Improved models for the phase behaviour of hydrogen fluoride: chain and ring aggregates in the SAFT approach and the AEOS model

Hydrogen fluoride presents one of the strongest hydrogen bonds known. Ring aggregates exist both in the vapour and liquid phases at low temperatures resulting in an anomalously high low-temperature vapour pressure. The effect of ring-like aggregates on the vapour—liquid phase equilibria of associating fluids is studied within the framework of the statistical associating fluid theory (SAFT) and in the chemical model of Lencka and Anderko (AEOS). The SAFT approach incorporates separate contributions to describe chain formation, association (hydrogen bonding), and long range dispersion forces. The treatment of the association interactions stems from the thermodynamic perturbation theory of Wertheim. At the first level of approximation the contribution of ring-like aggregates is neglected and only chain- and treelike structures are treated. In this work an earlier extension of the approach to incorporate ring aggregates is used to model the phase behaviour of hydrogen fluoride. The chemical model of Lencka and Anderko for associating fluids is also considered together with a modification that takes into account the formation of ring aggregates. Vapour pressures and coexistence densities are examined together with heats of vapourization, and the calculations are compared with experimental data.     

Electron spin resonance studies of 199HgH, 201HgH, 199HgD and 201HgD isolated in neon and argon matrices at 4K: an electronic structure investigation

Various isotopomers of the mercury hydride radical (HgH) have been generated in a microwave discharge and trapped in neon and argon matrices at 4 K for electron spin resonance (ESR) investigations. Both the dipolar (A_dip) and isotropic (A_iso) components of the nuclear hyperfine interactions have been directly measured for ¹⁹⁹Hg, ²⁰¹Hg, H and D. Electronic structure information for HgH in its X²Σ ground state obtained from the hyperfine data is compared with theoretical results from several different computational methods. The hyperfine interactions in HgH are unusually large with A_iso(¹⁹⁹Hg) = 6859(3), A_dip(¹⁹⁹Hg) = 446(3), A_iso(H) = 730(2) and A_dip(H) = 0(2) MHz. A standard analysis of the hyperfine interactions demonstrates the need for a more in-depth theoretical treatment of HgH that should include relativistic effects. An interesting shift in spin density is observed when deuterium replaces hydrogen in HgH. The decreased spin density on deuterium, which was demonstrated in earlier studies, can now be more fully investigated since these new measurements confirm an associated increase in spin density on mercury     

The Saffman-Taylor problem for an extremely shear-thinning fluid

We consider a steady flow driven by pushing a finger of gasinto a highly shear-thinning power-law fluid, with exponentn, in a Hele-Shaw channel. We formulate the problem in termsof the streamfunction , which satisfies the p-Laplacian equation (with ), and investigate travelling wave solutions in the large-n (extreme shear-thinning) limit.We take a Legendre transform of the free-boundary problem for, which reduces it to a linear problem on a fixed domain. The solution to this problem is foundby using matched asymptotic expansions and the resulting shapeof the finger deduced (being, to leading order, a semi-infinitestrip). The nonlinear problem for the streamfunction is alsotreated using matched asymptotic expansion in the physical plane.The finger-width selection problem is briefly discussed in termsof our results.     

Preparation and spectroelectrochemical characterization of composite films of poly(3,4-ethylenedioxythiophene) with 4-(pyrrole-1-yl) benzoic acid

The possibility of incorporation of 4-(pyrrole-1-yl) benzoic acid, PyBA, during electrodeposition of poly(3,4-ethylenedioxythiophene), PEDOT, is demonstrated here. The resulting novel composite material has been fabricated as moderately thin (ca 200–300 nm thick) PEDOT/PyBA film on electrode surface. As evidenced from scanning tunneling microscopy (STM) and scanning electron microscopy (SEM), morphology of the composite film is dense and granular, and it is composed of larger granules in comparison to the PyBA-free PEDOT film. It is apparent from infrared reflectance absorption spectroscopy and spectroelectrochemical measurements that the PEDOT/PyBA composite film cannot be viewed as simple mixtures of PEDOT and PyBA components. Some specific (chemical) interactions between PEDOT and PyBA can be expected. The conducting polymer serves as a robust, positively charged conductive polmer matrix for anionic (carboxylate-group derivatized) partially polymerized PyBA structures. Upon incorporation of PyBA, the overall stability of PEDOT film (resistance to dissolution during prolonged voltammetric potential cycling) has been improved. The fact, that the composite PEDOT/PyBA film is capable of preconcentrating (under open circuit conditions) both cations (Cu²⁺) or anions implies the presence of both free (available for binding) carboxylate groups and positively charged PEDOT sites. The presence of PyBA in PEDOT seems to facilitate charge propagation in the composite film. “Contribution to the International Workshop on Electrochemistry of Electroactive Materials (WEEM-2006), Repino, Russia, 24–29 June 2006”.     

Assessment of Temporal Variability Trends for Inorganic Parameters in Ground Water

Abstract

The passage of environmental legislation in the United States has dramatically increased ground-water monitoring in the vicinity of point sources such as abandoned waste disposal sites, operational waste disposal sites, and municipal landfills. Even though these programs require sufficient sampling to define background conditions as part of the site characterization process, there is still a general absence of quantitative information on the magnitude and periodicity of temporal fluctuations for inorganic constituents in ground water. This paper presents an approach that has been used to develop an initial characterization of these temporal trends.

