2,8'-disubstituted-1,1'-binaphthyls: a new pattern in chiral ligands

The title binaphthyls 19 and 26, which are the positional isomers of 2-methoxy-2'-(diphenylphosphino)-1,1'-binaphthyl (MOP, 19) and 2-amino-2'-hydroxy-1,1'-binaphthyl (NOBIN, 26), have been synthesized by Suzuki coupling as the key step (10 + 15-->18), followed by functional group transformations, involving C-P and C-N bond formation (18-->19 and 18-->23). Racemic intermediate 22 was resolved by co-crystallization with N-benzylcinchonidinium chloride and the absolute configuration determined by X-ray crystallography. These novel binaphthyls are configurationally stable and, as such, potentially usable as chiral ligands in asymmetric reactions. Michael addition of the glycine-derived enolate 40 to methyl acrylate, carried out in the presence of (R)-(-)-27 as the chiral phase-transfer catalyst, afforded L-glutamic acid (S)-(+)-43 of 92% ee (after hydrolysis of the primary product).     

Accurate electrical and spectroscopic properties ofX 1Σ+ BeO from coupled-cluster methods

Summary This paper reports a series of coupled-cluster (CC) calculations through CCSDT on the theoretically challenging ground state of the BeO molecule. Along with CC methods, quadratic configuration interaction (QCI) approximations to CC theory have been used (QCISD and QCISD(T)), which show several dramatic failings. Equilibrium electrical properties (, _xx , and _zz ) and basic spectroscopic properties (r _e, _e,D _e, and infrared intensity (I)) have been computed. Basis set and electron correlation effects are analyzed in order to arrive at accurate values of the dipole moment and polarizability, which are not known experimentally. For the dipole moment, we obtain a value of 6.25 D, with an uncertainty of about 0.1 D. For _xx and _zz , we suggest respective values of 32 and 36 atomic units (a.u.) and error bars of about 1 and 2 a.u. With extended basis sets, the spectroscopic propertiesr _e, _e, andD _e are reproduced to high accuracy, which is the first time this has been achieved for this species byab initio methods. At the highest calculation levels,I is predicted to be very small. AlthoughI has not been measured, some support for this prediction comes from a recent infrared study of BeO-rare gas complexes. The QCI methods are shown to be much more sensitive to basis set, and even with large basis sets yield values of _zz andI which differ from CC results by an order of magnitude and three orders of magnitude, respectively. These differences doubtless arise from the importance of single excitations (T ₁) for this molecule, as several terms involvingT ₁ are neglected in the QCISD approximation compared with CCSD. We also report CC calculations with Brueckner orbitals, which yield results similar to those obtained with restricted Hartree-Fock orbitals.     

Air/polymer distribution coefficients for polycyclic aromatic hydrocarbons by solid-phase microextraction sampling

Two methods to estimate distribution coefficients (K) between air and poly(dimethylsiloxane) (PDMS) coating of solid-phase microextraction (SPME) fibers for eight low molecular polycyclic aromatic hydrocarbons (PAHs) there are presented. The PDMS phases were used for determination of the coefficients according to equilibrium theory with help of a developed static calibration system (SCS). Another way to estimate the coefficients is based on the use of a linear relationship between the logarithm of the coefficients (log K) and linear temperature-programmed retention indexes (LTPRI) of the compounds without necessity to calibrate. The log K values for both of methods ranged from 5.2 (naphthalene) to 8.9 (pyrene) at 22 degrees C. Relative standard deviation (R.S.D.) of log K for each compound determined by static calibration was no more than 5.3%. R.S.D. of retention times for LTPRI indices did not exceed 0.28% for repeated injection. All experiments were implemented on a GC-MS system.     

Thermal Analysis of the System Na3AlF6–NaVO3

Summary. The phase diagram of the system Na₃AlF₆–NaVO₃ was determined by means of thermal analysis. The system is a simple binary eutectic one. The eutectic point was estimated at x(NaVO₃) = 0.975 and t _eut = 617°C. The XRD patterns of samples after thermal analysis revealed the presence of cryolite and NaVO₃ only supporting the above assumption of a simple eutectic binary system.     

Contactless conductivity detection of synthetic polymers in non-aqueous size-exclusion electrokinetic chromatography

A capacitively coupled contactless conductivity detection (CCD) system has been applied for the detection of neutral synthetic polymers in capillary size-exclusion electrokinetic chromatography (SEEC). Polystyrene standards, that were used as a model compounds, were separated on a capillary column packed with porous 10 microm silica particles with an electrokinetically driven mobile phase, and detected by CCD and UV detection simultaneously. Mass-calibration curves for polystyrene were constructed. Satisfactory results were obtained for the linearity, the run-to-run repeatability (<0.2% for the relative retention and <4% for the peak area) and the robustness of the detector. One of the major issues in this preliminary study was to investigate the origin of the peaks observed for the polystyrene standards. The effect of the molar mass of the polystyrenes on the sensitivity was small. Therefore, the signals obtained could not be explained as the result of an increased viscosity and a decreased solution conductivity of the solute zone. An alternative hypothesis is suggested, and recommendations for further research are given.     

