Electrochemistry of niobium(V) in sulfuric and methanesulfonic acids: formation of the Nb3O2(SO4)6(H2O)(3)(5-) cluster and designed electrochemical generation of "Nb3O2" core clusters by double potential pulse electrolysis

The electrochemical and spectroelectrochemical properties of niobium(V) and the Nb(3)O(2)(SO(4))(6)(H(2)O)(3)(5-) cluster in sulfuric acid and methanesulfonic acid were investigated using cyclic voltammetry, constant potential electrolysis, and spectroelectrochemistry. These chemical systems were suitable to probe the formation of "Nb(3)O(2)" core trinuclear clusters. In 9 M H(2)SO(4) the cluster Nb(3)O(2)(SO(4))(6)(H(2)O)(3)(5-) exhibited a reversible 1-electron reduction peak at E(pc) = -1.30 V vs Hg/Hg(2)SO(4) electrode, as well as a 4-electron irreversible oxidation peak at E(pa) = -0.45 V. Controlled potential reduction at E = -1.40 V produced the green Nb(3.33+) cluster anion Nb(3)O(2)(SO(4))(6)(H(2)O)(3)(6-). In 12 M H(2)SO(4) Nb(V) displayed two reduction peaks at E(pc) = -1.15 V and E(pc) = -1.30 V. It was determined that the first process involves a quasi-reversible 2-electron reduction. After reduction of Nb(V) to Nb(III) the following chemical step involves formation of [Nb(III)](2) dimer, which further reacts with Nb(V) to produce the Nb(3)O(2)(SO(4))(6(H(2)O)(3)(5-) cluster (ECC process). The second reduction peak at E(pc) = -1.30 V corresponds to further 2-electron reduction of Nb(III) to Nb(I). The electrogenerated Nb(I) species also chemically reacts with starting material Nb(V) to produce additional [Nb(III)](2). In 5 M H(2)SO(4), the rate of the second chemical step in the ECC process is relatively slower and reduction of Nb(V) at E = -1.45 V/-1.2 V produces a mixture of Nb(3)O(2)(SO(4))(6)(H(2)O)(3)(5-) and [Nb(III)](2) dimer. [Nb(III)](2) can be selectively oxidized by two 2-electron steps at E = -0.65 V to Nb(V). However, if the oxidation is performed at E = -0.86 V, the product is Nb(3)O(2)(SO(4))(6)(H(2)O)(3)(5-). A double potential pulse electrolysis waveform was developed to direct the reduction of Nb(V) toward selective formation of the Nb(3)O(2)(SO(4))(6)(H(2)O)(3)(5-) cluster. Proper application of dc-voltage pulses alternating between E(1) = -1.45 V and E(2) = -0.86 V yields only the target trinuclear cluster. Analogous double potential pulse electrolysis of Nb(V) in methanesulfonic acid generates the "Nb(3)O(2)" core cluster Nb(3)O(2)(CH(3)SO(3))(6)(H(2)O)(3)(+).     

Matrix-dependent instability of selenium(IV) stored in teflon containers

Solutions of selenium(IV) standards with different acid matrices were stored in containers constructed of boosilicate glass, conventional polyethylene, and fluorinated ethylenepropylene (teflon FEP). After 50 days of storage in FEP, there were highly significant losses of Se(IV) from standards in either 5% HCl/5% H₂SO₄, or 5% H₂SO₄. Increasing the hydrochloric acid concentration, e.g., 15% HCl/5% H₂SO₄, greatly reduced this loss. Addition of selenium-75 (selenate-free) indicated that the losses did not result from physical adsorption onto container surfaces. It is shown that the losses were caused by oxidation of Se(IV) to Se(VI).     

Structural characterization of a lanthanum bistriflimide complex, La(N(SO2CF3)2)3(H2O)3, and an investigation of La, Sm, and Eu electrochemistry in a room-temperature ionic liquid, [Me3N(n)Bu][N(SO2CF3)2

The reduction of selected lanthanide cations to the zerovalent state in the room-temperature ionic liquid [Me3N(n)Bu][TFSI] is reported (where TFSI = bistriflimide, [N(SO2CF3)2]-). The lanthanide cations were introduced to the melt as the TFSI hydrate complexes [Ln(TFSI)3(H2O)3] (where Ln = La(III), Sm(III) or Eu(III)). The lanthanum compound [La(TFSI)3(H2O)3] has been crystallographically characterized, revealing the first structurally characterized f-element TFSI complex. The lanthanide in all three complexes was shown to be reducible to the metallic state in [Me3N(n)Bu][TFSI]. For both the Eu and Sm complexes, reduction to the metallic state was achieved via divalent species, and there was an additional observation of the electrodeposition of Eu metal.     

Strontium-89- und Strontium-90-Bestimmungen bei der Entwicklung Graphitmoderierter Hochtemperaturreaktoren

A summary is given about hitherto studied and applied versions of sample pretreatment and separation techniques of⁸⁹Sr and⁹⁰Sr from fission and activation products in plate-out experiments for security studies of graphite moderated gas cooled high temperature pebble bed reactors. The latest and most succesfully applied version with a combined double-column system is described and its performance and results are discussed in detail.     

