Slurry sampling techniques for the determination of lead in Bangladeshi fish samples by electrothermal atomic absorption spectrometry with a metal tube atomizer

Ultrasonic slurry sampling electrothermal atomic absorption spectrometry with a metal tube atomizer has been applied to the determination of lead in Bangladeshi fish samples. The slurry sampling conditions, such as slurry stabilizing agent, slurry concentration, pyrolysis temperature for the slurried fish samples, particle size and ultrasonic agitation time, were optimized for electrothermal atomic absorption spectrometry with the Mo tube atomizer. Thiourea was used as the chemical modifier for the interference of matrix elements. The detection limit was 53 fg (3S/N). The determined amount of lead in Bangladeshi fish samples was consistent with those measured in the dissolved acid-digested samples. The advantages of the proposed methods are easy calibration, simplicity, low cost and rapid analysis.     

Constituents of Crinoidea, 4. Isolation and structure of ceramides and glucocerebrosides from the feather star Comanthus japonica

Five ceramides, JC-1-JC-5, and four glucocerebrosides, JCer-1-JCer-4, have been isolated from their parent ceramide and glucocerebroside molecular species JC and JCer obtained from the less polar lipid fraction of the chloroform/methanol extract of the feather star Comanthus japonica. The structures of these sphingolipids have been determined on the basis of chemical and spectroscopic evidence. Reversed-phase HPLC was effective at isolating these sphingolipids, revealing very close resemblance in their structures. JC-1, JC-3, JC-4, JC-5 and JCer-2, JCer-4 are newly found ceramides and glucocerebrosides, respectively.     

Effect of initiators on grafting in the initial stage of the emulsion polymerization of methyl methacrylate using poly(vinyl alcohol) as a protective colloid

 To make clear the reason of unsuitability of poly(vinyl alcohol) (PVA) protective colloid for the emulsion polymerization of conjugated monomers, a model experiment of emulsion polymerization of methyl methacrylate (MMA) was carried out with ammonium persulfate (APS) or azobis(isobutyronitrile) (AIBN) initiators, where a small amount of MMA (1/100th of the concentration compared with ordinary emulsion polymerization) was employed. This corresponds to the initial stage of the emulsion polymerization. Grafting of MMA onto PVA took place remarkably irrespective of the kind of the initiators. Formation of homo-poly(MMA) was observed to a small extent. The formation of new emulsion particles smaller than 100 nm continued to increase to almost the end of the polymerization. PVA molecules in the grafted polymer are supposed to act as stabilizers of newly formed particles. From kinetic treatment using the experimental data, the important issues were derived as follows. Firstly, the sulfate anion radical from APS is much more reactive than the isobutyronitrile radical from AIBN in terms of hydrogen abstraction from PVA. Secondly, high grafting ability of the latter initiator system, notwithstanding the much lower reactivity in the hydrogen abstraction compared with the APS system, is attributed to the relative reactivity of the primary radicals, i.e., hydrogen abstraction reaction from PVA to initiation reaction with MMA. The much slower rate of addition of the isobutyronitrile radical to the monomer compared with that of hydrogen abstraction from PVA facilitates the grafting, although the rate constant of hydrogen abstraction is far smaller than that with the sulfate anion radical by 10⁻⁴ times. Received: 26 April 2001 Accepted: 6 September 2001     

A potentiometric microbial sensor based on immobilized escherichia coli for glutamic acid

The sensor consists of immobilized E. coli (which contains glutamate decarboxylase) and a carbon dioxide gas-sensor. Continuous introduction of sample solution into a flow system incorporating the sensor gives a potential which increases until a steady state is reached after 5 min. Measurements can also be made with only a 1- or 3-min introduction period with little loss of sensitivity. Calibration plots of mV measurements vs. logarithmic glutamic acid concentration are linear in the range 100–800 mg l^-1. The sensor is highly selective, stable and reproducible. It has been applied to the determination of glutamic acid in fermentation broths.     

Isolation and structure determination of six glucocerebrosides from the starfish Luidia maculata

Two new glucocerebrosides, luidiacerebroside A (2) and B (6), were isolated from the cerebroside molecular species obtained from the less polar fraction of the CHCl3/MeOH extract of the starfish Luidia maculata using HPLC. Four known cerebrosides, CE-2b (1), astrocerebroside B (3), acanthacerebroside B (4), and CE-3-2 (5) have also been isolated and characterized. The structures of these cerebrosides were determined on the basis of chemical and spectroscopic evidence. Mass spectrometry of dimethyl disulfide derivatives was useful for the determination of the double-bond position in the long-chain base.     

Multipoint recognition of catecholamines by hydrindacene-based receptors accompanied by the complexation-induced conformational switching

The molecular recognition of catecholamines by hydrindacene-based receptors 1 and 2, as well as the durene-based receptor 3, and the guest-induced conformational changes are reported. These receptors selectively bind adrenaline and dopamine salts through the guests' ammonium group and 3-hydroxyl group on the aromatic ring. In the case of adrenaline, an additional hydrogen bond with a benzylic hydroxyl group is formed. In 2 % CD3CN/CDCl3, the association constants are of the order of 10(4) M(-1), which is much larger than with guests without the 3-hydroxyl groups (10(3) M(-1)). The two amide groups of receptor 1 can rotate freely around the C(aromatic)--C(amide) bond, whereas the tert-amide in 2 changes between two stable conformations at a slow enough rate to allow detection by (1)H NMR spectroscopy. In the absence of a guest molecule, the syn-conformer is less stable than the anti-conformer. On complex formation with adrenaline, the syn-conformer becomes dominant due to an intramolecular dipole-reversal effect in addition to multipoint hydrogen bonding.     

Continuous flow system for the determination of trace vanadium in natural waters utilizing in-line preconcentration/separation coupled with catalytic photometric detection

A sensitive and rapid method is presented for the determination of vanadium at ng to sub-ng ml(-1) levels in natural waters, in which in-line preconcentration/separation is directly coupled with catalytic detection of vanadium in a flow-injection system. Vanadium was adsorbed on a small column packed with Sephadex G-25 gel and desorbed with a small volume of 0.010 M HCl. The catalytic action of vanadium on the oxidation of chromotropic acid (1,8-dihydroxy-3,6-naphthalenedisulphonic acid) by bromate in pH 3.8 buffered media was used in the sensitive determination of vanadium. Effective preconcentration/separation of trace vanadium can be achieved from Fe(III), Cu(II) and a large excess of sodium chloride in seawater sample. A linear calibration using a 5 m sample loop was obtained for vanadium in the range 0-2.5 ng ml(-1). The limit of detection was 0.02 ng ml(-1) and the relative standard deviation was 1.2% for 1.0 ng ml(-1) vanadium (n=5). The present FIA system is rapid and sensitive and can be readily applied to river water and coastal seawater samples.