Kalorimetrische untersuchung von binären legierungen des platins und palladiums mit gallium,indium und thallium

Employing tin and lead solution calorimetry, the formation enthalpies of those phases having platinum and palladium as major component have been determined in the PdGa, PdIn, PdTl, PtGa und PtIn systems. These enthalpies are highly exothermic and suggest strong atomic interaction betweens palladium and platinum on the one hand and the third subgroup elements on the other. The experimental values have been compared with those obtained from the Miedema model. The thermodynamic data are discussed and related to the crystal structures found with these alloys.     

Syntheses and PE-Spectroscopic Investigations of 2,6- and 3,5-Bridged 1,4-Dimethylidenecyclohexanes

Three 1,4-dimethylidenecyclohexanes, bridged in the 2,6- and 3,5-positions by two ethano ( 4 ), one ethano and one propano ( 5 ), and two propano bridges ( 6 ) have been synthesized. The interaction of the two exocyclic methylidene groups has been investigated by He(I) photoelectron (PE) spectroscopy. It revealed a slightly larger energy difference (0.8 eV) for 4 and 5 as compared to the parent 1,4-dimethylidenecyclohexane ( 7 ) (0.7 eV). The interpretation of the PE spectra was based on the comparison with PE data of related systems and with the results of semiempirical calculations on 4–6 .     

Trace determination of arsenic species by capillary electrophoresis with direct UV detection using sensitivity enhancement by counter- or co-electroosmotic flow stacking and a high-sensitivity cell

Stacking techniques used independently and also with a high-sensitivity cell (HSC) were employed to optimise sensitivity and detection limits in the direct photometric detection of the following eight arsenic species by capillary zone electrophoresis (CZE): arsenite, arsenate, monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), 4-hydroxy-3-nitrophenylarsonic acid (Roxarsone), p-aminophenylarsonic acid (p-ASA), 4-nitrophenylarsonic acid (4-NPAA), and phenylarsonic acid (PAA) (target analytes). The stacking mechanisms, optimised stacking and separation conditions, and concentration sensitivity enhancement factors were discussed and compared for (i) normal stacking mode (NSM, sometimes also referred to as field-amplified stacking) in an uncoated fused-silica capillary in the counter-electroosmotic flow (EOF) mode, (ii) large-volume sample stacking (LVSS) with polarity switching, and (iii) the less often applied stacking method of co-EOF NSM stacking with EOF reversal using a poly(diallydimethylammonium chloride) (PDDAC)-coated capillary. The optimal injection volumes were 7.4, 60 and 17.2% of the total capillary volume, for the above three methods, respectively. LVSS with polarity switching gave the lowest limit of detection (LOD). The use of the HSC further reduced the LOD of each target analytes by a factor of 5-8 times. By combining LVSS and HSC, LODs of the target analytes could be reduced by a factor of 218-311, to 5.61, 9.15, 11.1, and 17.1 microg/L for As(III), DMA, MMA, and As(V), respectively. The method was demonstrated to be applicable to the determination of the target analytes in tap water and lake water, with recoveries in the range of 89.4-103.3%.     

2‐(4‐Hydroxy­phenyl)‐4,4‐dimethyl‐2‐oxazoline: X‐ray and density functional theory study

In the crystal structure of the title compound, C₁₁H₁₃NO₂, there are strong inter­molecular O—H⋯N hydrogen bonds which, together with weak intra­molecular C—H⋯O hydrogen bonds, lead to the formation of infinite chains of mol­ecules, held together by weak inter­molecular C—H⋯O hydrogen bonds. A theoretical investigation of the hydrogen bonding, based on density functional theory (DFT) employing periodic boundary conditions, is in agreement with the experimental data. The cluster approach shows that the influence of the crystal field and of hydrogen‐bond formation are responsible for the deformation of the 2‐oxazoline ring, which is not planar and adopts a ⁴T₃ (^C3T_C2) conformation.     

Biocompatible hydrogels based on chitosan,cellulose/starch,PVA and PEDOT:PSS with high flexibility and high mechanical strength

Fabricating mechanically strong hydrogels that can withstand the conditions in internal tissues is a challenging task. We have designed hydrogels based on multicomponent systems by combining chitosan, starch/cellulose, PVA, and PEDOT:PSS via one-pot synthesis. The starch-based hydrogels were homogeneous, while the cellulose-based hydrogels showed the presence of cellulose micro- and nanofibers. The cellulose-based hydrogels demonstrated a swelling ratio between 121 and 156%, while the starch-based hydrogels showed higher values, from 234 to 280%. Tensile tests indicated that the presence of starch in the hydrogels provided high flexibility (strain at break?>?300%), while combination with cellulose led to the formation of stiffer hydrogels (elastic moduli 3.9–6.6 MPa). The ultimate tensile strength for both types of hydrogels was similar (2.8–3.9 MPa). The adhesion and growth of human osteoblast-like SAOS-2 cells was higher on hydrogels with cellulose than on hydrogels with starch, and was higher on hydrogels with PEDOT:PSS than on hydrogels without this polymer. The metabolic activity of cells cultivated for 3 days in the hydrogel infusions indicated that no acutely toxic compounds were released. This is promising for further possible applications of these hydrogels in tissue engineering or in wound dressings.

