Phase separation in the formation of hollow particles by suspension polymerization for divinylbenzene/toluene droplets dissolving polystyrene

Phase-separation behavior within polymerizing divinylbenzene/toluene droplet dissolving polystyrenes (PS) was investigated to clarify the formation mechanism of the hollow polymer particles by suspension polymerization. No hollow particles were obtained at a low content of low-molecular-weight PS where phase separation occurred at high conversion. On the other hand, hollow particles were obtained at a high content of high-molecular-weight PS where phase separation occurred at low conversion. The phase separation in an early stage of the polymerization, which was promoted by the presence of PS and cross-links of polydivinylbenzene, was a key factor for the formation of the hollow structure.     

Condensed thienopyrimidines. II. Synthesis and gastric antisecretory activity of thiazole and polymethylene condensed thienopyrimidine derivatives

Thiazolo[3,2-a]thieno[3,2-d]-, [3,4-d]- and [2,3-d]pyrimidin-5-one derivatives (6, 11 and 16), and polymethylene condensed thieno[3,2-d]-, [3,4-d]- and [2,3-d]pyrimidin-5-one derivatives (19-21), in which the oxygen atom of the oxazolidine moiety in 3 was replaced by a sulfur atom or methylene groups, were synthesized and evaluated for gastric antisecretory activity in pylorus-ligated rats. The structure-activity relationships of these compounds are discussed.     

A study of embolizing materials for chemo-embolization therapy of hepatocellular carcinoma: embolic effect of cisplatin albumin microspheres using chitin and chitosan in dogs, and changes of cisplatin content in blood and tissue.

Hepatic artery of dogs was embolized with cisplatin (CDDP) albumin microspheres containing chitin and chitosan to investigate the in vivo CDDP release kinetics from CDDP albumin microspheres, the CDDP cumulative characteristics in the liver, and the influence of microsphere administration on hepatic tissue. Results showed that changes in blood CDDP content were dependent on CDDP albumin microsphere type and that release kinetics were better sustained when chitin was added to the microspheres or when the microspheres were treated with chitosan. In particular, the administration of CDDP in the chitin-containing CDDP chitosan albumin microspheres showed a blood CDDP content of approximately 0.26 micrograms Pt/ml 14 d after administration. The administration of chitin-containing or chitosan treated CDDP microspheres showed a CDDP content in the hepatic tissue of 0.14 to 0.23 micrograms Pt/g 28 d after administration. They also showed better control of CDDP release than those without chitin or chitosan treatment. No CDDP influence on hepatic tissue was observed. We conclude that, even in vivo, chitin and chitosan are effective embolic materials.     

Applicability of headspace solid-phase microextraction to the determination of multi-class pesticides in waters

The applicability of headspace solid-phase microextraction (HS-SPME) to pesticide determination in water samples was demonstrated by evaluating the effects of temperature on the extraction of the pesticides. The evaluations were performed using an automated system with a heating module. The 174 pesticides that are detectable with gas chromatograph were selected objectively and impartially based on their physical properties: vapor pressure and partition coefficient between octanol and water. Of the 174 pesticides, 158 (90% of tested) were extracted with a polyacrylate-coated fiber between 30 and 100 degrees C and were determined with gas chromatograph-mass spectrometry. The extraction-temperature profiles of the 158 extracted pesticides were obtained to evaluate the effects of temperature on the extraction of pesticides. The pesticides were classified into four groups according to the shape of their extraction-temperature profiles. The line of demarcation between extractable pesticides and non-extractable pesticides could be drawn in the physical property diagram (a double logarithmic plot of their vapor pressure and partition coefficient between octanol and water). The plot also revealed relationships between classified extraction features and their physical properties. The new method for multi residue screening in which the analytes were categorized into sub-groups based on extraction temperature was developed. In order to evaluate the quantitivity of the developed method, the 45 pesticides were chosen among the pesticides that are typically monitored in waters. Linear response data for 40 of the 45 was obtained in the concentration range below 5 microg/l with correlation coefficients ranging between 0.979 and 0.999. The other five pesticides had poor responses. Relative standard deviations at the concentration of the lowest standard solution for each calibration curve of the pesticides ranged from 3.6 to 18%. The value of 0.01 microg/l in the limits of detection for 17 pesticides was achieved only under the approximate conditions for screening, not under the individually optimized conditions for each pesticide. Recoveries of tested pesticides in actual matrices were essentially in agreement with those obtained by solid-phase extraction.     

Electrochemical Properties of Vanadium Oxide Aerogels and Aerogel Nanocomposites

The electrochemical properties of high surface area transition metal oxide aerogels are extremely interesting because aerogels serve to amplify surface effects. As a result, the electrochemical properties are dominated by surfaces rather than by bulk behavior. In the case of vanadium oxide aerogels this leads to extraordinary electrochemical properties, including an extremely high capacity for lithium and electrochemical responses that are both battery-like and capacitor-like. By exploiting sol-gel synthesis, it is possible to synthesize nanocomposite electrodes in which aerogels are in intimate contact with carbon nanotubes. The resulting nanocomposites exhibit superior electrochemical properties, especially at high discharge.     

