HPLC and GC Methods for Determination of Lubricants and Their Evaluation in Analysis of Real Samples of Polyethylene

High performance liquid chromatography (HPLC) and gas chromatography (GC) are introduced for analysis of polymer lubricants (stearamide, oleamide and erucamide). In the HPLC method, a reverse phase octadecylsilane (ODS) column along with acetonitrile/methanol (60:40) as a mobile phase were used. Detection of analytes was performed by a UV detector at 202 nm. The analysis time was less than 8 min. In the GC method, polar capillary column and flame ionization detector (FID) were used for separations and detection, respectively. The analysis time by GC was longer than HPLC and was about 30 min. Limits of detection, linear range and repeatability of both methods are similar, but determination of oleamide in real samples by HPLC method is difficult due to complexity of the initial part of HPLC chromatogram in polyethylene samples. That problem is not observed in the GC method. Detection limits in both methods for all analytes are lower than 0.003% which are much lower than the amount of lubricants in commercial polymers (0.05–0.2%).     

Vieta–Fibonacci wavelets: Application in solving fractional pantograph equations

In this paper, the Vieta–Fibonacci wavelets as a new family of orthonormal wavelets are generated. An operational matrix concerning fractional integration of these wavelets is extracted. A numerical scheme is established based on these wavelets and their fractional integral matrix together with the collocation technique to solve fractional pantograph equations. The presented method reduces solving the problem under study into solving a system of algebraic equations. Several examples are provided to show the accuracy of the method.     

A theoretical prediction for exclusive decaysB→K(K*)η c

The decay rates for the exclusiveB decaysBK _c andBK* _c are calculated in the context of the heavy quark effective theory. We obtain(BK _c )/ (BK)=1.6±0.2 and(BK* _c )/ (K*)=0.39±0.04. These results lead to estimates BR(BK _c )=(0.11±0.02)% and BR(BK* _c )=(0.05±0.01)% if we use the central current experimental values forB(K, K ^*) branching ratios.     

NMR study of the stoichiometry,stability and exchange kinetics of complexation reaction between Pb2+ ion and 18-crown-6 in binary acetonitrile-water mixtures

Proton NMR was used to study the complexation reaction between lead ion and 18-crown-6 in a number of binary acetonitrile-water mixtures. Formation constant for the resulting 11 complexes in different solvent mixtures was determined by computer fitting of the chemical shift-mole ratio data. There is an inverse relationship between the complex stability and amount of water in the mixed solvent. The dissociative kinetics of the complex was studied by proton line-shape analysis. The Arrhenius plots showed a distinct isokinetic temperature at about 25°C at which the decomplexation rate is more or less independent of the solvent composition. the complexation rate and the activation parameters E _a , H and S, for the exchange have been determined and found to be strongly solvent dependent. There is actually a linear relationship between the mole fraction of acetonitrile in the mixed solvent and logarithm of the stability constant as well as activation parameters.     

Highly Efficient and Practical Syntheses of Lavendamycin Methyl Ester and Related Novel Quinolindiones

The novel 7-(N-formyl-, 7-(N-acetyl-, and 7-(N-isobutyrylamino)-2-methylquinoline-5,8-diones were synthesized in excellent overall yields in three steps via the nitration of the commercially available 8-hydroxy-2-methylquinoline followed by a reduction-acylation step and then oxidation. Acid hydrolysis of 7-(N-acetylamino)-2-methylquinoline-5,8-dione (14a) afforded the novel 7-aminoquinoline-5,8-dione 7 in excellent yields. Due to our efficient preparation of dione 14a, we now report a short and practical method for the total synthesis of the potent antitumor agent lavendamycin methyl ester (1b) with an excellent overall yield.     

Wet carbon-based solid acid/NaNO_3 as a mild and efficient reagent for nitration of aromatic compound under solvent free conditions

Nitro aromatic compound can be obtained in high yields via nitration of aromatic compound with wet carbon-based solid acid and NaNO_3 under solvent free oxidation at room temperature.     

