A spectrophotometric method for uranium determination

A very sensitive extraction spectrophotometric method for the analysis of uranium based on the extraction of a uranium—benzoate—crystal violet complex by a mixture of xylene and benzene is described. The absorbance maximum is at 606 nm and molar absorptivity is 4.28·10⁴ l·mol⁻¹·cm⁻¹. The interference due to a number of anions and cations studied without any pre-extraction was found to be within permissible limits. The method has been used for determining uranium in a synthetic solution, i.e., uranium in the presence of various other ions. The interference due to some cations was eliminated by the use of a masking agent (boric acid).     

A new chelating resin for preconcentration and determination of Mn(II), Ni(II), Cu(II), Zn(II), Cd(II), and Pb(II) by flame atomic absorption spectrometry

A new polychelatogen, AXAD-16-1,2-diphenylethanolamine, was developed by chemically modifying Amberlite XAD-16 with 1,2-diphenylethanolamine to produce an effective metal-chelating functionality for the preconcentration of Mn(II), Ni(II), Cu(II), Zn(II), Cd(II), and Pb(II) and their determination by flame atomic absorption spectrometry. Various physiochemical parameters that influence the quantitative preconcentration and recovery of metal were optimized by both static and dynamic techniques. The resin showed superior extraction efficiency with high-metal loading capacity values of 0.73, 0.80, 0.77, 0.87, 0.74, and 0.81 mmol/g for Mn(II), Ni(II), Cu(II), Zn(II), Cd(II), and Pb(II), respectively. The system also showed rapid metal-ion extraction and stripping, with complete saturation in the sorbent phase within 15 min for all the metal ions. The optimum condition for effective metal-ion extraction was found to be a neutral pH, which is a great advantage in the preconcentration of trace metal ions from natural water samples without any chemical pretreatment of the sample. The resin also demonstrated exclusive ion selectivity toward targeted metal ions by showing greater resistivity to various complexing species and more common metal ions during analyte concentration, which ultimately led to high preconcentration factors of 700 for Cu(II); 600 for Mn(II), Ni(II), and Zn(II); and 500 for Cd(II) and Pb(II), arising from a larger sample breakthrough volume. The lower limits of metal-ion detection were 7 ng/mL for Mn(II) and Ni(II); 5 ng/mL for Cu(II), Zn(II), and Cd(II), and 10 ng/mL for Pb(II). The developed resin was successful in preconcentrating metal ions from synthetic and real water samples, multivitamin-multimineral tablets, and curry leaves (Murraya koenigii) with relative standard deviations of < or = 3.0% for all analytical measurements, which demonstrated its practical utility.     

Cellulose acetate and polyethersulfone blend ultrafiltration membranes. Part I: Preparation and characterizations

The overall objective of this investigation is to achieve high‐performance membranes with respect to flux and rejection characteristics, with an interplay of blending polymers having desired qualities. Thus, cellulose diacetate and polyethersulfone as candidate materials, in the presence of polyethylene glycol 600 as a pore forming agent, were blended in 100/0, 95/5, 90/10, 85/15, 80,20 and 75/25% compositions using N,N′‐dimethylformamide as solvent and membranes were prepared by the phase inversion technique. Polymer blend composition, additive concentration, and casting and gelation conditions were standardized for the preparation of asymmetric membranes with various pore statistics and morphology. These blend membranes were characterized for compaction in ultrafiltration experiments at 414 kPa pressure in order to attain steady state flux and is reached within 4–5 hr. The pure water flux was measured at 345 kPa pressure and is determined largely by the composition of polyethersulfone and additive concentration. The flux was found to reach the highest values of 66.5 and 275 1/(cm² hr) at 0 and 10 wt% additive concentrations respectively, at 25% SPS content of the blend. Membrane hydraulic resistance derived by measuring water flux at various transmembrane pressure and by using an algorithm was found to be inversely proportional to pure water flux. Water content is estimated by simple drying and weighing procedures and found proportional to pure water flux for all the membranes. The molecular weight cut‐offs (MWCOs) of different membranes were determined with proteins of different molecular weights and found to vary from 20–69 kDa (globular proteins) depending on the PEG and SPS content in the casting dope. Skin surface porosity of the membranes were analyzed by scanning the frozen membrane samples using scanning electron microscopy (SEM) at different magnifications. The surface porosity is in direct correlation to the MWCO derived from solute retention experiments. Copyright © 2004 John Wiley & Sons, Ltd.     

Synthesis of 3,4-di-O-acylated glucose-derived furanoid sugar amino acids (Gaa): conformational analysis of a Leu-enkephalin analog containing di-O-myristoylated Gaa

3,4-Di-O-acylated derivatives 1-3 of a glucose-derived furanoid sugar amino acid (Gaa) were synthesized as novel peptide building blocks to study their effects on peptide conformation. Structural analysis of the di-O-myristoylated Gaa 3-containing Leu-enkephalin analog 4 by various NMR techniques and constrained molecular dynamics (MD) simulation studies established a well-defined β-turn structure in DMSO-d₆ with an intramolecular hydrogen bond between PheNH → TyrCO.     

Use of HPTLC,HPLC, and Densitometry for Qualitative Separation of Indole Alkaloids from Rauvolfia serpentina Roots

JPC – Journal of Planar Chromatography – Modern TLC - High-performance thin-layer chromatography (HPTLC) has been used for normal-phase separation of the components of hexane,...     

