Effect of pyrolysis characteristics on ignition mechanism and NO emission of pulverized coal during oxy-fuel combustion

The effect of pyrolysis behavior on the ignition mechanism was investigated by thermogravimetric technique. The pyrolysis tests show that Datong bituminous coal (DT) pyrolyzes earlier and releases volatiles faster than does Guohua bituminous coal (GH). During oxy-fuel combustion, more volatiles accumulated around DT particles can be ignited easily with increasing oxygen concentration which results in the heterogeneous ignition transforming to homogeneous ignition, while for GH, less volatile is released during devolatilization and the coal particles are more likely ignited heterogeneously. After the transformation of ignition mechanism, the ignition temperature of DT decreases significantly, but the combustibility index S is not appreciably affected. The effect of pyrolysis characteristics on NO emissions was studied by a fixed-bed reactor. It is found that compared to GH, DT released NO more quickly and intensively which leads to more fuel-N converting to NO. With the rise in oxygen concentration, the NO yields of both coals reach the peak values at 40 % oxygen concentration and then decline mainly due to the enhanced homogeneous NO reductions at higher oxygen concentration. With the rise in furnace temperature, the NO yields of coal samples increase first and then decrease with a maximum at 900 °C which is possibly a result of the competing reactions of volatile-N oxidation and reduction in the process of NO formation.     

Gold and Carbene Relay Catalytic Enantioselective Cycloisomerization/Cyclization Reactions of Ynamides and Enals

The combined use of gold as transition metal catalyst and N‐heterocyclic carbene (NHC) as organic catalyst in the same solution for relay catalytic reactions was disclosed. The ynamide substrate was activated by gold catalyst to form unsaturated ketimine intermediate that subsequently reacted with the enals (via azolium enolate intermediate generated with NHC) effectively to form bicyclic lactam products with excellent diastereo‐ and enantio‐selectivities. The gold and NHC coordination and dissociation can be dynamic and tunable events, and thus allow the co‐existence of both active metal and carbene organic catalysts in appreciable concentrations, for the dual catalytic reaction to proceed.     

Surface modification of polyolefin separators for lithium ion batteries to reduce thermal shrinkage without thickness increase

Surface chemical modification of polyolefin separators for lithium ion batteries is attempted to reduce the thermal shrinkage, which is important for the battery energy density. In this study, we grafted organic/inorganic hybrid crosslinked networks on the separators, simply by grafting polymerization and condensation reaction. The considerable silicon-oxygen crosslinked heat-resistance networks are responsible for the reduced thermal shrinkage. The strong chemical bonds between networks and separators promise enough mechanical support even at high temperature. The shrinkage at 150 C for 30 min in the mechanical direction was 38.6% and 4.6% for the pristine and present graft-modified separators, respectively. Meanwhile, the grafting organic-inorganic hybrid crosslink networks mainly occupied part of void in the internal pores of the separators, so the thicknesses of the graft-modified separators were similar with the pristine one. The half cells prepared with the modified separators exhibited almost identical electrochemical properties to those with the commercial separators, thus proving that, in order to enhance the thermal stability of lithium ion battery, this kind of grafting-modified separators may be a better alternative to conventional silica nanoparticle layers-coated polyolefin separators.     

Conversion of quassinoids for enhancement of inhibitory effect against Epstein-Barr virus early antigen activation. Introduction of lipophilic side chain and esterification of diosphenol

Introduction of a senecioyl group into shinjulactones B and C, and esterification of the diosphenol moiety in brusatol and brucein A enhanced inhibitory effect against Epstein-Barr virus early antigen activation.     

On-line pretreatment and determination of Pb, Cu and Cd at the μg l level in drinking water by chelation ion chromatography

A novel, highly sensitive method for the simultaneous separation and determination of lead, copper, cadmium and other transition metals in drinking water was achieved by on-line sample pretreatment of chelation ion chromatography. Manganese, which coeluted with cadmium, was oxidized to permanganate by ammonium persulfate before injection. Permanganate, with bulk quantity of alkali, alkaline earth metals, iron and aluminum, was eliminated by pyrophosphoric acid–ammonium acetate buffer solution (pH 5.5), while retaining heavy and transition metals on a selective chelating resin (MetPac CC-1 column). Then, they were disabsorbed and transferred to a sulfonated cation exchanger (TMC-1 column). Finally, the concentrated trace metals were separated on a bifunctional ion-exchange column (CS5A) by a concentration gradient of oxalic acid and sodium nitrate eluents, coupled with post-column spectrophotometric detection with 2-[(5-bromo-2-pyridyl)azo]-5-diethylaminophenol (5-Br-PADAP) at 560 nm. The separation and color-development conditions were optimized. The detection limits for the method (signal-to-noise ratio=3:1) were at or below the μg l⁻¹ level. The results of drinking water analyses were satisfactory.     

Thermochemical hole burning on a series of N-substituted morpholinium 7,7,8,8-tetracyanoquinodimethane charge-transfer complexes for data storage

We demonstrate here the thermochemical hole burning (THB) effect on a series of N-substituted morpholinium 7,7,8,8-tetracyanoquinodimethane charge-transfer (C-T) complexes for ultra-high-density data storage. A correlation between the decomposition temperature of the charge-transfer complex and the threshold voltage of hole burning was observed: the higher the decomposition temperature, the larger the writing threshold value, suggesting the possibility of molecular design for optimizing the hole burning performance. The macroscopic decomposition properties of these charge-transfer complexes were studied by thermal gravimetry combined with mass spectrometry. Theoretical estimation of the temperature rise induced by scanning tunneling microscopy current heating was also conducted, which indicated that the maximum temperature certainly exceeds the decomposition temperatures of these C-T complexes. These observations are consistent with the thermochemical hole burning mechanism.     

Enhancement of pairing correlation by t' in the two-dimensional extended t-J model

We investigate the effects of the next-nearest-neighbor (t') and the third-nearest-neighbor (t") hopping terms on superconductivity correlation in the 2D hole-doped extended t-J model based on the variational Monte Carlo, mean-field calculation and exact diagonalization method. Despite the diversity of the methods employed, the results all point to a consistent conclusion: While the d-wave superconductivity correlation is slightly suppressed by t' and t" in underdoped regions, it is greatly enhanced in the optimal and overdoped regions. The optimal Tc is a result of the balance of these two opposite trends.     

密相液固两相湍流K-ε-T模型及其在管道两相流中的应用

为了准确预测密相液固两相湍流流动,建立了Ｋ－ε－Ｔ模型,推导了控制方程组。利用该模型对竖直上升管中的密相液固两相流动进行了数值模拟,得到了与实验值吻合较好的结果。