Miniaturization of GPS patch antennas based on novel dielectric ceramics Zn(1−x)MgxAl2O4 by sol–gel method

The need for miniaturization and weight reduction of GPS patch antennas has prompted the search for new microwave dielectric materials. In this study, a sol–gel method was used to prepare Zn_(1?x)Mg_xAl₂O₄ thin films and fabricate GPS patch antennas at a low annealing temperature (700 °C). X-ray diffraction (XRD) patterns, field emission scanning electron microscopy images, Fourier transform infrared spectra, and optical band gap analyses confirmed the nanostructure of (Mg/Zn)Al₂O₄. The XRD patterns displayed the characteristic peaks of (Mg/Zn)Al₂O₄ with a face-centered cubic structure. Mg addition decreased the crystallite size, surface morphology, and lattice parameters of the resultant films, evidently affecting their density and dielectric constant (? _r ). Based on the material investigated and microwave antenna theory, GPS patch antennas were fabricated using Zn_(1?x)Mg_xAl₂O₄ and then studied using a PNA series network analyzer. The fabricated patch antennas with different ? _r ceramics decreased in size from 12.5 to 10.8 cm². The patch antennas resonated at a frequency of 1.570 GHz and provided a return loss bandwidth between ?16.6 and ?20.0 dB; their bandwidth also improved from 90 to 255 MHz. The GPS patch antenna fabricated from Zn_0.70Mg_0.30Al₂O₄ showed an excellent combination of return loss (?20.0 dB), small size (10.8 cm²), and wide bandwidth (255 MHz). Therefore, addition of Mg improves antenna performance and decreases the dimensions of the device.     

Stability,electronic, and optical properties of two-dimensional phosphoborane

The structure and properties of two-dimensional phosphoborane sheets were computationally investigated using Density Functional Theory calculations. The calculated phonon spectrum and band structure point to dynamic stability and allowed characterization of the predicted two-dimensional material as a direct-gap semiconductor with a band gap of ~1.5 eV. The calculation of the optical properties showed that the two-dimensional material has a relatively small absorptivity coefficient. The parameters of the mechanical properties characterize the two-dimensional phosphoborane as a relatively soft material, similar to the monolayer of MoS₂. Assessment of thermal stability by the method of molecular dynamics indicates sufficient stability of the predicted material, which makes it possible to observe it experimentally.     

Mononuclear High-spin Octahedral Cobalt(II) Complex with Positive Axial Magnetic Anisotropy: Synthesis,Crystal Structure,and DFT Studies

This article outlines the magnetic features of a new six–coordinate high-spin cobalt(II) complex cis-[Co^II(tmphen)₂(NCS)₂] ( 1 ) achieved via the reactions of cobalt(II) thiocyanate with 3,4,7,8-tetramethyl-1,10-phenanthroline. The complex 1 was thoroughly characterized by different analytical and spectroscopic techniques and further confirmed by single X-ray crystal diffraction pattern. Complex 1 is a neutral molecule and adopt highly distorted six-coordinate CoN₆ octahedral coordination sphere surrounded by two thiocyanate N atoms in cis locations and the equatorial plane is occupied by two imine N atoms from the two tmphen ligand while the remaining two imine N atoms reside in the axial positions. Magnetic susceptibility data of complex 1 revealed that the χ_ΜT values decrease significantly to a value of 1.49 cm³ · K · mol^–1 at 2.0 K on decreasing temperatures below 100 K, mainly ascribed to the significant spin–orbit coupling (SOC) of six-coordinate Co^II ions. Furthermore, a field-dependence measurement was performed at 2 K, which shows a positive curvature up to 27 kOe, while it becomes linear up to 2.01 Nμ_B, which authenticated the fact that only the lowest Kramers doublet of ground state is appreciably populated.     

Synthesis of new-type 1,3,6-triazocine via intramolecular reactions of iodocyclization and [3+2] azido cycloaddition

Selective iodocyclization of 6-(alkenylamino)-1-allylpyrazolo[3,4-d]pyrimidines provided hydrogenated derivatives of 1-allyl-8(9)-iodomethylimidazo(pyrimido)[1,2-a]pyrazolo[4,3-e]pyrimidines which were further reacted with NaN₃ at 75°С to 80°С to give a series of new-type 1,3,6-triazocines annulated with the pyrazole, pyrimidine, imidazole (or pyrimidine), and 1,2,3-triazole rings. The compounds synthesized were structurally characterized by analytical, spectral (IR, ¹H and ¹³C NMR, HPLC-mass), and X-ray diffraction data.     

N-methylferrocenyl-N-ethylhydroxy ammonium nitrate: synthesis,characterization, and sensitizer in dye-sensitized solar cells

Transition Metal Chemistry - A new ferrocene-containing hydronitrate salt with formula N-methylferrocenyl-N-ethylhydroxy ammonium nitrate has been synthesized and characterized using microanalyses,...     

Catalytic activity of Mn(III) and Co(III) complexes: evaluation of catechol oxidase enzymatic and photodegradation properties

We have synthesized two mononuclear complexes, Mn-hq and Co-hq, to serve as sustainable catalysts (for degrading dyes from organic pollutant) and as biocatalysts (for promoting oxidation of catechol to quinone). The two complexes have been characterized by various spectroscopic tools, and with the assistance of single-crystal X-ray diffraction data, their molecular structures were established. The present complexes were exploited for the catalytic activity, i.e., enzymatic activity and photocatalytic property. In methanolic solution, Mn-hq and Co-hq were examined for catecholase-like activity and Mn-hq particularly catalyzes the oxidation of 3,5-di-tert-butyl catechol to analogous quinone with a K_cat value of 835.2 h^?1. Additionally, Mn-hq and Co-hq demonstrated remarkable photocatalytic activity for the degradation of methylene blue (MB) in the aqueous medium beneath visible light. Co-hq shows excellent stability and recyclability toward MB. Further, trapping experiment along with degradation pathways is also explored. Thus, the present research throws light on the excellent catalytic properties of simply designed complexes and this activity can be tuned for desired efficiencies in future prospects.

