Probing ruthenium-acetylide bonding interactions: synthesis, electrochemistry, and spectroscopic studies of acetylide-ruthenium complexes supported by tetradentate macrocyclic amine and diphosphine ligands

The synthesis and spectroscopic properties of trans-[RuL4(C[triple bond]CAr)2] (L4 = two 1,2-bis(dimethylphosphino)ethane, (dmpe)2; 1,5,9,13-tetramethyl-1,5,9,13-tetraazacyclohexadecane, 16-TMC; 1,12-dimethyl-3,4:9,10-dibenzo-1,12-diaza-5,8-dioxacyclopentadecane, N2O2) are described. Investigations into the effects of varying the [RuL4] core, acetylide ligands, and acetylide chain length for the [(-)C[triple bond]C(C6H4C[triple bond]C)(n-1)Ph] and [(-)C[triple bond]C(C6H4)(n-1)Ph] (n = 1-3) series upon the electronic and electrochemical characteristics of trans-[RuL4(C[triple bond]CAr)2](0/+) are presented. DFT and TD-DFT calculations have been performed on trans-[Ru(L')4(C[triple bond]CAr)2](0/+) (L' = PH3 and NH3) to examine the metal-acetylide pi-interaction and the nature of the associated electronic transition(s). It was observed that (1) the relationship between the transition energy and 1/n for trans-[Ru(dmpe)2{C[triple bond]C(C6H4C[triple bond]C)(n-1)Ph}2] (n = 1-3) is linear, and (2) the sum of the d(pi)(Ru(II)) --> pi*(C[triple bond]CAr) MLCT energy for trans-[Ru(16-TMC or N2O2)(C[triple bond]CAr)2] and the pi(C[triple bond]CAr) --> d(pi)(Ru(III)) LMCT energy for trans-[Ru(16-TMC or N2O2)(C[triple bond]CAr)2]+ corresponds to the intraligand pi pi* absorption energy for trans-[Ru(16-TMC or N2O2)(C[triple bond]CAr)2]. The crystal structure of trans-[Ru(dmpe)2{C[triple bond]C(C6H4C[triple bond]C)2Ph}2] shows that the two edges of the molecule are separated by 41.7 A. The electrochemical and spectroscopic properties of these complexes can be systematically tuned by modifying L4 and Ar to give E(1/2) values for oxidation of trans-[RuL4(C[triple bond]CAr)2] that span over 870 mV and lambda(max) values of trans-[RuL4(C[triple bond]CAr)2] that range from 19,230 to 31,750 cm(-1). The overall experimental findings suggest that the pi-back-bonding interaction in trans-[RuL4(C[triple bond]CAr)2] is weak and the [RuL4] moiety in these molecules may be considered to be playing a "dopant" role in a linear rigid pi-conjugated rod.     

Generic method for systematic phase selection and method development of biochromatographic processes. Part I. Selection of a suitable cation-exchanger for the purification of a pharmaceutical protein

Even if the first protein therapeutics are now for more than 20 years on the market the selection of suitable adsorbents for the preparative downstream processing (DSP) of these biomolecules as well as the method development towards process conditions are still based mainly on 'trial and error'. Therefore, theses processes are not perfectly efficient, but indeed very time consuming and laborious. In this study a novel systematic method is introduced to find a suitable adsorbent (not necessarily the best one) with appropriate separation parameters for a specific separation with reduced effort. Following this strategy, the adsorbents must first be packed into columns under preparative conditions and then characterized completely with regard to, e.g. pressure drop, k'-values, plate heights (HETP curves), selectivity and capacity by using test substances, which are similar in their characteristics (molecular mass, size, charge distribution, hydrophobicity) to the target proteins. With the database once determined, a preselection of most suitable adsorbents including separation parameters is made regarding chromatographic and also economical properties. After this, preparative experiments must be conducted with a reduced number of adsorbents to figure out the individual influence of side components. This approach is demonstrated for the separation of an exemplary industrial protein mixture using cation-exchange chromatography (CEX). Characterization of different weak CEX-adsorbents is illustrated. After comparing these phases with each other, a first preselection and a prediction of suitable adsorbents is made. In the following preparative separation conditions (load, velocity, gradient) are determined for the preparative separations using the database and results of some additional experiments. The final comparison of separation performance in preparative scale confirms this selection and so the applicability of the new method.     

Condensation reaction of 3-(methacryloxypropyl)-trimethoxysilane and diisobutylsilanediol in non-hydrolytic sol-gel process

The condensation reaction of 3-methacryloxypropyl-trimethoxysilane (MPTS) and diisobutylsilanediol (DIBSD) in a non-hydrolytic sol-gel process was investigated in terms of the reaction time and the catalyst amount for fabrication of inorganic-organic hybrid materials. The degree of condensation, which was characterized by ²⁹Si NMR, ¹H NMR and Abbe refractometry, increases with increased the reaction time and greater catalyst amount. However, a the large catalyst amount breaks the methacryl group during the condensation reaction. Thus, the reaction time and the catalyst amount were optimized to synthesize the condensed methacryl oligosiloxanes.     

