Tomographic reconstruction using heuristic Monte Carlo methods

A tomographic reconstruction method based on Monte Carlo random searching guided by the information contained in the projections of radiographed objects is presented. In order to solve the optimization problem, a multiscale algorithm is proposed to reduce computation. The reconstruction is performed in a coarse-to-fine multigrid scale that initializes each resolution level with the reconstruction of the previous coarser level, which substantially improves the performance. The method was applied to a real case reconstructing the internal structure of a small metallic object with internal components, showing excellent results.     

Polyaniline/12-phosphotungstic acid/V<Subscript>2</Subscript>O<Subscript>5</Subscript> nanocomposite and its platinum analog as oxygen reduction electrocatalysts

A guest-host nanocomposite based on electroconducting polyaniline doped with 12-phosphotungstic acid and V₂O₅ as well as its bifunctional analog containing not more than 5 mass% nanosized platinum were obtained. A study was carried out on the structure of these nanocomposites, their redox characteristics, and electrocatalytic activity in the reduction of oxygen. These nanocomposites were found to display catalytic properties in the electrochemical reduction of oxygen, while the presence of even a slight amount of nanosized platinum in the bifunctional composite leads to a significant increase in its electrocatalytic activity. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 5, pp. 307–314, September–October, 2007.     

Exciton Molecules in Quantum Wells: Influence of the Well Width Fluctuations

The influence of the well width fluctuations on the dependence of the binding energy of excitonic complexes in quantum wells is studied by using the path-integral Monte-Carlo technique. The results are compared with available experimental data and a good agreement is found.Postdoctoral researcher of FWO-Vlaanderen     

A new stochastic method of reconstructing porous media

We present a new stochastic method of reconstructing porous medium from limited morphological information obtained from two-dimensional micro- images of real porous medium. The method is similar to simulated annealing method in the capability of reconstructing both isotropic and anisotropic structures of multi-phase but differs from the latter in that voxels for exchange are not selected completely randomly as their neighborhood will also be checked and this new method is much simpler to implement and program. We applied it to reconstruct real sandstone utilizing morphological information contained in porosity, two-point probability function and linear-path function. Good agreement of those references verifies our developed method’s powerful capability. The existing isolated regions of both pore phase and matrix phase do quite minor harm to their good connectivity. The lattice Boltzmann method (LBM) is used to compute the permeability of the reconstructed system and the results show its good isotropy and conductivity. However, due to the disadvantage of this method that the connectivity of the reconstructed system’s pore space will decrease when porosity becomes small, we suggest the porosity of the system to be reconstructed be no less than 0.2 to ensure its connectivity and conductivity.     

Existence of Pulsating Roll-Waves for the Saint Venant System

The phenomenon of roll-waves occurs when shallow water flows down open inclined channels. This flow is described by the Saint Venant’s equations with a friction term due to Chezy. In the case of a flat bottom, their existence (as entropic and periodic travelling waves) follows from a classical work due to DRESSLER [6]. The aim of this paper is to prove the existence of roll-waves when the bottom is modulated by a small periodic perturbation. Following JIN and KATSOULAKIS [15], we first compute a Burgers-type equation which possesses “pulsating” roll-waves (the wave speed oscillates around an average velocity). We prove, in a mathematically rigorous fashion, the existence of these solutions.     

ESR studies on calcite encrustation on Fili neotectonic fault, Greece

Electron spin resonance (ESR) study was done on calcite encrustation on Fili neotectonic fault surface, Greece. Normally such calcite encrustations on fault surfaces are not observed. Significantly, the ESR study has detected the presence of nitrate NO₃²⁻ radical in this calcite encrustation, havingg _⊥=2.0063±0.0001 and hyperfine coupling constantA _⊥=3.44 mT, the second such detection of nitrate NO₃²⁻ radical following a sample from Scott Glacier, Antarctica. From isochronal thermal annealing measurement the NO₃²⁻ radical was found to be quite stable, only fully annealed at 475°C. This study also shows that the ESR, as a tool, can be suitably applied to date the age of formation of the calcite encrustation with SO₃⁻ as an ESR dating signal by additive γ-ray irradiation. A preliminary estimation indicates the age of formation of calcite precipitation at Fili fault, Greece to be about 5600 years.     

Fabrication and characterization of a PbTe quantum dots multilayer structure

Multilayer PbTe quantum dots (QDs) and SiO₂ were grown by pulsed laser deposition (PLD) and Plasma enhanced chemical vapor deposition (PECVD) techniques. The crystalline structure, QD size and size dispersion were observed by high-resolution transmission electron microscopy (HRTEM) measurements. This technique allows one to grow PbTe QDs as small as 1.8 nm diameter and 0.6 nm size dispersion. The whole structure can be used in a Fabry–Perot cavity for an optical device operating at the mid-infrared region.     

Electric Instability in <Emphasis Type="Italic">n</Emphasis>-CdTe:In Layers with <Emphasis Type="Italic">S</Emphasis>-Shaped Voltage-Current Characteristics

A switching of the S-type in the 20–200 μm thick polycrystalline n-CdTe:In layers with resistance of 10³–10⁶ Ω·cm is studied. The electric instability in the layers is found to be due to the electron-thermal breakdown mechanism. The dependence of the switching threshold parameters on the intensity of exposure can be used for fabrication of infrared-radiation controlled electric switches on the basis of n-CdTe:In layers. __________ Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 6, pp. 28–30, June, 2005.