositions of essential oils of sage (Salvia aucheri L.) leaves

The essential oils of sage leaves (Salvia aucheri Bentham var. canescens Boiss. & Heldr.), growing wild in South Anatolia, were extracted by hydrodistillation and analysed by GC and GC-MS. The percentage yields of the essential oils from sage leaves harvested at different years were 1.0%, 1.3%, 1.3%, 1.0%, 1.4%, 1.5% and 1.2%, respectively. In this study, 1,8-cineole, camphre, camphene α-pinene and β-pinene were identified as the major components of sage leaves collected at different periods. The main constituents of sage oil collected over the years were 1,8-cineole (35.01-48.06%), camphre (13.58-23.92%), camphene (6.77-8.82%), α-pinene (5.79-8.54%) and β-pinene (4.32-6.28%).     

Microwave-assisted and conventional synthesis of new phthalocyanines containing 4-(p-fluorophenyl)-3-methyl-4,5-dihydro-1H-1,2,4-triazol-5-one moieties

New metal-free and metal (Zn, Ni, Cu and Co) phthalocyanines containing 4-(p-fluorophenyl)-3-methyl-4,5-dihydro-1H-1,2,4-triazol-5-one moiety have been prepared from 1-(3,4-dicyanophenyl)-4-(p-fluorophenyl)-3-methyl-4,5-dihydro-1H-1,2,4-triazol-5-one by both conventional and microwave-assisted methods. All of these compounds are soluble in CHCl₃, DMF and DMSO. The new compounds have been characterized by elemental analysis, IR, NMR, UV-Vis spectroscopies. The crystal structures of compounds I and II were also determined by the single crystal diffraction technique.     

A new Approach for the Voltammetric Sensing of the Phytoestrogen Genistein at a Non-modified Boron-doped Diamond Electrode

An effective electrochemical sensor was constructed using an unmodified boron-doped diamond electrode for determination of genistein by square-wave voltammetry. Cyclic voltammetric investigations of genistein with HClO₄ solution indicated that irreversible behavior, adsorption-controlled and well-defined two oxidation peaks at about +0.92 (P_A1) & +1.27 V (P_A2). pH, as well as supporting electrolytes, are important in genistein oxidations. Quantification analyses of genistein were conducted using its two oxidation peaks. Using optimized experiments as well as instrumental conditions, the current response with genistein was proportionately linear in the concentrations range of 0.1 to 50.0 μg mL⁻¹ (3.7×10⁻⁷−1.9×10⁻⁴ mol L⁻¹), by the detection limit of 0.023 μg mL⁻¹ (8.5×10⁻⁸ mol L⁻¹) for P_A1 and 0.028 μg mL⁻¹ (1.1×10⁻⁷ mol L⁻¹) for P_A2 in 0.1 mol L⁻¹ HClO₄ solution (in the open circuit condition at 30 s accumulation time). Ultimately, the developed method was effectively applied to detect genistein in model human urine samples by using its second oxidation peak (P_A2).