Optimization of neural network for ionic conductivity of nanocomposite solid polymer electrolyte system (PEO-LiPF6-EC-CNT)

In this study, the ionic conductivity of a nanocomposite polymer electrolyte system (PEO-LiPF₆-EC-CNT), which has been produced using solution cast technique, is obtained using artificial neural networks approach. Several results have been recorded from experiments in preparation for the training and testing of the network. In the experiments, polyethylene oxide (PEO), lithium hexafluorophosphate (LiPF₆), ethylene carbonate (EC) and carbon nanotubes (CNT) are mixed at various ratios to obtain the highest ionic conductivity. The effects of chemical composition and temperature on the ionic conductivity of the polymer electrolyte system are investigated. Electrical tests reveal that the ionic conductivity of the polymer electrolyte system varies with different chemical compositions and temperatures. In neural networks training, different chemical compositions and temperatures are used as inputs and the ionic conductivities of the resultant polymer electrolytes are used as outputs. The experimental data is used to check the system’s accuracy following the training process. The neural network is found to be successful for the prediction of ionic conductivity of nanocomposite polymer electrolyte system.     

Synthesis and Coordination Behavior of a New Hybrid Bidentate Ligand with Phosphine and Silylene Donors

This work describes the synthesis and coordination behavior of a new mixed-donor ligand PhC(NtBu)₂SiC₆H₄PPh₂ ( 1 ) containing both silylene and phosphine donor sites. Ligand 1 was synthesized from a reaction of ortho-lithiated diphenylphosphinobenzene (LiC₆H₄PPh₂) with chlorosilylene (PhC(NtBu)₂SiCl). Treatment of 1 with Se and GeCl₂ resulted in Si^IV compounds 2 and 3 by selective oxidation of the silylene donor. This strong σ-donor ligand induces dissociation of CuCl and PhBCl₂ leading to formation of ionic complexes 4 and 5 respectively. The reaction of 1 with ZnCl₂ and AlCl₃ resulted in the formation of chelate complexes 5 and 7 , respectively, while treatment with EtAlCl₂ and GaCl₃ forms monodentate complexes 8 and 9 . X-ray analysis of 4 showed that the copper is in the spiro center of the two five-membered rings. Moreover, the copper(I)chloride has not been oxidized but dissociates to Cu⁺ and [CuCl₂]⁻. All the compounds are well characterized by mass spectrometry, elemental analysis, NMR spectroscopy, and single-crystal X-ray diffraction studies.     

SYNTHESIS AND CHARACTERIzATION OF TRIPHENYLANTIMONY (V) (O-ALKYL,O-CYCLOALKYL AND O-ARYLTRITHIOPHOSPHATES)

Triphenylantimony (V) (O-alkyl,O-cycloalkyl and O-aryltrithiophosphates) of the type Ph ₃ Sb[S ₂ (S)P(OR)] (R = Me, Et, Pr ⁿ , Pr ⁱ , Bu ⁿ , Bu ^s , Bu ⁱ , Am ⁱ , Ph and C.h. = cyclohexyl) have been synthesized for the first time by the reaction of triphenylantimony (V) dibromide with potassium trithiophosphates in 1:1 molar ratio in methanol. These new compounds have been characterized by elemental analysis, molecular weight determinations, and spectroscopic (IR,¹³C and ³¹P NMR) studies. On the basis of these data trigonal bipyramidal geometry has been proposed for these compounds.     

A simple microextraction and preconcentration approach based on a mixed matrix membrane

A simple adsorption/desorption procedure using a mixed matrix membrane (MMM) as extraction medium is demonstrated as a new miniaturized sample pretreatment and preconcentration technique. Reversed-phase particles namely polymeric bonded octadecyl (C₁₈) was incorporated through dispersion in a cellulose triacetate (CTA) polymer matrix to form a C₁₈-MMM. Non-steroidal anti-inflammatory drugs (NSAIDs) namely diclofenac, mefenamic acid and ibuprofen present in the environmental water samples were selected as targeted model analytes. The extraction setup is simple by dipping a small piece of C₁₈-MMM (7 mm × 7 mm) in a stirred 10 mL sample solution for analyte adsorption process. The entrapped analyte within the membrane was then desorbed into 100 μL of methanol by ultrasonication prior to high performance liquid chromatography (HPLC) analysis. Each membrane was discarded after single use to avoid any analyte carry-over effect. Several important parameters, such as effect of sample pH, salting-out effect, sample volume, extraction time, desorption solvent and desorption time were comprehensively optimized. The C₁₈-MMM demonstrated high affinity for NSAIDs spiked in tap and river water with relative recoveries ranging from 92 to 100% and good reproducibility with relative standard deviations between 1.1 and 5.5% (n = 9). The overall results obtained were found comparable against conventional solid phase extraction (SPE) using cartridge packed with identical C₁₈ adsorbent.     

