Aqueous polymerization of acrylonitrile by ascorbic acid–peroxodisulfate redox system

The polymerization of acrylonitrile initiated by an ascorbic acid–peroxodisulfate redox system was studied in an aqueous solution at 35°C in the presence of air. Molecular oxygen was found to have no effect on the polymerization reaction. An increase in ionic strength slightly increased the rate. The overall rate of polymerization, R_p, showed a square dependence on [monomer] and a half-order dependence on [peroxodisulfate]. A first-order dependence on [ascorbic acid] at low concentrations (<3.0 × 10^?3 mol L^?1) followed by a decrease in R_p at higher concentrations of ascorbic acid (>3.0 × 10^?3 mol L^?1) was also noted. R_p remained unchanged up to 40°C and showed a decline thereafter. Addition of catalytic amounts of cupric ions decreased the rate whereas ferric ions were found to increase the rate. Added sulfuric acid in the range (6.0?50.0) × 10^?5 mol L^?1 decreased the R_p.     

Production of indigotin in submerged culture using morchella nov. ES-1

A new strain of the fungusMorchella nov. ES-1 (ATCC 20951) that produces blue pigment in submerged culture has been isolated. The blue pigment was extracted by chloroform or ethyl acetate treatment. The crude extract when chromatographed yielded three fractions; a blue one has been identified by mass spectrometry as indigotin. Fermentation studies using enriched media revealed that maximum accumulation of indigotin in culture was approx 24 mg/L in 168 h.     

A Chebotarev Theorem for finite homogeneous extensions of shifts

We derive a Chebotarev Theorem for finite homogeneous extensions of shifts of finite type. These extensions are of the form :X×G/H→X×G/H where (x,gH)=(σx, α(x)gH), for some finite groupG and subgroupH. Given a σ-closed orbit τ, the periods of the -closed orbits covering τ define a partition of the integer |G/H|. The theorem then gives us an asymptotic formula for the number of closed orbits with respect to the various partitions of the integer |G/H|. We apply our theorem to the case of a finite extension and of an automorphism extension of shifts of finite type. We also give a further application to ‘automorphism extensions’ of hyperbolic toral automorphisms. Financially supported by Universiti Kebangsaan Malaysia     

Computational studies on glyceraldehyde and glycine Maillard reaction—I

Mechanisms for the initial stage of glyceraldehyde and glycine Maillard reaction under different pH conditions have been proposed, following usually the Hodge-scheme. Computations have been performed on the mechanisms at the standard state to test the possibility of the formation of different compounds, through evaluating the changes in Gibb's free energy during the reaction. Electronic energy changes during the reaction have also been evaluated. Glyceraldehyde+deprotonated glycine reaction has been found to be the most favorable for the formation of the Amadori rearrangement products in both gaseous and aqueous states. Due to the possibility of the production of both enol and keto forms of the Amadori rearrangement product, the rate of browning in glyceraldehyde+deprotonated glycine reaction is assumed to be faster than the others. Glyceraldehyde+unionized glycine reaction has been found to be more plausible for the formation of the keto form of the Amadori rearrangement products, particularly, in the gaseous phase. Glyceraldehyde+protonated glycine and glyceraldehyde+glycine zwitterion reactions are not favorable for the formation of the Amadori rearrangement products. Formation of hydroxyacetaldehyde from glyceralaldehyde, as one of the possible C2-fragmentation product, has been found to be favorable in the aqueous state.     

Reactions of [HOs3(CO)8{µ3-Ph2PCH(R)P(Ph)C6H4}] (R = H,Me) with Bu3SnH: synthesis and structure of bimetallic Os-Sn clusters

Reactions of unsaturated [HOs₃(CO)₈{µ₃-Ph₂PCH(R)P(Ph)C₆H₄}] (R?=?H, Me) with Bu₃SnH are examined. [HOs₃(CO)₈{µ₃-Ph₂PCH(R)P(Ph)C₆H₄}] reacts with Bu₃SnH at room temperature to afford [H₂Os₃(CO)₈(SnBu₃){µ₃-Ph₂PCH(R)P(Ph)C₆H₄}] (1) via oxidative addition of the Sn?H bond to the parent cluster. Heating 1 in refluxing toluene leads to the formation of [H₂Os₃(CO)₇(SnBu₃){µ₃-Ph₂PCH(R)P(Ph)C₆H₄}] (2) through decarbonylation. Cluster 2 exists in two isomeric forms in solution which has been probed by VT NMR spectroscopy. The new Os-Sn bimetallic clusters have been characterized by a combination of analytical and spectroscopic data together with single-crystal X-ray diffraction analysis.

Graphic abstract

     

Salt-induced acceleration of chemical reactions in cellulose nanopores

Chemical reactions in charged nanopores, such as present in cellulose fibers, can be accelerated by adding an inert salt, that does not participate in the reaction. Due to a Donnan-like equilibrium between ions inside and outside the pores, the concentration of co-ions in the nanopores (having a charge of the same sign as that of the pore wall), is lower than the concentration in the bulk. The co-ion concentration in pores can be increased by adding an inert salt, which shifts the Donnan equilibrium. The increased concentration of reactants in pores results in faster reaction kinetics. Reactions of cellulose with periodate confirm these predictions.     

