Modification of Mineral Powder by Various Organic Materials: Their Potential as Reinforcement for Unsaturated Polyester Composites

Russian Journal of Applied Chemistry - Industrial by product dumped from iron making industry (slag) has been modified by various chemical agents, particularly, paraffin wax, liquid nitrile...     

Catenation and Aggregation of Multi‐Cavity Coordination Cages

A series of metal‐mediated cages, having multiple cavities, was synthesized from Pd^II cations and tris‐ or tetrakis‐monodentate bridging ligands and characterized by NMR spectroscopy, mass spectrometry, and X‐ray methods. The peanut‐shaped [Pd₃L¹₄] cage deriving from the tris‐monodentate ligand L¹ could be quantitatively converted into its interpenetrated [5Cl@Pd₆L¹₈] dimer featuring a linear {[Pd‐Cl‐]₅Pd} stack as an unprecedented structural motif upon addition of chloride anions. Small‐angle neutron scattering (SANS) experiments showed that the cigar‐shaped assembly with a length of 3.7 nm aggregates into mono‐layered discs of 14 nm diameter via solvophobic interactions between the hexyl sidechains. The hepta‐cationic [5Cl@Pd₆L¹₈] cage was found to interact with polyanionic oligonucleotide double‐strands under dissolution of the aggregates in water, rendering the compound class interesting for applications based on non‐covalent DNA binding.     

Simultaneous Determination of 11 Elements in Fly Ash by Inductively Coupled Plasma Orthogonal Acceleration Time-of-Flight Mass Spectrometry After Closed-Vessel Microwave-Assisted Extraction with Ammonium Fluoride

A method for simultaneous multi-element analysis of fly ash samples by inductively coupled plasma orthogonal acceleration time-of-flight mass spectrometry (oaTOF-ICP-MS) after closed-vessel microwave extraction with ammonium fluoride was introduced here. Corrosive and/or toxic acids like HF, HCl or HClO₄, as well as HNO₃, which are commonly used during sample preparation of the fly ash samples, are avoided in this method. The spectral effects due to the formation of different Cl, Na, K, Ca, Mg-containing polyatomic species interfering with the determination of a number of elements like As, Se or Ni during the oaTOF-ICP-MS analysis are negligible. Under the optimum experimental extraction conditions evaluated using a fractional factorial design (10 mg of the sample extracted with 5 mL of 140 g/L NH₄F for 10 min at 200°C), analysis of the resulting supernatant with Rh as an internal standard enabled precise and accurate simultaneous determination of 11 elements (Li, Be, Ni, As, Se, Rb, Sb, Cs, W, Tl and U) at trace and ultratrace levels. The accuracy was assessed by analysing two certified reference materials, namely Fine Fly Ash CTA-FFA-1 and Constituent Elements in Coal Fly Ash Standard Reference Material® 1633b. The precision of the reported method was better than 10%.     

The protective role of melanin against UV damage in human skin

Human skin is repeatedly exposed to UVR that influences the function and survival of many cell types and is regarded as the main causative factor in the induction of skin cancer. It has been traditionally believed that skin pigmentation is the most important photoprotective factor, as melanin, besides functioning as a broadband UV absorbent, has antioxidant and radical scavenging properties. Besides, many epidemiological studies have shown a lower incidence for skin cancer in individuals with darker skin compared to those with fair skin. Skin pigmentation is of great cultural and cosmetic importance, yet the role of melanin in photoprotection is still controversial. This article outlines the major acute and chronic effects of UVR on human skin, the properties of melanin, the regulation of pigmentation and its effect on skin cancer prevention.     

Preliminary investigation of a medium power argon radiofrequency capacitively coupled plasma as atomization cell in atomic fluorescence spectrometry of cadmium

The single ring electrode radiofrequency capacitively coupled plasma torch (SRTr.f.CCP) operated at 275W, 27.12 MHz and Ar flow rate below 0.7 lmin(-1) was investigated for the first time as atomization cell in atomic fluorescence spectrometry (AFS) using electrodeless discharge lamps (EDL) as primary radiation source and charged coupled devices as detector. The signal to background ratio (SBR) and limit of detection for Cd determination by EDL-SRTr.f.CCP-AFS were compared to those obtained in atomic emission spectrometry using the same plasma torch. The detection limit in fluorescence was 4.3 ngml(-1) Cd compared to 65 ngml(-1) and 40 ngml(-1) reported in r.f.CCP-atomic emission (AES) equipped with single or double ring electrode. The lower detection limit in EDL-SRTr.f.CCP-AFS is due to a much better SBR in fluorescence. The limit of detection was also compared to those in atomic fluorescence with inductively coupled plasma (0.4 ngml(-1)), microwave plasma torch (0.25 ngml(-1)) and air-acetylene flame (8 ngml(-1)). The influence of light-scattering through the plasma and the secondary reflection of the primary radiation on the wall of the quartz tube on the analytical performance are discussed. The non-spectral matrix effects of Ca, Mg and easily ionized elements are much lower in EDL-SRTr.f.CCP-AFS compared to SRTr.f.CCP-AES. The new technique was applied in the determination of Cd in contaminated soils, industrial hazardous waste (0.4-370 mgkg(-1)) and water (113 microgl(-1)) with repeatability of 4-8% and reproducibility in the range of 5-12%, similar to those in ICP-AES. The results were checked by the analysis of a soil and water CRM with a recovery degree of 97+/-9% and 98+/-4%, for a confidence limit of 95%. The present EDL-SRTr.f.CCP-AFS is a promising technique for Cd determination in environmental samples.     