Flow-through optical fiber sensor for automatic sulfide determination in waters by multisyringe flow injection analysis using solid-phase reflectometry

A software-controlled flow-through optical fiber diffuse reflectance sensor capitalized on the implementation of disk-based solid-phase pre-concentration schemes in a multisyringe flow injection analysis (MSFIA) set-up is proposed for the trace determination of sulfide in environmental waters and wastewaters. The fully automated flowing methodology is based on Fischer's coupling reaction of sulfide with N,N-dimethyl-p-phenylenediamine (DMPD) in the presence of Fe(iii) as oxidizing reagent in a 0.5 M HCl medium. The on-line generated methylene blue dye is subsequently delivered downstream to a dedicated optode cell furnished with an octadecyl-chemically modified (C(18)) disk, while continuously recording the diffuse reflectance spectrum of the pre-concentrated compound. A double regeneration protocol is finally executed to warrant minimum background noise and negligible baseline. Under the optimized chemical and hydrodynamic conditions, the optosensing MSFIA method features coefficients of variation better than 0.7%(n= 10) at 50 microg l(-1) concentration, a linear working range of 20-200 microg l(-1) sulfide, a 3sigma(blank) detection limit of 2.9 microg l(-1) sulfide and an injection throughput of 8 h(-1) for a pre-concentration sample volume of 2.9 ml. The interfacing of the robust and versatile multisyringe flow injection-based optode with a plug-in spectrophotometer furnished with a light emitting diode assures the miniaturization of the overall flow analyzer, which is, thus, readily adaptable to real-time monitoring schemes. The potential of the multisyringe flow method was assessed via the determination of sulfide traces in water samples of different complexity (namely, freshwater, seawater and wastewater).     

Syntheses,structure, and photoluminescence properties of the 1-dimensional chain compounds [(TPA)(2)Au][Au(CN)(2)] and (TPA)AuCl (TPA = 1,3,5-triaza-7-phosphaadamantane)

The structures and temperature-dependent photoluminescence properties of the one-dimensional compounds [(TPA)(2)Au][Au(CN)(2)], 1, and (TPA)AuCl, 2, are reported. An extended linear chain with weak Au.Au interactions along the c-axis is evident in the structure of 1, and a helical chain with a pitch of 3.271 A is seen for 2. The intrachain Au...Au separation is 3.457(1) and 3.396(2) A in 1 and 2, respectively. As a result of this weak Au...Au interaction, the physical properties of these compounds are anisotropic. Scanning electron microscopy (SEM) studies indicate that single crystals of both compounds are noninsulating. Single crystals of 1 do not luminesce visibly, but grinding the crystals finely initiates a strong green emission under UV irradiation at room temperature. Further interesting optical properties include the dependence of the emission profile of the powder on the exciting wavelength and luminescence thermochromism. When excited at wavelengths < 360 nm, the powder exhibits a blue emission at 425 nm while excitation with longer wavelengths leads to a green emission near 500 nm. While the green emission dominates at ambient temperature, cooling to cryogenic temperatures leads to the dominance of the blue emission. Fibers of 2 are luminescent at 78 K with an emission band centered at 580 nm. Compound 1 crystallizes in the orthorhombic space group Cccm (No. 66), with Z = 2, a = 6.011(1) A, b = 23.877(6) A, c = 6.914(1) A, V = 992.3(3) A(3), and R = 0.0337. Compound 2 crystallizes in the trigonal space group R3 (No. 148), with Z = 18, a = 22.587(2) A, b = 22.587(2) A, c = 9.814(2) A, V = 4336 A(3), and R = 0.0283.     

A convenient synthesis of chiral succinic acid-d2 by catalytic asymmetric reduction using a ruthenium BINAP catalyst

The synthesis of (2R,3R) and (2S,3S) dideuteriosuccinic acid in 63 ± 10% enantiomeric excess by reduction of the half acid ester of ethyl fumarate from (R) and (S) BINAP ruthenium (II) diacetate complex, respectively, is reported. (2R,3R) and (2S,3S)-Dideuteriosuccinic acid has also been prepared from (R)-BINAP ruthenium (II) dicarboxylate complex directly in similar optical purity by reversing the sequence of introduction of the isotopic label.