Voltammetric behavior of DNA modified with osmium tetroxide 2,2'-bipyridine at mercury electrodes

Osmium tetroxide complexes with nitrogen ligands (L) are probes of DNA structure and electroactive labels of DNA. Here adducts of single-stranded (ss) DNA with osmium tetroxide 2,2'-bipyridine (DNA-Os,bipy) were studied by cyclic voltammetry for the first time. It was found that at neutral pH DNA-Os,bipy produces three redox couples in the potential range between 0 and -1 V (peaks I-III) and a cathodic peak at about -1.3 V (peak IV). The latter peak decreased with increasing scan rate, and peaks arising from the forward and reverse scans exhibited the same direction, suggesting catalytic nature of the electrode process. We concluded that this peak corresponds to the known differential pulse voltammetric (polarographic) peak of DNA-Os,L adducts for which catalytic hydrogen evolution is responsible. In contrast, currents of cathodic peaks II and III increased almost linearly with increasing scan rate, suggesting involvement of adsorption in the electrode processes. Adsorptive stripping square-wave voltammetry was used to analyze the DNA-Os,bipy at low concentrations. It was shown that at neutral pH, peak III can offer sensitivity in the ppb range, which is only little lower than that reached by catalytic peak IV. The latter peak is, however, superior in sensitivity at acid pH values.     

Capillary electrophoretic study of interactions of metal ions with crown ethers,a sulfated beta-cyclodextrin,and zwitterionic buffers present as additives in the background electrolyte

Stability constants of K, Na, Ca, and Ba with 18-crown-6, K, Na, Li with sulfated beta-cyclodextrin and K, Li, Ca, Mg, Sr, and Ba ions with ([2-hydroxy-1,1-bis(hydroxymethyl) ethyl]-amino)-1-propanesulfonic acid (TAPS) were determined by capillary electrophoresis and computed using a general least squares minimizing program CELET. The results for 18-crown-6 agreed well with those evaluated by graphical methods or reported in the literature. Previously unknown stability constants of sulfated beta-cyclodextrins and TAPS determined for alkali and alkaline earth metals show that sulfated beta-cyclodextrin interacts with monovalent metals allowing to manipulate their effective mobility. It interacts stronger with divalent metal cations. TAPS, as zwitterionic buffer widely used in various analytical, biochemical and other applications, forms complexes with alkali and alkaline earth cations, and although the stability constants are rather low, the equilibria should be taken into account when TAPS is used and metal cations are present in solution at the same time.     

CCSD(T) expectation value calculations of first-order properties

An expectation value approach to calculations of first-order properties using the non-iterative, triple-excitation amplitudes in the coupled cluster wave function is exploited. Three methods are suggested and analysed using the many body perturbation theory (MBPT) expansion arguments. The first method, in which non-iterative triple-excitation amplitudes are used in the expression for the expectation values, makes the wave function accurate through the second order of MBPT. In the second method, which is an extension of the first, effects of triple-excitation amplitudes are coupled with single- and double-excitation amplitudes. The correlated density matrix equivalent through the fourth order to that obtained when CCSDT-la amplitudes are used is employed in the third method. The suggested methods are tested on dipole moment and polarizability calculations for several diatomic closed-shell molecules and are compared to other related approaches. Received: 15 May 1997 / Accepted: 5 June 1997     

Surface patterns of block copolymers in thin layers after vapor treatment

A systematic study of formation of surface patterns in block copolymer thin layers after their exposure to solvent vapors was performed. The studied effect involves layers of thickness approximately equal to the ordering size of polymers - about 45 nm. Experiments were performed on three styrene - methacrylate derivative block copolymers, synthesized by living anionic polymerization: poly(4-octylstyrene)-block-poly(butyl methacrylate), poly(4-fluorostyrene)-block-poly(butyl methacrylate) and poly(p-octylstyrene)-block-poly(methyl methacrylate). The polymers were exposed to vapors of chloroform, 1,4-dioxane, hexane, acetone and tetrahydrofuran.     

The cleavage of heterocyclic compounds in organic synthesis II Use of 5‐nitroisatine for synthesis of various nitrogenous heterocycles

The reactions of 5‐nitroisatine were studied with nucleophiles like heterocyclic amines and alkaline hydroxide. With the use of alkaline hydroxide it was converted into 2‐amino‐5‐nitrophenylglyoxylic acid 2 , with piperidine, morpholine and carbethoxypiperazine to its amides 4a‐4c or by oxidation to 5‐nitroanthranilic acid 7. This acid was used for synthesis of 3‐hydroxy‐6‐nitro‐2‐phenyl‐1H‐quinolin‐4‐one 10. Semicarbazone of 5‐nitroisatine 11 was converted to 5‐(2‐amino‐5‐nitrophenyl)‐2,3,4,5‐tetrahydro‐1,2,4‐triazine‐3,5‐dione 12. Cyclocondensation of this compound to afford 8‐nitro‐2,3‐dihydro‐5H‐[1,2,4]triazino‐[5,6‐b]indol‐3‐one 13 was unsuccessful.