Headspace solvent microextraction of trihalomethane compounds into a single drop

Headspace solvent microextraction (HSME) into a single drop is developed for the determination of six trihalomethanes, CH2Cl2, CHCl3, C4H9Cl, CCl4, C2HCl3, and C2Cl4, in aqueous solution. A drop of benzyl alcohol containing bromoform, as an internal standard, is used for extraction. The analytes are extracted by suspending a 3-microL drop directly from the needle of a microsyringe. The needle passes through the septum of a vessel, and the needle tip appears above the surface of the solution. After the prescribed extraction time, the drop is drawn back into the syringe. The syringe is then removed, and its content is injected directly into a gas chromatography column for analysis. The main parameters affecting the HSME process, such as stirring speed, microdrop volume, sample solution temperature, microsyringe needle temperature, sample volume, solution pH, extracting solvent, and ionic strength of the solution, are studied. Also, the linear range and precision of the method are examined.     

以金属硫酸氢盐为催化剂在无溶剂条件下高效合成3,4-二氢嘧啶-2(1H)-酮

以金属硫酸氢盐M(HSO4)n(Ca(HSO4)2,Zn(HSO4)2和过硫酸氢钾制剂oxone○R)为催化剂催化醛、1,3-二羰基化合物和尿素进行缩合反应,在90℃及无溶剂的条件下高收率、一锅法合成了3,4-二氢嘧啶-2(1H)-酮.     

SnCl4 and SbCl5 promoted aromatization of enamines

Aromatic amines have been synthesized efficiently from enamines using SnCl₄ and SbCl₅ in CH₂Cl₂ at room temperature.     

A simple one-pot procedure for the direct conversion of alcohols into azides using TsIm

A facile and efficient method for one-pot conversion of alcohols into azides using N-(p-toluenesulfonyl)imidazole (TsIm) is described. In this method, alcohols are refluxed with a mixture of NaN₃, TsIm and triethylamine in the presence of catalytic amounts of tetra-n-butylammonium iodide (TBAI) in DMF affording the corresponding alkyl azides in good yields. This methodology is highly efficient for various structurally diverse alcohols with selectivity for ROH: 1° > 2° > 3°.     

Energetic and topological analysis of the reaction of Mo and Mo2 with NH3, C2H2, and C2H4 molecules

The Density functional theory has been applied to characterize the structural features of Mo(1,2)-NH(3),-C(2)H(4), and -C(2)H(2) compounds. Coordination modes, geometrical structures, and binding energies have been calculated for several spin multiplets. It has been shown that in contrast to the conserved spin cases (Mo(1,2)-NH(3)), the interaction between Mo (or Mo(2)) and C(2)H(4) (or C(2)H(2)) are the low-spin (Mo-C(2)H(4) and -C(2)H(2)) and high-spin (Mo(2)-C(2)H(4) and -C(2)H(2)) complexes. In the ground state of Mo(1,2)-C(2)H(4) and -C(2)H(2), the metal-center always reacts with the C-C center. The spontaneous formation of the global minima is found to be possible due to the crossing between the potential energy surfaces (ground and excited states with respect to the metallic center). The bonding characterization has been performed using the topological analysis of the Electron Localization Function. It has been shown that the most stable electronic structure for a pi-acceptor ligand correlates with a maximum charge transfer from the metal center to the C-C bond of the unsaturated hydrocarbons, resulting in the formation of two new basins located on the carbon atoms (away from hydrogen atoms) and the reduction of the number of attractors of the C-C basin. The interaction between Mo(1,2) and C(2)H(4) (or C(2)H(2)) should be considered as a chemical reaction, which causes the multiplicity change. Contrarily, there is no charge transfer between Mo(1,2) and NH(3), and the partners are bound by an electrostatic interaction.     