Graphical abstract

     

Photometrische Wismutbestimmung mit Brenzcatechinviolett

Zusammenfassung Es wurden die Bedingungen der photometrischen Wismutbestimmung mit Brenzcatechinviolett bei der WellenlÄnge _max=580 nm ausgearbeitet und der Einflu\ der Fremdionen untersucht. Das Lambert-Beersche Gesetz gilt in den Konzentrationsgrenzen 0,0–6,2 g Bi/ml bei 1,6 cm Schichtdicke.

---

Summary A method is given for the photometric determination of bismuth using pyrocatechol violet, at the wave-length of _max=580 nm. Interferences by foreign ions have been examined. Beer's law is obeyed from 0.0 to 6.2 g Bi/ml (1,6 cm cuvettes).

---

---

Als erste Mitteilung dieser Reihe soll die Arbeit: Malát, M.: Naturwissenschaften 48, 569 (1961) betrachtet werden.     

Modelling,optimisation and control of selectivity in the separation of aromatic bases by electrokinetic chromatography using a neutral cyclodextrin as a pseudostationary phase

A simple mathematical model describing the separation of a series of aromatic bases by electrokinetic chromatography using beta-cyclodextrin (beta-CD) as a pseudostationary phase is described. The model takes into account changes in electrolyte pH and the different formation constants between the neutral and charged forms of the analytes with the CD. Constants in the model were obtained within the two-dimensional experimental space defined by pH and [beta-CD] with nonlinear regression using only five experimental points. These constants agreed with expected trends in analyte-CD interactions and predicted much higher formation constants for the neutral analyte-CD complex than for the charged analyte-CD complex. Correlation between predicted and observed mobilities using additional 20 points within the experimental space gave r(2) = 0.995. Optimisation of the pH and [beta-CD] was performed using both the normalised resolution product and minimum resolution product criteria and provided two optimum separations which exhibited different selectivities. Differences between predicted and observed migration times at these optima were less than 2.5 and 5% for the normalised resolution product and the minimum resolution criteria, respectively. In both cases the correct migration order was predicted. The model was also applied successfully to the optimisation of conditions for the separation of a specific mixture of analytes or for conditions under which particular analytes migrated in a desired order.     

On-line coupling of capillary isotachophoresis and zone electrophoresis for the assay of phenolic compounds in plant extracts

The combination of capillary isotachophoresis (ITP) and capillary zone electrophoresis (CZE) in the column coupling configuration was optimized in a mode where the electrolyte for the CZE step is different from the leading and terminating ITP electrolytes. Two colored markers, picric acid and 1-nitroso-2-naphthol, were used for exact timing of the transfer of isotachophoretically stacked analyte zones into the CZE column and for the control of the residual amount of the leading and terminating ITP electrolytes entering the CZE capillary together with the analytes, thus controlling the duration of transient ITP migration in the CZE capillary and ensuring good separation of the analytes and reproducibility of the migration times (relative standard deviations 1%). ITP-CZE was applied to the simultaneous assay of several cinnamic acid derivatives and flavonoids in methanolic extracts of Sambucus flowers and Crataegus leaves and flowers. The preconcentrating and cleansing effect of the ITP step allowed injection of relatively large sample volumes (30 microL). The limits of detection were approximately 20-50 ng x mL(-1) and 100 ng x mL(-1) for the acids and flavonoids, respectively ( thick similar 200-times lower compared to conventional CE) with spectrophotometric detection at 254 nm. The ITP-CZE exhibited satisfactory linearity and precision when using CZE buffer of pseudo "pH" 9.0; 1-nitroso-2-naphthol was employed as the internal standard. The separation took approximately 35 min. The ITP-CZE results for rutin, hyperoside, and vitexin-2-O"-rhamnoside were in good accordance with those obtained previously by high-performance liquid chromatography.     

On the Hahn-Banach Extension Property in Hardy and mixed norm spaces on the unit ball

For a nonempty setE of nonnegative integers letH _E ^{p, q, a} andH _E ^p be the closed linear span of