     

Comprehensive Review on Application of FTIR Spectroscopy Coupled with Chemometrics for Authentication Analysis of Fats and Oils in the Food Products

Currently, the authentication analysis of edible fats and oils is an emerging issue not only by producers but also by food industries, regulators, and consumers. The adulteration of high quality and expensive edible fats and oils as well as food products containing fats and oils with lower ones are typically motivated by economic reasons. Some analytical methods have been used for authentication analysis of food products, but some of them are complex in sampling preparation and involving sophisticated instruments. Therefore, simple and reliable methods are proposed and developed for these authentication purposes. This review highlighted the comprehensive reports on the application of infrared spectroscopy combined with chemometrics for authentication of fats and oils. New findings of this review included (1) FTIR spectroscopy combined with chemometrics, which has been used to authenticate fats and oils; (2) due to as fingerprint analytical tools, FTIR spectra have emerged as the most reported analytical techniques applied for authentication analysis of fats and oils; (3) the use of chemometrics as analytical data treatment is a must to extract the information from FTIR spectra to be understandable data. Next, the combination of FTIR spectroscopy with chemometrics must be proposed, developed, and standardized for authentication and assuring the quality of fats and oils.     

Effect of Bulky Functional Groups on Donor and Acceptor Interactions and their Photoluminescence Properties

Material designs that use donor and acceptor units are often found in organic optoelectronic devices. Molecular level insight into the interactions between donors and acceptors are crucial for understanding how such interactions can modify the optical properties of the organic optoelectronic materials. In this paper, tris(4-(tert-butyl)phenyl)amine (pTPA) was synthesized as a donor in order to compare with unmodified triphenylamine (TPA) in a donor–acceptor system by having 2,4,6-triphenyl-1,3,5-triazine (TRZ) as an acceptor. Dimerization of donors and acceptors occurred in solvent when the concentration of solute is high. At 0 K, using a polarizable continuum model, the nitrogen atom of TPA is found to stack on top of the center of triazine of TRZ, whereas such alignment is offset in pTPA and TRZ. We attributed such alignment in TPA-TRZ as the result of attractive interactions between partial localization of 2p_z electrons at the nitrogen atom of TPA and the π deficiency of triazine in TPA-TRZ. By taking into account random motions of the solvent effect at 300 K in quantum molecular dynamics and classical molecular dynamics simulations to interpret the marked difference in emission spectra between TPA-TRZ and pTPA-TRZ, it was revealed that the attractive interaction between pTPA and TRZ in toluene is weaker than TPA and TRZ. Because of the weaker attractive interaction between pTPA and TRZ in toluene, the dimers adopted numerous ground state conformations resulting in broad emission bands superimposed with multiple small Gaussian peaks. This is in contrast to TPA-TRZ which has only one dominant dimer conformation. This study demonstrates that the strength of intermolecular interactions between donors and acceptors should be taken into consideration in designing supramolecular structures.     

LDH-intercalated d-gluconate: Generation of a new food additive-inorganic nanohybrid compound

Intercalation of d-gluconate into the interlamellae of zinc-aluminum-layered double hydroxide for the formation of a food additive-inorganic layered nanohybrid was accomplished by both direct (co-precipitation) and indirect (ion-exchange) methods. Powder X-ray diffraction (PXRD) together with CHNS and Fourier transform infrared (FTIR) analyses showed that the hybridization of d-gluconate with pure phase and good crystallinity was successfully accomplished by a direct method within ranges of pH 7.5-10, Zn to Al initial molar ratio of 2-5 and DG concentration of 0.05-0.3 M. The same nanohybrid compound was also prepared using an indirect ion-exchange method by contacting the pre-prepared LDH with 0.1 M DG for 80 min. The basal spacing of the nanohybrid synthesized by the direct method ranged between 9 and 12.0 Å while that synthesized by the indirect ion-exchange method was 14.0 Å. The crystallinity of the latter was higher than the former and it inherited the crystallinity of the precursor. This work shows that a food additive, such as d-gluconate, can be hybridized into an inorganic host for the formation of a new nanohybrid compound, which can be used to regulate the release of acidity in the food industry.     

Nickel(II) complexes bearing pyrazolylpyridines: synthesis,structures and ethylene oligomerization reactions

Reactions of 2‐bromo‐6‐(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)pyridine ( L1 ) and 2,6‐bis(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)pyridine ( L2 ) with NiCl₂ and NiBr₂ led to the formation of their respective metal complexes [NiCl₂(L1)] ( 1 ), [NiBr₂(L1)] ( 2 ) and [NiBr₂(L2)] ( 3 ) in moderate to high yields. The complexes were characterized using elemental analyses, mass spectrometry and single‐crystal X‐ray diffraction for 2 . The solid‐state structure of 2 confirmed the bidentate coordination mode of L1 and formation of a monometallic compound. Activation of the nickel(II) pre‐catalysts with methylaluminoxane afforded active catalysts in the ethylene oligomerization reaction to produce mainly butenes (84–86%). In contrast, activation of nickel(II) pre‐catalyst 2 with ethylaluminium dichloride resulted in partial Friedel–Crafts alkylation of the toluene solvent by the preformed oligomers. Complex structure, nature of co‐catalyst employed, type of solvent and reaction conditions influenced the catalytic behaviour of these pre‐catalysts. Copyright © 2015 John Wiley & Sons, Ltd.