Polymerization of methyl methacrylate initiated by Mn(III)–glycerol redox system

The kinetics of thermal polymerization of methyl methacrylate initiated by the redox system Mn(III)–glycerol was studied in aqueous sulfuric acid in the temperature range of 30–40°C, and the rates of polymerization, R_p, and Mn³⁺ disappearance, etc., were measured. The effect of certain water-miscible organic solvents and certain cationic and anionic surfactants on the rates of polymerization has been investigated. A mechanism involving the formation of a complex between Mn³⁺ and glycerol whose decomposition yields the initiating free radical with the polymerization being terminated by the metal ion has been suggested.     

Development of a method for recovery of 233U from thorium oxalate cake in reconversion step of reprocessing of irradiated thorium rods

A method is developed for the selective leaching of ²³³U from a thorium oxalate cake. The leaching capacity of ammonium carbonate and nitric acid have been investigated, showing that (NH₄)₂CO₃ leads to higher recovery. The maximum leaching efficiency is obtained using 0.5% ammonium carbonate, with a minimal thorium pick-up. A uranium recovery of 94% is obtained after three consecutive contact experiments in carbonate media, with minimal thorium uptake in the leachate. This process was applied to an actual plant stream, allowing the reduction of the ²³³U -activity from 5.64 to 0.3 Ci/g of thorium oxalate cake.     

Transition metal chemistry of oxime-containing ligands,VI: magnetic and structural properties of mono (pyridine-2-aldoxime) dithiocyanato iron (II) and mono (6-methylpyridine-2-aldoxime) dithiocyanato iron (II) complexes

The complexes of pyridine-2-aldoxime (HPOX) and 6-methylpyridine-2-aldoxime (HMPX) with iron (II) thiocyanate of the type [Fe(L)(NCS)₂] (L=HPOX and HMPX) have been prepared and characterized. A study of X-ray, magnetic, vibrational spectra (conventional and far-infrared), electronic spectra andMössbauer spectra has indicated that these complexes have polymeric, pseudo octahedral, coordination geometry with linear bridging thiocyanate ligands. The electronic spectra of mono complexes show a larger, low symmetry, ligand field than that present in [Fe(L)₂(NCS)₂] complexes. UnperturbedMössbauer spectra show a large quadrupole splitting, E _Q, and smaller isomer shift values in these iron (II) thiocyanate complexes. The magnetically perturbedMössbauer spectra of these iron(II) thiocyanate complexes at room temperature show that the principal component of the electric field gradient tensor is positive and corresponds to ad _xy (⁵B₂) ground state.With 2 Figures     

Biocompatible hydrogels based on chitosan,cellulose/starch,PVA and PEDOT:PSS with high flexibility and high mechanical strength

Fabricating mechanically strong hydrogels that can withstand the conditions in internal tissues is a challenging task. We have designed hydrogels based on multicomponent systems by combining chitosan, starch/cellulose, PVA, and PEDOT:PSS via one-pot synthesis. The starch-based hydrogels were homogeneous, while the cellulose-based hydrogels showed the presence of cellulose micro- and nanofibers. The cellulose-based hydrogels demonstrated a swelling ratio between 121 and 156%, while the starch-based hydrogels showed higher values, from 234 to 280%. Tensile tests indicated that the presence of starch in the hydrogels provided high flexibility (strain at break?>?300%), while combination with cellulose led to the formation of stiffer hydrogels (elastic moduli 3.9–6.6 MPa). The ultimate tensile strength for both types of hydrogels was similar (2.8–3.9 MPa). The adhesion and growth of human osteoblast-like SAOS-2 cells was higher on hydrogels with cellulose than on hydrogels with starch, and was higher on hydrogels with PEDOT:PSS than on hydrogels without this polymer. The metabolic activity of cells cultivated for 3 days in the hydrogel infusions indicated that no acutely toxic compounds were released. This is promising for further possible applications of these hydrogels in tissue engineering or in wound dressings.