Pd(0)‐catalyzed polyaddition of bifunctional vinyloxiranes with 1,3‐dicarbonyl compounds: The synthesis of polymers containing hydroxy and carbonyl groups

The palladium(0)‐catalyzed polyaddition of bifunctional vinyloxiranes [1,4‐bis(2‐vinylepoxyethyl)benzene ( 1a ) and 1,4‐bis(1‐methyl‐2‐vinylepoxyethyl)benzene ( 1b )] with 1,3‐dicarbonyl compounds [methyl acetoacetate ( 4 ), dimethyl malonate ( 6 ), and Meldrum's acid ( 8 )] was investigated under various conditions. The polyaddition of 1 with 4 was carried out in tetrahydrofuran with phosphine ligands such as PPh₃ and 1,2‐bis(diphenylphosphino)ethane (dppe). Polymers having hydroxy, ketone, and ester groups in the side groups ( 5 ) were obtained in good yields despite the kinds of ligands employed. The number‐average molecular weight value of 5b was higher than that of 5a . The polyaddition of 1b and 6 was affected by the kinds of ligands employed. The corresponding polymer 7b was not obtained when PPh₃ and 1,2‐bis(diphenylphosphino)ferrocene were used. The polyaddition was carried out with dppe as the ligand and gave polymer 7b in a good yield. The molecular weight of the polymer obtained from 1b and 8 was much higher than those of polymers 5b and 7b . The polyaddition with Pd₂(dba)₃ · CHCl₃/dppe as a catalyst (where dba is dibenzylideneacetone) produced polymer 9b in a 92% yield (number‐average molecular weight = 45,600). The stereochemistries of all the obtained polymers were confirmed as an E configuration by the coupling constant of the vinyl proton. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2487–2494, 2002     

Preparation of Titania Nanosheet-Precipitated Coatings on Glass Substrates by Treating SiO2-TiO2 Gel Films with Hot Water Under Vibrations

Titania nanosheet-precipitated coatings have been prepared by treating SiO₂-TiO₂ gel films on glass substrates with hot water at 90°C under vibration. Longitudinal vibrations at about 6 Hz during the treatment enhanced the formation of titania nanosheet. The titania nanosheet consisted of several layers with a spacing of about 0.6 nm and was identified as hydrated titania with a lepidocrocite-type structure. The morphology of the titania nanosheet-precipitated coatings is probably achieved by lowering of the concentration of hydrolyzed titania species at the surface due to rapid water flow driven by the vibrations. The coatings were transparent in the visible range and showed high photocatalytic activity and antifogging property.     

Palladium-catalyzed oxidation of alcohols via their allyl carbonates under neutral conditions

Treatment of alkyl allyl carbonates derived from various alcohols with a palladium catalyst in MeCN affords ketones and aldehydes in high yields. This new method of oxidation of alcohols can be applied to various alcohols except simple primary alcohols.     

Secondary hypervalent I(III)...O interactions: synthesis and structure of hypervalent complexes of diphenyl-lambda3-iodanes with 18-crown-6

Reported here for the first time are the synthesis and characterization of supramolecular complexes between diaryl-lambda(3)-iodanes and 18-crown-6 (18C6). Slow evaporation of solvents afforded 1:1 and 2:1 complexes between Ph(2)IBF(4) and 18C6 as stable crystals, depending on the conditions. X-ray crystal structures of these complexes indicated that each iodine atom contacts with the three adjacent oxygen atoms of 18C6 through two hypervalent secondary bonding and a weak interaction. (1)H NMR analyses and CSI-MS spectra showed that, in dichloromethane solution, Ph(2)IBF(4) exclusively forms the 1:1 complex with 18C6 (binding constant K(a), 1.02 x 10(3) M(-)(1)). The binding constants decrease with the increased solvent donor ability (Gutmann's DN). Changing the heteroatom ligand from BF(4) to the less nucleophilic PF(6) and AsF(6) increased the binding constant by about six times. Substitution of an electron-withdrawing group onto the para position of Ph(2)IBF(4) tends to increase in the complex stability. A linear Hammett relationship (rho = 0.59) between log K(a) and sigma(p)(+) values of substituents indicates that the diaryl-lambda(3)-iodanes with electropositive iodine(III) interact more efficiently with 18C6. Decreased binding magnitude was measured with 15C5, dibenzo-18C6, dibenzo-21C7, and dibenzo-30C10.     

Phase separation of poly(γ-benzyl L-glutamate) to liquid crystal and isotropic solution in various helicogenic solvents

Solvent effects on the phase separation of poly(-benzyl L-glutamate) to liquid crystal and isotropic solution have been observed in various helicogenic solvents. The temperature-composition phase diagrams have been determined for each solution. The critical concentrations, ₂ ^* , at which the phase separation occours have been compared in various solvents. In dimethylformamide in which the polymer is molecularly dispersed, the observed ₂ ^* value has agreed with that calculated by Flory's theory. In some solvents in which the polymer aggregates in a head-to-tail mode such as chloroform, the observed ₂ ^* values have been considerably small. It is assumed that the polymer aggregates behave as longer particles than the original particles. In dioxane in which the polymer aggregates highly both in a head-to-tail and a side-by-side modes, the ₂ ^* value has been a little larger than that in chloroform. In this case the relationship between the aggregation and the liquid crystal formation is so complicated that further investigation is necessary. In aromatic solvents such asm-cresol that dissolves the polymer almost molecularly, the ₂ ^* is smaller than that in dimethylformamide. Therefore, the intermolecular interactions between the phenyl groups in the side groups of the polymer and those in solvent molecules must be considered.The author is grateful to Mr. K. Sano and Mr. M. Watanabe for their observation of the liquid crystal formation.