A Review on Effects of Lubricant Formulations on Tribological Performance and Boundary Lubrication Mechanisms of Non-Doped DLC/DLC Contacts

Tribological efficiency of industrial applications involving boundary lubrication regime can be improved to an appreciable extent by the deposition of hard coatings on interacting surfaces. Among such coatings, diamond-like carbon (DLC) coatings are considered to be one of the most suitable ones for the said role. DLC coatings possess a unique combination of physical, chemical, and material properties due to which they can help in minimizing friction-induced energy and material losses even under starved lubrication conditions. Since commercial lubricants are optimized for steel surfaces, therefore, a lot of experimental investigations were carried out to analyze the tribological compatibility of these lubricants with various DLC coatings. However, there is still a lack of understanding about how DLC coatings interact with conventional lubricant additives. Some researchers reported tribologically beneficial interactions between DLC coatings and formulated lubricants while others observed no such behavior. To address these inconsistencies, there is a need to rearrange the published data in a more apprehensible and organized manner with a special emphasis on the mechanisms responsible for a particular tribological behavior. In this way, it can be determined whether synergistic or antagonistic correlation exists between a particular DLC-lubricant combination and research on DLC coatings can be continued in a logical way. In this article, most widely investigated non-doped DLC coatings (ta-C, a-C:H, a-C, and ta-C:H) are tribologically analyzed. Average values of friction and wear coefficients are calculated for various DLC-lubricant combinations using already published data and compared to quantify the effectiveness of a particular lubricant additive in enhancing tribological characteristics of symmetrical non-doped DLC contacts. Moreover, tribological performance parameters of non-doped DLC coatings are compared with those of doped-DLC coatings to understand differences in their tribological behavior in combination with additives.     

Temperature Dependence of 1H Paramagnetic Chemical Shifts in Actinide Complexes,Beyond Bleaney's Theory: The AnVIO22+–Dipicolinic Acid Complexes (An=Np,Pu) as an Example

Actinide +VI complexes ( = , and ) with dipicolinic acid derivatives were synthesized and characterized by powder XRD, SQUID magnetometry and NMR spectroscopy. In addition, and complexes were described by first principles CAS based and two-component spin-restricted DFT methods. The analysis of the ¹H paramagnetic NMR chemical shifts for all protons of the ligands according to the X-rays structures shows that the Fermi contact contribution is negligible in agreement with spin density determined by unrestricted DFT. The magnetic susceptibility tensor is determined by combining SQUID, pNMR shifts and Evans’ method. The SO-RASPT2 results fit well the experimental magnetic susceptibility and pNMR chemical shifts. The role of the counterions in the solid phase is pointed out; their presence impacts the magnetic properties of the complex. The temperature dependence of the pNMR chemical shifts has a strong contribution, contrarily to Bleaney's theory for lanthanide complexes. The fitting of the temperature dependence of the pNMR chemical shifts and SQUID magnetic susceptibility by a two-Kramers-doublet model for the complex and a non-Kramers-doublet model for the complex allows for the experimental evaluation of energy gaps and magnetic moments of the paramagnetic center.     

Hybrid EuIII Coordination Luminophore Standing on Two Legs on Silica Nanoparticles for Enhanced Luminescence

In this study, we have demonstrated a two-legged, upright molecular design method for monochromatic and bright red luminescent Ln^III-silica nanomaterials. A novel Eu^III-silica hybrid nanoparticle was developed by using a doubly binding TPPO−Si(OEt)₃ (TPPO: triphenyl phosphine oxide) linker. The TPPO−Si(OEt)₃ was confirmed by ¹H, ³¹P, ²⁹Si NMR spectroscopy and single-crystal X-ray analysis. Luminescent Eu(hfa)₃ and Eu(tfc)₃ moieties (hfa: hexafluoroacetylacetonate, tfc: 3-(trifluoromethylhydroxymethylene)camphorate) were fixed onto TPPO−Si(OEt)₃-modified silica nanoparticles, producing Eu(hfa)₃(TPPO−Si)₂-SiO₂ and Eu(tfc)₃(TPPO−Si)₂-SiO₂, respectively. Eu(hfa)₃(TPPO−Si)₂−SiO₂ exhibited the higher intrinsic luminescence quantum yield (93 %) and longer emission lifetime (0.98 ms), which is much larger than those of previously reported Eu^III-based hybrid materials. Eu(tfc)₃(TPPO−Si)₂−SiO₂ showed an extra-large intrinsic emission quantum yield (54 %), although the emission quantum yield for the precursor Eu(tfc)₃(TPPO−Si(OEt)₃)₂ was found to be 39 %. These results confirmed that the TPPO−Si(OEt)₃ linker is a promising candidate for development of Eu^III-based luminescent materials.