Synthesis,Aromaticity, and Application of peri-Pentacenopentacene: Localized Representation of Benzenoid Aromatic Compounds

We report the synthesis and optoelectronic properties of TIPS-peri-pentacenopentacene ( TIPS-PPP ), a vertical extension of TIPS-pentacene ( TIPS-PEN ) and a low-band-gap material with remarkable stability. We found the synthetic conditions to avoid the competition between 1,2- and 1,4-addition of lithium acetylide on the large aromatic dione. The high stability of TIPS-PPP is due to the peri-fusion which increases the aromaticity by generating two localized aromatic sextets that are flanked with 2 diene fragments, similar to two fused-anthracenes. Like TIPS-PEN , TIPS-PPP shows the archetypal 2D brickwall motif in crystals with a larger transfer integral and smaller reorganization energy. The high mobility of up to 1 cm² V^?1 s^?1 was obtained in an organic field-effect transistor fabricated by a wet process. Also, TIPS-PPP was used as a near-infrared (NIR) emitter for NIR organic-light-emitting-diode devices resulting in a high external quantum efficiency at 800 nm.     

Complex formation of light and heavy lanthanides with DGA and DOODA,and its application to mutual separation in DGA–DOODA extraction system

We studied the stepwise formation constants (β) of water-soluble diglycolamide (DGA) and dioxaoctanediamide (DOODA) for the mutual separation of Ln in a solvent extraction system. TODGA (N,N,N?,N?-tetraoctyl-diglycolamide) and DOODA(C8) (N,N,N?,N?-tetraoctyl-dioxaoctanediamide) exhibit opposite behaviors in extracting both light and heavy Ln through Ln-patterns. Metal complexes of two- and three-folding with water-soluble DOODA and DGA, respectively, were found, and each β value was calculated using distribution ratios. Taking β, their distribution ratio, D, and separation factor, SF, values into consideration, the suitable separation conditions (aqueous phase: 30 mM DOODA(C2) in 1 M HNO₃; organic phase: 0.1 M TODGA in n-dodecane) of multistage extraction (10?×?10 extraction using aqueous and organic phases, including one sample solution) were determined. In this study, La, Pr, and Nd were mainly present in the aqueous phase, whereas Sm–Dy existed in the organic phase. Although these two groups can be easily separated into two phases, the resolution, Rs, values provide for little mutual separation between La–Nd and Sm–Dy under the present conditions.

     

Enzymatic Hydrolysis-Responsive Supramolecular Hydrogels Composed of Maltose-Coupled Amphiphilic Ureas

Maltose is a ubiquitous disaccharide produced by the hydrolysis of starch. Amphiphilic ureas bearing hydrophilic maltose moiety were synthesized via the following three steps: I) construction of urea derivatives by the condensation of 4-nitrophenyl isocyanate and alkylamines, II) reduction of the nitro group by hydrogenation, and III) an aminoglycosylation reaction of the amino group and the unprotected maltose. These amphiphilic ureas functioned as low molecular weight hydrogelators, and the mixtures of the amphipathic ureas and water formed supramolecular hydrogels. The gelation ability largely depended on the chain length of the alkyl group of the amphiphilic urea; amphipathic urea having a decyl group had the highest gelation ability (minimum gelation concentration=0.4 mM). The physical properties of the supramolecular hydrogels were evaluated by measuring their thermal stability and dynamic viscoelasticity. These supramolecular hydrogels underwent gel-to-sol phase transition upon the addition of α-glucosidase as a result of the α-glucosidase-catalyzed hydrolysis of the maltose moiety of the amphipathic urea.     

