Monte Carlo simulation of spatial distribution of X rays in multifilm targets. III: optimum design as applied to W/Al‐film targets

The brightness of the X‐ray source in a W/Al‐film target used for X‐ray projection microscopy was studied by an approach using the Monte Carlo simulation. Since continuous X rays generated in a thin film have a specific angular distribution of emission, the brightness of the continuous X‐ray source cannot simply be estimated on the assumption that the angular distribution is homogeneous. The newly developed approach using the Monte Carlo simulation enables the evaluation of the effective source size, angular distribution, and brightness of a continuous X‐ray source with sufficient accuracy that it leads to the optimum design of a high‐brightness X‐ray source for uses such as X‐ray projection microscopy. The Monte Carlo calculations were performed for W(Δz)/Al (200 µm)‐film targets with different thicknesses of W film, Δz, under bombardment of 60 kV electrons. The results have suggested an optimum design consisting of a W (2 µm)/Al (200 µm)‐film target as most promising for providing an X‐ray source of higher brightness than the W (5 µm)/Al (200 µm)‐film target, which has already been in practice for X‐ray projection microscopy. Copyright © 2006 John Wiley & Sons, Ltd.     

13C- and 1H-NMR and FTIR spectroscopic evidence for aggregate formation of organosilanes in toluene

 Changes in the ¹³C and ¹H NMR chemical shifts of the silane coupling agent (3-aminopropyltri-ethoxysilane, APTS) in toluene, which were detected as the concentration of APTS increased, have been interpreted in terms of the formation of micelles and the presence of a critical micelle concentration (CMC) equal to ca. 0.47 mol 1^-1. For the protons of the n-propyl segment, ¹H NMR splitting patterns have been analyzed and conformations of the propyl segment have been discussed. Plots of relative absorbance of the two NH₂ stretch IR bands at 3324 and 3384 cm^-1 against concentration provided an inflection point (corresponding to the CMC) at a value equal to 0.46 mol 1^-1. Thus, consideration of the interaction of APTS with a surface must take into account the presence of both APTS aggregates as well as APTS monomers. Received: 16 August 1996 Accepted: 26 September 1996     

Palladium-catalyzed preparation of α-allyl esters and α,β-unsaturated esters from saturated esters via their silyl acetals

Reaction of ketene silyl acetals with allylic carbonates in the presence of palladium-phosphine catalyst in dioxane gives α-allyl esters in high yields. When the reaction is carried out with phosphine-free palladium catalyst in nitriles, α,β-unsaturated esters are obtained in good yields.     

Dynamic coordination polymers with 4,4'-oxybis(benzoate): reversible transformations of nano- and nonporous coordination frameworks responding to present solvents

Reversible construction of a nanoporous framework from a nonporous framework has been found in the zinc(II) coordination polymer with 4,4'-oxybis(benzoate) (oba). [Zn(2)(oba)(2)(dmf)(2)].2DMF (1), which has 1 nm scale channels, transforms to the nonporous coordination polymer [Zn(oba)(H(2)O)] (2) with the loss of the open framework. Compound 2 on treatment with DMF reversibly yields nanoporous compound 1.     

Biological activities of chemically synthesized derivatives of lipid A: tetraacetyl-monosaccharides linked to 2,3-acyloxyacylglucosamine-4-phosphate

The mitogenicity and lethal toxicity of chemically synthesized lipid A analogs, in which 2,3-acyloxyacylglucosamine-4-phosphate (acyl-GlcN-4P) is linked to a tetraacetyl (Ac4)-monosaccharide, i.e., Ac4-glucose (A-211), Ac4-mannose (A-212), Ac4-galactose (A-213) or Ac4-glucosamine (A-214), were compared with those of tetraacetyl-3-deoxy-D-manno-2-octulosonic acid (Ac4-KDO) linked to acyl-GlcN-4P (A-203). All the compounds were capable of increasing incorporation of 3H-thymidine into splenocytes of C57BL/6 mice at doses of 50 and 100 micrograms/ml, but the mitogenic activity of A-203 at these doses seems to be stronger than those of the analogs. Intravenous injection of A-203, A-211, and A-213 did not exhibit lethal toxicity even at a high dose (50 micrograms/mouse) in C57BL/6 mice loaded with D-galactosamine hydrochloride. However, A-212 and A-214 showed lethality at the doses of 10 and 50 micrograms/mouse, respectively. The findings indicate that the biological activity of these compounds is affected by the kind of monosaccharide linked to acyl-GlcN-4P.     

Facile Synthesis and Palladium‐Catalyzed Cross‐Coupling Reactions of 2,3‐Bis(pinacolatoboryl)‐1,3‐butadiene

Treatment of 1,1‐bis(pinacolatoboryl)ethene with an excess of 1‐bromo‐1‐lithioethene gave 2,3‐bis(pinacolatoboryl)‐1,3‐butadiene in high yield. Palladium‐catalyzed cross‐coupling of the resulting diborylbutadiene with aryl iodides took place smoothly in the presence of a catalytic amount of Pd(OAc)₂/PPh₃ and aqueous KOH to give 2,3‐diaryl‐1,3‐butadienes in good yields. The coupling reaction with commercially available 4‐acetoxyphenylmethyl chloride under the same conditions followed by hydrolysis of the acetyl groups gave anolignan B in a one‐pot manner. A variety of [3]‐ to [6]dendralenes were synthesized by palladium‐catalyzed coupling of the diene or 1,1‐bis(pinacolato)borylethene with alkenyl or dienyl halides, respectively, in good yields.     

N-Trifluoroacetyl arenesulfenamides, effective precursors for synthesis of unsymmetrical disulfides and sulfenamides

N-Trifluoroacetyl arenesulfenamides (3) were effective precursors for the synthesis of unsymmetrical disulfides (4) and sulfenamides (5). Reactions of 3 with a variety of aromatic thiols at room temperature were generally complete within 5 min and gave unsymmetrical diaryl disulfides in high yields. Aralkyl disulfides were isolated in high yields from the reaction of 3 with aliphatic thiols. The nucleophilic substitution reactions of 3 with amines proceeded smoothly and provided N-substituted sulfenamides in good to excellent yields.     

The effect of tensor correlations on isovector operators

Very simple relations between renormalization factors and corrections to the GT-type-decay operator, isovector magnetic moment and coulomb energy differences between mirror nuclei due to tensor correlations are obtained.     

Alignment behaviour of the discotic nematic phase of 2,3,6,7,10,11-hexa(4-n-octyloxybenzoyloxy)triphenylene on polyimide and cetyltrimethylammonium bromide coated substrates

The orientational behaviour of the nematic discotic phase of 2,3,6,7,10,11-hexa(4-n-octyloxybenzoyloxy)triphenylene (C8OBT) on substrates coated with a polyimide or cetyltrimethylammonium bromide (CTAB) was investigated by polarizing optical microscopy. The averaged order parameters and directions of the triphenylene core and the carbonyl groups of C8OBT were evaluated by an infrared dichroic method. The discotic nematic (N_D) phase of C8OBT exhibits a homeotropic alignment on a polyimide film, a typical nematic schlieren texture on a glass substrate, and a tilted or planar homogeneous alignment on a CTAB-coated substrate. The order parameter of the triphenylene core is higher on a polyimide film (S = 0.6) than on a CTAB-coated substrate (S = 0.2), whereas that of the carbonyl groups remains roughly constant at 0.2 to 0.3 independent of the substrate for the N_D phase.