Graphical abstract

     

Magnetic switch of permeability for polyelectrolyte microcapsules embedded with Co@Au nanoparticles

We explored using a magnetic field to modulate the permeability of polyelectrolyte microcapsules prepared by layer-by-layer self-assembly. Ferromagnetic gold-coated cobalt (Co@Au) nanoparticles (3 nm diameter) were embedded inside the capsule walls. The final 5 mum diameter microcapsules had wall structures consisting of 4 bilayers of poly(sodium styrene sulfonate)/poly(allylamine hydrochloride) (PSS/PAH), 1 layer of Co@Au, and 5 bilayers of PSS/PAH. External alternating magnetic fields of 100-300 Hz and 1200 Oe were applied to rotate the embedded Co@Au nanoparticles, which subsequently disturbed and distorted the capsule wall and drastically increased its permeability to macromolecules like FITC-labeled dextran. The capsule permeability change was estimated by taking the capsule interior and exterior fluorescent intensity ratio using confocal laser scanning microscopy. Capsules with 1 layer of Co@Au nanoparticles and 10 polyelectrolyte bilayers are optimal for magnetically controlling permeability. A theoretical explanation was proposed for the permeability control mechanisms. "Switching on" of these microcapsules using a magnetic field makes this method a good candidate for controlled drug delivery in biomedical applications.     

The circular chemistry conceptual framework: A way forward to sustainability in industry 4.0

1. Download : Download high-res image (233KB)
2. Download : Download full-size image

     

A note on a characterization of P-matrices

In this note we show that the characterization results for P-matrices due to K.G. Murty and A. Tamir which state that a given square matrixM of ordern is a P-matrix if and only if the linear complementarity problem (q, M) has a unique solution for allq in a specified finite subset of ⁿ depending onM are incorrect whenn > 3.Research supported by Dr. K.S. Krishnan (DAE) fellowship for research in Mathematics and Computer Science, Bombay, India.     

A characterization based on the equidistribution of the first two spacings of record values

Summary For a sequence {X _n:n=0, 1, 2,...} of i.i.d. discrete random variables let X ₀ denote the zeroeth record value and X _L(1), the first record value. It is shown that X ₀ and X _L(1) –X ₀ are identically distributed if and only if X ₀ has the geometric distribution over the lattice k :k=1, 2,... for some >0.     

Preconcentration of trace metals on Amberlite XAD-4 resin coated with dithiocarbamates and determination by inductively coupled plasma-atomic emission spectrometry in saline matrices

Preconcentration of Cd(II), Cu(II), Mn(II), Ni(II), Pb(II) and Zn(II) in saline matrices on Amberlite XAD-4 resins coated with ammonium pyrrolidine dithiocarbamate (APDC) and piperidine dithiocarbamate (pipDTC) and subsequent determination by inductively coupled plasma atomic emission spectrometry were studied. Parameters such as effect of pH, effect of HNO(3) concentration on elution of metals from resin were studied. The results show that Amberlite XAD-4 coated with APDC was more efficient in the recovery of metal ions compared with Amberlite XAD-4 coated with pipDTC, in the concentration range of 0.1-200 mug l(-1), for 1 g of Amberlite XAD-4 coated resin. The detection limits for Cd(II), Cu(II), Mn(II), Ni(II), Pb(II), Zn(II) are 0.1, 0.4, 0.3, 0.4, 0.6, 0.5 mug l(-1), respectively, for resin coated with APDC and 0.7, 1.0, 0.8, 0.9, 1.7 and 1.2 mug l(-1) for resin coated with pipDTC. The effect of diverse ions on the determination of aforesaid metals was studied. The method was applied for the determination of trace metal ions in artificial sea water and natural water samples. The results were compared with extraction AAS method.     

Phosphorus-based p-tert-butylcalix[5]arene ligands

New calix[5]arene trivalent phosphorus derivatives have been synthesized which should be excellent ligands with which to study and control the interaction of a ligand atom with a metal. The larger cavity of the calix[5]arene (compared to calix[4]arene) provides a good balance between constraint and flexibility. Treatment of p-tert-butylcalix[5]arene with 2 equiv of either tris(dimethylamino)phosphine or dichlorophenylphosphine inserts two RP moieties into the calix[5]arene framework to give calix[5](PR)2(OH) (1, R = Me2N; 2, R = Ph). Further treatment of 1 with 4 equiv of HCl gives calix[5](PCl)2(OH) (3). Heating a solution of the monophosphorus compound calix[5](PNMe2)(OH)3 (4) releases dimethylamine to yield both monomeric calix[5](P)(OH)2 (6) and dimeric [calix[5](P)(OH)2](2) (7), the latter having a tubelike geometry. X-ray crystallographic studies confirm the structures and show that 1 and 2 have approximate cone conformations while 3 has an approximate 1,2-alternate conformation. The orientations of the phosphorus lone pairs and oxygen atoms in all derivatives provide a framework for both soft and hard ligand interactions within the calix[5]arene.