Controlling Energy Gaps of π-Conjugated Polymers by Multi-Fluorinated Boron-Fused Azobenzene Acceptors for Highly Efficient Near-Infrared Emission

We demonstrate that multi-fluorinated boron-fused azobenzene (BAz) complexes can work as a strong electron acceptor in electron donor-acceptor (D-A) type π-conjugated polymers. Position-dependent substitution effects were revealed, and the energy level of the lowest unoccupied molecular orbital (LUMO) was critically decreased by fluorination. As a result, the obtained polymers showed near-infrared (NIR) emission (λ_PL=758–847 nm) with high absolute photoluminescence quantum yield (Φ_PL=7–23%) originating from low-lying LUMO energy levels of the BAz moieties (−3.94 to −4.25 eV). Owing to inherent solid-state emissive properties of the BAz units, deeper NIR emission (λ_PL=852980 nm) was detected in film state. Clear solvent effects prove that the NIR emission is from a charge transfer state originating from a strong D-A interaction. The effects of fluorination on the frontier orbitals are well understandable and predictable by theoretical calculation with density functional theory. This study demonstrates the effectiveness of fluorination to the BAz units for producing a strong electron-accepting unit through fine-tuning of energy gaps, which can be the promising strategy for designing NIR absorptive and emissive materials.     

Single-mode single-polarization holey fiber using anisotropic fundamental space-filling mode

We present the single-mode single-polarization regime of a circular-hole holey fiber consisting of a core with large elliptical holes. The elliptical holes in the core, which produce large anisotropies, split the fundamental mode into two orthogonally polarized fundamental modes, often referred to as slow and fast modes. This fiber can guide only one polarization state of the fundamental mode when a fundamental space-filling mode index of the cladding region is designed to lie between these indices of the slow and fast modes of the core region. We demonstrate one design example of this fiber and show that the single-polarization regime can be achieved over a wide wavelength range.     

Dual Catalysis with Copper and Rhenium for Trifluoromethylation of Propargylic Alcohols: Efficient Synthesis of α‐Trifluoromethylated Enones

Trifluoromethylation of propargylic alcohols to provide (Z)‐α‐trifluoromethylated enones and β‐unsubstituted α‐trifluoromethylated enones proceeded with high yield and selectivity in the presence of CuI/Re₂O₇. The Z isomer was formed under kinetic control, though it is less stable than the E isomer in terms of steric repulsion.     

Assembly of Na3V2(PO4)3 Nanoparticles Confined in a One‐Dimensional Carbon Sheath for Enhanced Sodium‐Ion Cathode Properties

Structural and morphological control is an effective approach for improvement of electrochemical properties in rechargeable batteries. One‐dimensionally assembled structure composed of NASICON‐type Na₃V₂(PO₄)₃ nanoparticles were fabricated through an electrospinning method to meet the requirements for the development of efficient electrode materials in Na‐ion batteries. High‐temperature treatment of electrospun precursor fibers under an argon flow provides a nonwoven fabric of nanowires comprising crystallographically oriented nanoparticles of NASICON‐type Na₃V₂(PO₄)₃ within a carbon sheath. The mesostructure comprising NASICON‐type Na₃V₂(PO₄)₃ and carbon give a short sodium‐ion transport pass and an efficient electron conduction pass. Electrochemical properties of NASICON‐type Na₃V₂(PO₄)₃ are improved on the basis of one‐dimensional nanostructures designed in the present study.     

Direct Asymmetric Mannich‐Type Reaction of α‐Isocyanoacetates with Ketimines using Cinchona Alkaloid/Copper(II) Catalysts

The enantioselective direct Mannich‐type reaction of ketimines with α‐isocyanoacetates has been developed. Excellent yields and enantioselectivity were observed for the reaction of various ketimines and α‐isocyanoacetates using cinchona alkaloid/Cu(OTf)₂ and a base. Both enantiomers of the products could be obtained by using pseudoenantiomeric chiral catalysts. This process offers an efficient route for the synthesis of α,β‐diamino acids.     

Wrinkles formed on a thin gold film deposited onto stretched elastic substrates

In this article the possibility of using various elastic polymer substrates for preparing wrinkled gold films was studied. The gold film was deposited on the substrate using an ion‐sputtering technique, while the substrate was stretched and fixed on a frame. The obtained gold film had wrinkles with a striped pattern. However, whether the pattern was well regulated or not depended on the substrate material. Polydimethylsiloxane (PDMS) was the preferable material when it did not contain fillers. Materials containing fillers are not suitable for this purpose. However, double layer substrates that consist of the PDMS without fillers (the upper layer) and the material containing fillers (the lower layer) could be used to obtain a relatively well‐ordered pattern. Copyright © 2005 John Wiley & Sons, Ltd.