Comparison of HPLC and MEEKC for Miconazole Nitrate Determination in Pharmaceutical Formulation

A simple solid phase extraction (SPE) method coupled with high performance liquid chromatography (HPLC) using UV detector and microemulsion electrokinetic chromatography (MEEKC) has been developed and compared for the quantitative determination of miconazole nitrate in pharmaceutical formulation. For HPLC method, two parameters were optimized, namely, the wavelength and the mobile phases. The optimized condition was at the 225 nm wavelength and the mobile phase of ACN:MeOH (90:10 v/v). There are seven MEEKC parameters that were optimized, in this research, which were applied to voltage, temperature, wavelength, sodium dodecyl sulfate (SDS) concentration, buffer pH, buffer concentration and butan-1-ol concentration. The optimum MEEKC condition was obtained using 86.35 % (w/w) 2.5 mM borate buffer pH 9, 0.25 % (w/w) SDS, 0.8 % (w/w) ethyl acetate, 6.6 % w/w butan-1-ol and 6.0 % (w/w) acetonitrile. The combination of SPE using a diol column with HPLC–UV and the MEEKC methods were successfully applied for the determination of miconazole nitrate in a pharmaceutical formulation with the recovery percentage of 98.35 and 92.50 %, respectively.     

Adsorption and Micellization Behavior of Cationic Surfactants (Gemini and Conventional)—Amphiphilic Drug Systems

In the present work, the behavior of mixed drug–surfactant systems has been studied by surface tension measurements. The drug used in this work is adiphenine hydrochloride (ADP) and the surfactants are of m-s-m type geminis, i.e., alkanediyl-α,ω-bis(dimethylalkylammonium bromide), with m = (14, 16), s = (4, 5, 6), and conventional alkyltrimethylammonium bromides (CTAB, TTAB). The excess surface concentration (Γ _max ) increases and the minimum head group area at the air/water interface (A _min) decreases with increasing concentration of surfactant in the drug solution. Both the critical micelle concentration (cmc) and ideal cmc (cmc*) values decrease with mole fraction of surfactants. Also, the cmc values are lower than cmc*, indicating attractive interactions are present in the mixed micelles. The mole fractions of surfactant in the micelles $ \left( {X_{1}^{m} } \right) $ and monolayers $ \left( {X_{1}^{\sigma } } \right) $ , as well as the respective interaction parameters ( $ \beta^{m} $ , $ \beta^{\sigma } $ ), indicate that monolayer formation is easier than micelle formation due to the rigid hydrophobic part of the drug.     

Micelle-Catalyzed Interaction Between [Ni(II)-Gly-Gly]+ and Ninhydrin

The effect of cationic micelles of cetyltrimethyl ammonium bromide (CTAB) on the observed pseudo-first-order rate constant for the interaction of nickel dipeptide complex [Ni(II)-Gly-Gly]⁺ with ninhydrin has been studied spectrophotometrically. At constant temperature and pH, increase in the [CTAB] from 0.0 to 60.0 × 10^?3 mol dm^?3 caused nearly three-fold increase of the rate constant. The micellar catalysis is explained in terms of the pseudophase model. From the observed kinetic data, binding constants of micelle–[Ni(II)-Gly-Gly]⁺ (K _S), and micelle–ninhydrin (K _N) are evaluated, respectively, to be 5.3 mol^?1 dm³ and 84.0 mol^?1 dm³. The role of added inorganic (NaCl, NaBr, Na₂SO₄) and organic salts (NaBenz, NaSal) on the reaction rate has also been examined.     

Ultra Moisturizing Anti-Wrinkle Lotion Enriched with Tocotrienols

A stable palm-based anti-wrinkle lotion enriched with tocotrienols was successfully prepared. The stability of the product was due to the presence of liquid crystalline structure in the emulsion system. It helps in bringing the active to the dermis layer. Functionality active ingredients such as tocotrienols and anti-wrinkle were added in the formulation. A commercial plant extract was used to strengthen the collagen seated at the dermis layer. The product was formulated to pH 5.5 which is suitable for the skin. The mean droplet size is 10.2 µm with a monomodal distribution pattern which prevents agglomeration. This will decrease Brownian motion, thus prolonging its stability. Long-term acute moisturizing tests show a significant increase of between 24% and 17% hydration for five and six weeks respectively. The efficacy testing on 12 subjects confirmed a reduction in natural fine wrinkles on faces during aging or premature aging at ?7.6%.