Effect of copper addition on some properties of rapidly solidified lead-free Sn–-10 wt% Zn alloys

This study aimed at investigating the effect of adding copper (Cu) on some properties of the lead-free alloys which rapidly solidified from melt. X-ray analysis, hardness, elastic modulus, electrical conductivity and resistivity were studied. The results indicated that the alloy hardness and elastic modulus improved by increasing the copper (Cu) content and decreasing the zinc (Zn) content. The electrical conductivity ranged from 0.250 to 0.847?×?10⁷ ohm^?1 m^?1 for the alloy under study. The electrical resistivity increases linearly with temperature until the melting point is reached. The residual resistivity results from disturbances in the lattice rather than caused by thermal vibration and the most drastic increases in the residual resistivity are caused by foreign atoms in solid solution with matrix metal. The electrical resistivity values ranged from 11.8 to 40?×?10^?8 ohm m, when the copper content changed from 0.0 to 2.0 wt% and zinc changed from 8.0 to 10.0 wt%.     

Fluorescence Screening of Organophosphorus Pesticides in Water by an Enzyme Inhibition Procedure on TLC Plates

JPC – Journal of Planar Chromatography – Modern TLC - An enzymatic inhibition method sufficiently sensitive for rapid screening of seven organophosphorus pesticides in water is...     

3D simulation of radionuclide transport in porous media

We present an efficient and easily implementable finite volume method simulating radionuclide transport through highly heterogeneous grounds in three space dimensions. The numerical concentration of the transported chemicals are proved to remain nonnegative and stable. Then, we run a realistic test case in which some radioactive iodine I¹²⁹ particles are released from a leak in an underground nuclear waste disposal site. The question of whether the radionuclide invades the underground and reach the ground surface is investigated. Because of the 3D nature of the problem, a particular emphasis is made on the control of CPU time. Copyright © 2009 John Wiley & Sons, Ltd.     

Charge carriers and mobility of Cu-Ti ferrite

The concentration and drift mobility of charge carriers in Cu_1–x Ti _x Fe₂O₄ ferrite are calculated, over a wide range of temperatures (300–773 K), employing d.c. conductivity and thermoelectric power data. With increasing temperature the concentration of charge carriers decreases whilst the drift mobility exhibits an exponential increase. Over the above-mentioned temperature range, the obtained density of charge carriers varies between 10²¹ and 10²² cm^–3 whereas the drift mobility has values between 10^–8 and 10^–4 cm²/V s. The results are discussed on the basis of a small-polaron hopping conduction. The activation of the d.c. conductivity has been attributed to the thermal activation of the mobility.     

A new highly efficient three-component domino Heck-Diels-Alder reaction with bicyclopropylidene: rapid access to spiro[2.5]oct-4-ene derivatives

Bicyclopropylidene (1) was found to surpass even methyl acrylate (17 a) in its rate of undergoing carbopalladation with aryl- or alkenylpalladium species, leading to substituted allylidenecyclopropanes 5, 7 and 10, mostly in high yields (37-78 %). These dienes and cross-conjugated trienes react in a Diels-Alder mode with dienophiles to give spiro[2.5]octenes 18 a-Ph, 18 b-Ph and 18 a-Vin, respectively, in good yields (89, 69 and 65 %). The overall transformation can be achieved as a one-pot three-component reaction with a variety of dienophiles to furnish the domino Heck-Diels-Alder products 18 regioselectively in most cases in good to very high yields (49-100 %). The reaction of 1 with iodobenzene (2-Ph) and 17 a gave 18 a-Ph in virtually quantitative yield-also on a gram scale-using only 1 mol % of catalyst, and even bromobenzene (22) gave 18 a-Ph in 59 % yield. Bicyclopropylidene (1), in the presence of palladium acetate/triphenylphosphane underwent rearrangement to allylidenecyclopropane (5-H), which in turn dimerized (73 %) in the absence of other reaction partners, or could be trapped by diethyl fumarate (17 c) to give the Diels-Alder adduct 18 c-H in 45 % yield. The coupling of oligoiodobenzenes with 1 and subsequent cycloaddition could be extended to a multicomponent reaction. In this way, 1,4-diiodobenzene (37), 1 and an alkyl acrylate gave the products 38 of a twofold Heck-Diels-Alder reaction in up to 87 % yield, 1,3,5-triiodobenzene (39) reacted in up to 72 % yield and ultimately 1,2,4,5-tetraiodobenzene (41) gave the fourfold domino Heck-Diels-Alder product 42 in 47 % isolated yield, in a single operation in which 12 new carbon-carbon bonds were formed.     

Wireless transmission using cooperation on demand

Mobile users with single antennas can still take advantage of spatial diversity through repetition based cooperative transmission. In this paper, we consider a scheme in which the cooperation is triggered only if the source–destination channel is of an unacceptable quality. Therefore, the destination selects one relay out of a decoding set of relays for cooperation. We analyze the end-to-end outage probability in slow and fast fading environments and we evaluate the usefulness of relaying when the source acts blindly and ignores the decision of the selected relay whether it may cooperate or not. The performance in both environments are evaluated through analysis and simulations in terms of end-to-end outage probability and the number of active relays. Some selected performance results show that some selected computer simulation based results coincide with our analytical results.     

Weak solutions for immiscible compressible multifluid flows in porous media

We consider a multifluid flow model describing evolution of pressures and relative saturations of non-miscible and compressible phases in porous media. This model is obtained by a macroscopic representation of the flow. It takes into account capillary effects and velocity fields are described by Darcy laws. Global weak solutions for such a model is introduced. To cite this article: C. Galusinski, M. Saad, C. R. Acad. Sci. Paris, Ser. I 347 (2009).     

Cyclic poly(pyridine ether)s by the polycondensation of 2,6‐difluoropyridine with various diphenols

The bistrimethylsilyl derivatives of six different diphenols were polycondensed with 2,6‐difluoropyridine in N‐methylpyrrolidone in the presence of K₂CO₃. On the basis of previous studies, the reaction conditions were optimized for almost quantitative conversions. The feed ratio was systematically varied to optimize the molecular weight. A 2 mol % excess of 2,6‐difluoropyridine was needed to obtain maximum molecular weights. In the matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) mass spectra of the optimized polyethers, only cycles were found (detectable up to 5000 Da). Obviously, the relatively low molecular weights obtained under optimized conditions resulted from a limitation of the chain growth by cyclization, indicating a high cyclization tendency for poly(pyridine ether)s. The size exclusion chromatography measurements not only proved low molecular weights but also demonstrated the existence of bimodal mass distributions and high polydispersities. Protonation of the poly(pyridine ether)s required strong acids such as methane or trifluoromethane sulfonic acid. The solubilities of the neutral and protonated polyethers derived from bisphenol A were studied in various solvents. The MALDI‐TOF mass spectra proved that protonation at 20–25 °C did not cause cleavage of ether bonds. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4781–4789, 2005