Subpicosecond pulse generation in synchronously pumped and hybrid ring dye lasers

Subpicosecond pulse generation has been examined in synchronously pumped mode-locked ring dye laser systems. These include hybrid and composite absorber/gain media arrangements as well as a simple synchronous cavity. The shortest pulses recorded were 0.3 ps for the hybrid system, and this has been shown to be critically dependent on the positioning of the absorber jet in the centre of the cavity to better than 50 m. Stable operation for subpicosecond pulse generation has been achieved in the ring configuration with greater wavelength tunability and higher average power conversion efficiency than with conventional cavity arrangements.     

Protonation and sodium ion-pairing of the sulfite ion in concentrated aqueous electrolyte solutions

A protocol has been developed for the reliable titration of aqueous sulfite solutions which minimizes photodecomposition effects. This procedure has been used to measure the protonation constants of the sulfite ion in aqueous solution by glass electrode potentiometry at 25.0‡C and ionic strengths (I) from 0.1 to 5.0M in NaCI media and atI = 1.0M in KC1 and Me₄NCl media. These measurements provided evidence of weak but significant ionpairing between SO2/3 -and Na⁺ with a formation constant of logK _Na = 0.431 in 1.0M Me₄NCl. This was in very good agreement with the value logK _Na = 0.410 measured directly by Na⁺ ion-selective electrode potentiometry. Evidence is also presented for an extremely weak association of K⁺ and SO ₂ ³ -with logK _k = 0.22 in 1.0M Me₄NCl.     

High yielding synthesis of 3a-hydroxypyrrolo[2,3-b]indoline dipeptide methyl esters: synthons for expedient introduction of the hydroxypyrroloindoline moiety into larger peptide-based natural products and for the creation of tryptathionine bridges

This work describes a rapid and high yielding oxidation of 14 tryptophanylated amino acid methyl esters to the corresponding 3a-hydroxypyrrolo[2,3-b]indoline (Hpi) amino acids with generally facile separation of syn-cis and anti-cis diastereomers. Structural X-ray diffraction data are presented for both diastereomers of Tr-Hpi-Gly-OMe, which allow for a putative assignment of the other 13 pairs of diastereomers reported herein, based on correlations with 1H NMR chemical shifts. Selective and high yielding deprotection at either the N or C terminus is described, allowing the Hpi motif to be introduced efficiently into potential targets with minimal protecting group manipulation. Two tripeptides containing Hpi and cysteine were prepared and treated with acid in the Savige-Fontana reaction to produce a cyclic tryptathionine linkage, characteristic of both amatoxins and phallotoxins.     

Ab initio potential energy surface for Ar 3 +

The potential energy surface (PES) of linear Ar ₃ ⁺ is calculated at the MP4/6-31G* level including all single, double, triple and quadruple excitations. The results show that the PES of the linear Ar ₃ ⁺ has a very flat valley along the asymmetric stretching vibration normal mode, ν₃. A higher level quadratic configuration interaction calculation including single, double and triple substitutions QCISD (T) along this flat valley suggests that an asymmetric geometry energy minimum reported earlier based on MP2 [1] is due to symmetry breaking in UHF. The global minimum of the PES is found to be for the symmetric geometry atR _ab =R _bc =2.66±0.01 Å, which is in good agreement with the MRD-CI calculation [2] and expectations from our earlier photodissociation experiments [3]. The calculational results are compared with other theoretical calculations, and are discussed in the context of the photodissociation and dynamics of dissociation experiments conducted on Ar ₃ ⁺ .     

Improved procedure for the synthesis of thiazolium-type peptide coupling reagents: BMTB as a new efficient reagent

An efficient scalable synthesis of 2-halothiazolium-type peptide coupling reagents has been developed. The key step is the formation of the 2-bromothiazole scaffold through cyclization of α-thiocyanato ketones with hydrogen bromide. Using this method, the new coupling reagent 2-bromo-N-methylthiazolium bromide (BMTB) was synthesized. BMTB was tested in a difficult model coupling reaction of two sterically hindered N-methylated amino acids and showed higher activity than the well-established peptide coupling reagent HATU.     

Limit on right handed weak coupling parameters from inelastic neutrino interactions

Right handed weak quark currents coupled to the usual left handed weak lepton current would be seen in inclusive antineutrino scattering on nuclei as a contribution at largey with the quark (not antiquark) structure function. We do not see such a term, and can therefore put an upper limit on the relative strengths of such right handed currents: \(\varrho ^2 = \frac{{\sigma _R }}{{\sigma _L }}< 0.009\) , 90% confidence. This measurement puts limits on the mixing angle of left-right symmetric models. In distinction to similar limits derived from muon decay or β decay, our limits are also valid if the right handed neutrino is heavy.