Ultraviolet photochemistry of ethane: implications for the atmospheric chemistry of the gas giants

Chemical processing in the stratospheres of the gas giants is driven by incident vacuum ultraviolet (VUV) light. Ethane is an important constituent in the atmospheres of the gas giants in our solar system. The present work describes translational spectroscopy studies of the VUV photochemistry of ethane using tuneable radiation in the wavelength range 112 ≤ λ ≤ 126 nm from a free electron laser and event-triggered, fast-framing, multi-mass imaging detection methods. Contributions from at least five primary photofragmentation pathways yielding CH₂, CH₃ and/or H atom products are demonstrated and interpreted in terms of unimolecular decay following rapid non-adiabatic coupling to the ground state potential energy surface. These data serve to highlight parallels with methane photochemistry and limitations in contemporary models of the photoinduced stratospheric chemistry of the gas giants. The work identifies additional photochemical reactions that require incorporation into next generation extraterrestrial atmospheric chemistry models which should help rationalise hitherto unexplained aspects of the atmospheric ethane/acetylene ratios revealed by the Cassini–Huygens fly-by of Jupiter.

The vacuum ultraviolet photodissociation dynamics of ethane provide clues for modelling the atmospheric chemistry of the gas giants.     

Chloro­bis­(thio­urea‐κS)copper(I) bis(4,5‐di­aza­fluoren‐9‐one) mono­hydrate

The title compound, [CuCl(CH₄N₂S)₂]·2C₁₁H₆N₂O·H₂O, consists of mol­ecules of a Cu^I–thio­urea complex, free 4,5‐di­aza­fluoren‐9‐one (dafone) and crystalline water. The planar complex mol­ecule has trigonal coordination geometry around the Cu^I atom. The dafone and water mol­ecules, which are hydrogen bonded to the Cu^I complex, are approximately coplanar with this complex. The crystal displays a sheet structure and π–π stacking is observed between neighbouring sheets.     

Modification of the electrokinetic properties of reversible electrophoresis gels for the separation and preparation of DNA

The effect of adding linear polymers to a novel reversible electrophoretic was measured. Reversible gels are formed using the polyanionic carbohydrate polymer, gellan gum. Gellan gum forms strong stable gels in the presence of divalent cations or diamines. The gels are reversible (return to solution) by changing the ionic environment or pH. Gellan gum is an anionic polymer, and the electrophoresis gels have considerable electroosmotic flow (EOF) toward the negative electrode. We measured the EOF in gellan gum electrophoresis gels as a function of gel concentration, buffer composition, and linear polymer additive. The linear polymers used in this study were polyethylene oxide and hydroxyethyl cellulose. Both polymers reduced EOF in the gels, in a manner dependent on molecular weight. Polymers with high molecular weight were more effective at reducing EOF. The addition of polymers increased the resolution of low molecular weight DNA. Native gellan gum resolved DNA from approx 50,000 to 1000 bp. Addition of the polymers resolved DNA down to approx 50 bp, in some instances. The influence of the polymers on circular plasmid DNA was also investigated. Addition of high molecular weight polyethylene oxide reduced the electrophoretic mobility of the nicked circular form compared to the supercoiled form.     

Synthesis of 4-[3-(1H)-indolyl]-2-[N-guanidinomethyl]thiazole dihydrochloride

The title compound 3b was synthesized in three steps from acetaminothioacetamide ( 4b ) in 15% overall yield. This represents the first synthesis of a 2-guanidinomethylthiazole, which is a homolog of an important pharmacophore, 2-guanidinothiazole.     

Cu(I) and Ag(I) complexes of chalcogenide derivatives of the organometallic ligand dppf and the dppa analogue

New Cu(I) and Ag(I) complexes were prepared by reaction of [M(NCCH₃)₄][X] (M = Cu or Ag; X = BF₄ or PF₆) with the bidentate chalcogenide ligands Ph₂P(E)NHP(E)Ph₂ (E = S, S₂dppa; E = Se, Se₂dppa), and dpspf (1,1′-bis(diphenylselenophosphoryl)ferrocene). Copper and silver behaved differently. While three molecules of either S₂dppa and Se₂dppa bind to a distorted tetrahedral Cu₄ cluster, with deprotonation of the ligand, 1:2 complexes of the neutral ligands are formed with Ag(I), with a tetrahedral coordination of the metal. The [Cu₄{Ph₂P(Se)NP(Se)Ph₂}₃]⁺ clusters assemble as dimers, held together by weak Se?Se distances interactions. Another dimer was observed for the [Ag(dpspf)]⁺ cation, with two short Ag?Se distances. DFT and MP2 calculations indicated the presence of attracting interactions, reflected in positive Mayer indices (MI). The electrochemistry study of this species showed that both oxidation and reduction took place at silver.     

Zum Mechanismus der photochemischen Umwandlung von 2-Alkyl-indazolen in 1-Alkyl-benzimidazole. I. Struktur und Reaktivität eines Zwischenproduktes

Mechanistic studies on the photoisomerization of 2-alkyl-indazoles into 1-alkyl-benzimidazoles. I. Structure and reactivity of an intermediate. 2-Alkyl-indazoles ( 1 ) undergo photochemical isomerization to 1-alkyl-benzimidazole via previously unknown intermediates 3 (Scheme 1). In the present paper the structure and reactivity of these intermediates are discussed. Low-temperature irradiation (?60°) of 1 b with 300 nm light gives 3 b in quantitative yield. 3 b is transformed during warm-up to 1 b and 2 b (UV.-evidence). The formations of 1 and 2 show the same temperature dependence but their ratio is found to be temperature-independent. In contrast to the above behaviour, low-temperature irradiation with 250 nm light of 3 b yields 1 b only (no 2 b ). These findings are consistent with the proposed reaction mechanism 2 c in Scheme 2. On the basis of spectroscopic properties and the described reaction pathways, it appears that the most suitable structure for intermediate 3 is a 7,8-diaza-tricyclo[4.3.0.0^7,9]nona-2,4,6(10)-trien ( 9 ). In Scheme 4 the reaction pathway for the iudazole-benzimidazole-rearrangement is summarized.