Validation of the Tessier scheme for speciation of metals in soil using the Bland and Altman test

The Tessier extraction method was used for speciation of Cu, Pb, Zn, As, Fe and Mn in a large concentration range in contaminated soil with various mineralogical compositions. The results were compared by X-ray fluorescence spectrometry (XRF) as a reference method using the Bland and Altman test. A sum of five fractions (exchangeable, bound to carbonates, Fe-Mn oxides, organic matter and residual forms) was compared with the total content determined on solid matrix by the reference method. A good agreement between the methods in the whole concentration range was found for Cu, Zn, As, and Fe. For Mn and Pb, XRF was found suitable to verify the sequential extraction only for concentrations above 250 mg kg⁻¹. This was a consequence of a poorer reproducibility of Pb extraction using the Tessier scheme due to a great difference in the mineralogical composition and the diversity of the Pb species identified in soil. The poorer result of Mn was attributed to the spectral interference of Fe in XRF. Presented at the 34th International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 21–25 May 2007.     

Carbon supported CdSe nanocrystals

Insights to the mechanism of CdSe nanoparticle attachment to carbon nanotubes following the hot injection method are discussed. It was observed that the presence of water improves the nanotube coverage while Cl containing media are responsible for the shape transformation of the nanoparticles and further attachment to the carbon lattice. The experiments also show that the mechanism taking place involves the right balance of several factors, namely, low passivated nanoparticle surface, particles with well-defined crystallographic facets, and interaction with an organics-free sp2 carbon lattice. Furthermore, this procedure can be extended to cover graphene by quantum dots.     

Leaching test for calcined kaolinite and kaolinite/TiO<Subscript>2</Subscript> photoactive composite

Kaolinite is a suitable material for fixing TiO₂ nanoparticles in a composite form. The kaolinite/TiO₂ composite has promising photoactive properties which are as important as is the possible impact of the composite on the environment. Accordingly, the stability of the kaolinite/TiO₂ composite dried at 105°C (KTI1) and calcined at 600 °C (KTI6) and the stability of the original kaolinite treated at various temperatures (105–800 °C) were studied by the leaching test in accordance with European standard BS EN 12457-2:2002 (British Standards Institution, 2002). The stability was evaluated on the basis of elements leached from the materials to extraction agents. Atomic emission spectrometry with inductively coupled plasma was used for determining the concentration of elements. In order to better understand the process of calcination and the structure changes in the kaolinite/TiO₂ composite and calcined kaolinite, the materials were evaluated using X-ray powder diffraction and infrared spectroscopy with Fourier transformation. The processes of kaolinite dehydroxylation and metakaolinite formation were observed. Kaolinite is an appropriate carrier for composite preparation due to its stability even after its treatment at high temperatures. The experiments confirmed the TiO₂ nanoparticles to be very strongly bound to the kaolinite surface. On the other hand, the experiments demonstrated that the presence of TiO₂ on the kaolinite surface caused the release of Al in high concentrations to the final extracts, especially after kaolinite/TiO₂ composite calcination.     

Formation of coordination compounds with aniline in the interlayer space of Ca<Superscript>2+</Superscript>-, Cu<Superscript>2+</Superscript>- and Fe<Superscript>3+</Superscript>-exchanged montmorillonite

The influence of Ca²⁺-, Cu²⁺- and Fe³⁺-exchanged montmorillonite (MMT) on the type of interaction with aniline in the interlayer space of MMT has been studied by means of X-ray powder diffraction and infrared spectra. Results of X-ray diffraction showed that aniline was successfully intercalated into the interlayer space of MMT. Based on IR spectra evaluation, aniline was indirectly coordinated through a water-bridge in Ca²⁺- and Fe³⁺-MMT and it was indirectly coordinated through a water-bridge as well as protonated in Cu²⁺-MMT (the spectrum of protonated aniline showed deformation and changes in the NH ₃ ⁺ absorption at approximately 1521 cm^?1). It is important to point out that Cu²⁺-MMT indirect coordination and protonation occur simultaneously.