Radical polymerization of methyl methacrylate in the presence of stereoregular poly(methyl methacrylate). V. Kinetics of initial template polymerization

The influence of stereoregular poly(methyl methacrylate) (PMMA) as a polymer matrix on the initial rate of radical polymerization of methyl methacrylate (MMA) has been measured between ?11 and +60°C using a dilatometric technique. Under proper conditions an increase in the relative initial rate of template polymerization with respect to a blank polymerization was observed. Viscometric studies showed that the observed effect could be related to the extent of complex formation between the polymer matrix and the growing chain radical. The initial rate was dependent on tacticity and molecular weight of the matrix polymer, solvent type and polymerization temperature. The accelerating effect was most pronounced (a fivefold increase in rate) at the lowest polymerization temperature with the highest molecular weight isotactic PMMA as a matrix in a solvent like dimethylformamide (DMF), which is known to be a good medium for complex formation between isotactic and syndiotactic PMMA. The acceleration of the polymerization below 25°C appeared to be accompanied by a large decrease in the overall energy and entropy of activation. It is suggested that the observed template effects are mainly due to the stereoselection in the propagation step (lower activation entropy Δ S_p^?) and the hindrance of segmental diffusion in the termination step (higher activation energy Δ E_t^?) of complexed growing chain radicals.     

MONITORING LIGHT-INDUCED CHANGES IN ISOLATED, INTACT EYE LENSES

Fluorescence spectral changes occurring upon irradiation with 300 nm light have been monitored in situ in isolated, intact, whole lenses from the eyes of several species. The findings corroborate observations on other individual constituent protein molecules in the solution state, and also reveal features attributable to the supramolecular protein assembly that exists in the whole lens. Irradiation of the lens with 300 nm light causes red shifts in the tryptophan emission spectrum, suggesting alterations in the protein packing in the lens. Intermolecular energy transfer from tryptophan to one of the photoproducts, presumably N-formylkynurenine (N-FK), occurs in the condensed-phase sample. The N-FK formed is photodegraded efficiently in the lens, indicating that the photodynamic effects of endogenous N-FK might not be as severe as has been thought. Species variation in the photoevents are evident, particularly in avian lenses that contain the variant δ-crystallin as the core protein. The photoinduced changes in the near-UV circular dichroism of δ-crystallin (which is α-helical, as opposed to the β-sheet structure of α-, β-, and -γ-crystallins), isolated from chicken lenses, are remarkably different from other crystallins. Irradiation of δ-crystallin leads to a drastic reduction of circular dichroism intensity in the 250–300 nm region, whereas no changes are seen in the peptide absorption band.     

4‐(4‐Fluoro‐3‐phenoxy­phen­yl)‐6‐(4‐fluoro­phen­yl)‐2‐oxo‐1,2‐dihydro­pyridine‐3‐carbonitrile and the 6‐(4‐methyl­phen­yl)‐ analogue

The crystal structures of the title compounds, viz. C₂₄H₁₄F₂N₂O₂, (I), and C₂₅H₁₇FN₂O₂, (II), respectively, have been determined in order to unravel the role of an ordered F atom in generating stable supra­molecular assemblies. On changing the substitution from fluorine to a methyl group, C—H⋯F inter­actions are replaced by C—H⋯π inter­actions, revealing the importance of such weak inter­actions when present alongside N—H⋯O and C—H⋯O hydrogen bonds. The dihedral angle between the planes of the 4‐fluoro­phenyl ring and the pyridine ring is 26.8 (1)° in (I), while that between the planes of the 4‐methyl­phenyl and pyridine rings is 29.5 (1)° in (II).     

Novel Synthesis of Mafenide and Other Amino Sulfonamides by Electrochemical Reduction of Cyano Sulfonamides

Both aliphatic and aromatic amino sulfonamides such as mafenide ( 1a ) were synthesized in good yields (80–86%) by direct electrochemical hydrogenation of the corresponding nitriles in an undivided cell containing a Ni cathode, a Pt anode, and Raney Ni as catalyst (Table 1). The reaction can be performed without external supply of pressurized gas by in situ generation of H₂. Slightly elevated temperatures (45°) and low current densities (10 mA/cm²) are favorable conditions for this type of electrochemical nitrile hydrogenation. Our synthetic protocol does not require high‐pressure equipment or chemical hazards, is environmentally very friendly, and more economical than traditional methods. The concentration of adsorbed H^. radicals on the catalyst surface can be easily controlled by adjusting the electric potential, which may lead to improved product selectivity and, at the same time, reduces the risk of explosion and fire.     

Mixed valency in the high-temperature phases of transition metal molybdates, A MoO4 ( A =Fe, Co, Ni)

Transition metal molybdates of the formulaAMoO₄ whereA=Fe, Co or Ni exhibit a first-order phase transition between 670K–970K. An investigation of the lowtemperature (lt) and high-temperature (ht) phases by x-ray photoelectron spectroscopy, x-ray absorption spectroscopy, magnetic susceptibility and other physical methods shows that the phase transition is associated with a valence change of the typeA ²⁺+Mo⁶⁺αA ³⁺+Mo⁵⁺ in the cases of iron and cobalt molybdates. Contribution No. 311 from the Solid State and Structural Chemistry Unit.