A search if on-going site investigation reports identified 18 facilities across the United States that had monthly monitoring data at a frequency of at least monthly for a period of one and a half years or longer (15 RCRA-C hazardous waste disposal facilities with monthly data for a period of 2–3 years, 2 research monitoring locations with biweekly monitoring data for a period of one and a half years, and a precious metal mining operation with daily monitoring data for a limited number of parameters for a period of one and a half years). The data from these site investigations were used to describe the temporal variability of several ground-water constituents including pH, specific conductance, sulfate, sodium, chloride, alkalinity, silica, iron, and manganese. An assessment of these data suggests that the magnitude of temporal ground-water fluctuations are on the order of 20 percent of the average concentration for chloride, 10 percent of the average concentration for sodium, manganese and specific conductance, 5 percent of the average concentration for alkalinity and pH, and essentially zero for silica. The apparent periodicities of these temporal fluctuations ranged from 40 weeks to approximately 2 years. The magnitude and periodicities in ground water are substantially smaller than those that have been reported and documented for the same constituents in surface waters. These differences are due to the fact that sunlight and wind, two energy factors that drive temporal cycles in surface water, do not exert a similar influence on the environmental chemistry of ground-water constituents.     

Modelling,simulation, animation,and real-time control (MoSART) for a class of electromechanical systems: a system-theoretic approach

This paper describes an interactive modelling, simulation, animation, and real-time control (MoSART) environment for a class of ‘cart-pendulum’ electromechanical systems that may be used to enhance learning within differential equations and linear algebra classes. The environment is useful for conveying fundamental mathematical/systems concepts through computer-aided analysis, design, graphical visualization, and 3D animation. Referred to as Cart-Pendulum Control3D-Lab1Control3D-Lab-short for control 3D animation laboratory. The author to whom correspondence should be addressed., the environment is based on Microsoft Windows/Visual C++/Direct-3D and MATLAB/Simulink2MATLAB and Simulant are trademarks of The Masterworks, Inc.. Pull-down menus provide access to systems/models/control laws, exogenous signals, parameters, animation models and visual indicators, a suite of (easy-to-modify) Simulant diagrams containing models and control laws, MATLAB m-files for detailed analysis and design, and detailed documentation for each of the above. Three blocks enable animation, joystick inputs, and real-time animation within Simulant. Examples are presented to illustrate the utility of the environment as a valuable tool for analysing/visualizing the above class of electromechanical systems and for enhancing mathematics instruction.     

连续波锁模P_r~（3＋）：YLF激光器

本文报导了采用氩离子激光器来泵浦Ｒｒ￣（３＋）：ＹＬＦ晶体，应用声光调制器实现了主动锁模；同时应用振动─高反射平面镜也实现了被动锁模，两种锁模均得到了ｐｓ光脉冲。据作者了解这是这种晶体材料的第一次锁模运转。     

PHOTODYNAMIC ACTION OF CHEMICALLY RELATED FLAVONES

Abstract— Flavone, polyhydroxyflavones (apigenin, fisetin, kaempferol, luteolin, myricetin, quercetin, resokaempferol and robinetin), polymethoxyflavones and acetylated and benzylated flavones were tested for photodynamic activity using Tetrahymena pyriformis T as the test organism. Among these compounds, polymethoxyflavones showed the highest order of activity, followed by flavone and then flavone derivatives with OH and OCH₃ groups. Resokaempferol was the only active polyhydroxyflavone, the remainder being inactive such as the benzyl-derivative. The methoxyl group in the 5–position and an increase in number of methoxyl groups from one to three in the phenolic portion of the flavonoid tended to decrease photodynamic activity. Tetrahymena killed photodynamically by polymethoxyflavones were morphologically altered by blister-like blebs. Polymethoxyflavones showed the lowest cytotoxicity and the greatest photodynamic activity among those flavonoids tested. The majority of the favonoids in this series have absorption spectra in the 320–370 nm region.     

Finite Element Methods for a Model for Full Waveform Acoustic Logging

A model is defined to simulate the propagation of waves in aradially symmetric, isotropic, composite system consisting ofa fluid-filled well bore ^f through a fluid-saturated poroussolid ^p. Biot's equations of motion are chosen to describe thepropagation of waves in ^p, while the standard equation of motionfor compressible inviscid fluids is used for ^f, with appropriateboundary conditions at the contact surface between ^f and ^p.Also, absorbing boundary conditions for the artificial boundariesof ^p are derived for the model, their effect being to make themtransparent for waves arriving normally First, results on the existence and uniqueness of the solutionof the differential problem are given and then a discrete-time,explicit finite element procedure is defined and analysed, withfinite element spaces suited for radially symmetric problemsbeing used for the spatial discretisation.     

Polyoxometallates as inorganic templates for electrocatalytic network films of ultra-thin conducting polymers and platinum nanoparticles

We develop a concept of fabrication of the multilayer network films on electrodes by exploring the ability of a Keggin-type polyoxometallate, phosphododecamolybdate (PMo(12)O(40)(3-)), to form stable anionic monolayers (templates) on carbon and metals including platinum. By repeated alternate treatments in the solution of PMo(12)O(40)(3-) (or in the colloidal suspension of polyoxometallate-protected Pt-nanoparticles) and in the solution of monomer (e.g. anilinium) cations, the amount of the material can be increased systematically (layer-by-layer) to form stable three-dimensional assemblies on electrode (e.g. glassy carbon) surfaces. In the resulting hybrid (organic-inorganic) films, the layers of negatively charged polyoxometallate, or polyoxometallate-protected (stabilized) Pt-nanoparticles, are linked or electrostatically attracted by ultra-thin layers of such positively charged conducting polymers as polyaniline (PANI), polypyrrole (PPy) or poly(3,4-ethylenedioxythiophene), PEDOT. Consequently, the attractive physicochemical properties of polymers and reactivity of polyoxometallate or noble metal particles are combined. The films are functionalized and show electrocatalytic properties towards reduction of nitrite, bromate, hydrogen peroxide or oxygen. They are of importance to the chemical and biochemical sensing as well as to the biochemical and medical applications.