Studies with inorganic precipitate membranes. III. Consideration of energetics of electrolyte permeation through membranes

The permeability of various electrolytes through parchment-supported ferrocyanide membranes of manganese, cobalt, silver, and cadmium has been measured at 10, 15, 20, 25, and 30°C. The order of permeability at a given temperature was Cl^- > NO₃^- > CNS^- > CH₃COO^- > SO₄^2- for both monovalent and divalent cations. For any given anion, the cations followed the sequence NH₄⁺ > Li⁺ > Ba²⁺ > Ca²⁺ > Mg²⁺ > Al³⁺. This sequence has been correlated with the size of the hydrated ion. Further, the data have been considered from the standpoint of the theory of rate processes and the values for the entropy of activation (ΔS′) have been derived assuming an equilibrium distance of 3 Å in the membrane. The values of ΔS′ were all negative and decreased with increasing valence of the ions. This was interpreted to mean electrolyte permeation with partial immobilization in the membrane.     

Aminoalkylation with Aldehydes Mediated by Solid Lithium Perchlorate

Summary. The solid LiClO₄-mediated one-pot reaction of aldehydes with secondary amines and C nucleophiles afforded the corresponding aminoalkylation products in high yields. Unlike the previous reported procedure, the aminoalkylation of aldehyde was achieved in the presence of only 0.5 equivalents of solid lithium perchlorate in dichloromethane as the solvent with good to high yields at room temperature.     

Simultaneous photoconjugation of methylene blue and cis-Rh(phen)2Cl2+ to DNA via a synergistic effect

Irradiation of the red-light absorbing dye, methylene blue (MB), in the presence of the metal complex, cis-Rh(phen)2Cl2+ (BISPHEN), leads to irreversible photobinding of both reagents to DNA. Evidence from absorption and emission spectroscopy indicates that the dye is strongly complexed to the DNA at the concentrations used in the experiments and that this complex is unaffected by the presence of BISPHEN. The level of covalent binding is proportional to the absorbed light dose, with the quantum efficiency for covalent binding of BISPHEN to the DNA with 633 nm light equal to 3.5 x 10(-4). Electrospray ionization mass spectrum of a mixture of DNA fragments created by enzymatic degradation of DNA isolated following irradiation indicates that purine adducts are formed with both BISPHEN and the dye. In addition, UV-Vis and high-performance liquid chromatography analyses of the irradiated MB/BISPHEN/DNA mixture and isolated adducts show extensive conversion of the dye and metal complex to the corresponding N-demethylated and aquated derivatives, respectively. Triplet quenchers for MB, for example oxygen and benzoquinone, inhibit both the photoconjugation and the photochemistry of BISPHEN. A mechanism for the synergistic interaction is proposed that involves photoconjugation of both partners to the DNA following oxidation and reduction via electron transfer between 1MB*/DNA and 3MB*/BISPHEN.     

Adsorptive Behavior of Methylene Blue onto Sawdust of Sour Lemon,Date Palm,and Eucalyptus as Agricultural Wastes

In the present study, to remove methylene blue (MB) from aqueous solution, some agricultural residues and cheap bioadsorbents such as sawdust of palm trees, eucalyptus, and sour lemon were used. To do this, significant parameters like contact time, temperature, pH, initial concentration, and adsorbent dosage were checked. The results affirmed that the best conditions for MB adsorption from aqueous solution were obtained such as the temperature of 25?°C, pH of 8, adsorbent dosage of 2g/L, contact time of 120?minutes, and dye concentration of 5?mg/l which under these conditions the adsorption efficiencies determined were 95.8, 93.4, and 92.8% using sawdust of palm tree, eucalyptus, and sour lemon, respectively. Also, the equilibrium behavior of adsorbents showed that the Freundlich model could better predict the adsorption behavior of the process due to having a larger correlation coefficient (R²). The maximum biosorption capacities by Langmuir isotherm model were also obtained 54, 53.5, and 52.4?mg/g for sawdust of palm trees, eucalyptus, and lemon, respectively, which were significant amounts. In addition, kinetic behavior of adsorption showed that pseudo-second-order model can describe the kinetics of the adsorption process better than the pseudo-first-order model. Moreover, kinetic, equilibrium, and thermodynamic behaviors of adsorption affirmed that the biosorption process was desirable, physisorption, spontaneous, and exothermic.